cim_fibreporteventcounters.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00751.003" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_FibrePortEventCounters
// ==================================================================
   [Deprecated { "CIM_FCPortStatistics" },
       UMLPackagePath ( "CIM::Device::NetworkAdapter" ),
       Version ( "2.10.0" ), Description (
       "Note: The use of the FibrePortEventCounters class is "
       "deprecated because FibrePort is deprecated. FCPortStatistics "
       "should be used instead, but it redefines the level at which "
       "data is collected. Therefore, there is no direct translation "
       "of the individual counters between the two classes. Deprecated "
       "description: This object defines error counters that are "
       "specific to a FibrePort.")]
class CIM_FibrePortEventCounters : CIM_DeviceStatisticalInformation {

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of login frames "
          "received."), 
       Counter]
   uint64 PLOGIsReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of login frames sent."), 
       Counter]
   uint64 PLOGIsSent;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: Number of frames received that "
          "contain 'EOF Abort'."), 
       Counter]
   uint64 EOFAbortsReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: Number of frames transmitted that "
          "contain 'EOF Abort'."), 
       Counter]
   uint64 EOFAbortsTransmitted;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of logouts that were "
          "received from various targets."), 
       Counter]
   uint64 PLOGOsReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of logout frames sent."), 
       Counter]
   uint64 PLOGOsSent;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of PLOGI frames sent "
          "where the response was LS_RJT."), 
       Counter]
   uint64 PLOGIsRejected;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of PLOGO frames sent "
          "where the response was LS_RJT."), 
       Counter]
   uint64 PLOGOsRejected;

      [Deprecated { "CIM_FCPortStatistics.ResetSelectedStats" }, 
       Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: Method to reset the Port event "
          "counters. The method takes as input an integer that "
          "indicates which counter to reset. For this input parameter, "
          "0 indicates all and 1 through 8 indicate a reset of the "
          "individual counters. The method returns 0 if successful, 1 "
          "if not supported, and any other value if an error occurred. "
          "A method is specified so that the instrumentation of the "
          "Device, which tabulates the errors and warnings, can also "
          "reset its internal processing and counters. \n"
          "In a subclass, the set of possible return codes could be "
          "specified, using a ValueMap qualifier on the method. The "
          "strings to which the ValueMap contents are 'translated' can "
          "also be specified in the subclass as a Values array "
          "qualifier.")]
   uint32 ResetCounter ( 
         [IN, Description (
             "The counter to reset."), 
          ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8" }, 
          Values { "All", "PLOGIsReceived", "PLOGIsSent",
             "EOFAbortsReceived", "EOFAbortsTransmitted",
             "PLOGOsReceived", "PLOGOsSent", "PLOGIsRejected",
             "PLOGOsRejected" }]
      uint16 SelectedCounter); 
};