cim_callbasedmodem.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00752.000" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_CallBasedModem
// ==================================================================
   [UMLPackagePath ( "CIM::Device::Modems" ), Abstract,
       Version ( "2.10.0" ), Description (
       "CIM_CallBasedModem is the superclass for grouping the numerous "
       "types of call-based modems. The POTSModem is a type of call- "
       "based Modem.")]
class CIM_CallBasedModem : CIM_Modem {

      [Description (
          "Indicates whether online fallback is enabled so that it can "
          "be negotiated by the Modem.")]
   boolean FallbackEnabled;

      [Description (
          "An array that enumerates all the compression protocols that "
          "are supported by the Modem."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9" }, 
       Values { "Unknown", "Other", "No Compression", "MNP 5",
          "V.42bis", "MNP 3", "MNP 4", "V.58", "PEP", "HST" }, 
       ModelCorrespondence { 
          "CIM_CallBasedModem.OtherCompressionDescription" }]
   uint16 CompressionSupported[];

      [Description (
          "Description of the compression type when \"Other \" "
          "(value=1) is defined in the CompressionSupported array. If "
          "there are multiple \"Other\" types, then combine their "
          "descriptions into a single string."), 
       ModelCorrespondence { "CIM_CallBasedModem.CompressionSupported" 
          }]
   string OtherCompressionDescription;

      [Description (
          "Describes the current data compression characteristics of "
          "the Modem."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9" }, 
       Values { "Unknown", "Other", "No Compression", "MNP 5",
          "V.42bis", "MNP 3", "MNP 4", "V.58", "PEP", "HST" }, 
       ModelCorrespondence { "CIM_CallBasedModem.CompressionSupported",
          "CIM_CallBasedModem.OtherCompressionInfoDescription" }]
   uint16 CompressionInfo;

      [Description (
          "Description of the current compression type when \"Other\" "
          "(value=1) is specified in the CompressionInfo property."), 
       ModelCorrespondence { "CIM_CallBasedModem.CompressionInfo" }]
   string OtherCompressionInfoDescription;

      [Description (
          "An array that enumerates all the modulation protocols that "
          "are supported by the Modem. The beginning entries in the "
          "Values qualifier array are mapped from the CIM_POTSModem "
          "ModulationScheme property."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15", "16", "17", "18", "19",
          "20", "21", "22", "23", "24", "25", "26", "27", "28", "29" }, 
       Values { "Unknown", "Other", "Not Supported", "Bell 103",
          "Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo", "V.FC",
          "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21", "V.22",
          "V.23 Constant Carrier (1200/75)",
          "V.23 Switched Carrier (Half Duplex)", "V.26bis", "V.26ter",
          "V.27ter (G3 Fax Call)", "V.29 HD (G3 Fax Call)",
          "V.34 HD (G3 Fax Call)", "V.90 Issue 1 (Asymmetric)",
          "V.90 Issue 2 (Symmetric)", "V.58", "X2", "K56FLEX",
          "V.Fast", "PEP", "HST" }, 
       ModelCorrespondence { 
          "CIM_CallBasedModem.OtherModulationDescription" }]
   uint16 ModulationSupported[];

      [Description (
          "Description of the current modulation type when \"Other\" "
          "(value=1) is specified in the ModulationSupported property. "
          "If there are multiple \"Other\" types, then combine their "
          "descriptions into a single string."), 
       ModelCorrespondence { "CIM_CallBasedModem.ModulationSupported" }]
   string OtherModulationDescription;

      [Description (
          "Describes the current modulation scheme of the Modem."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15", "16", "17", "18", "19",
          "20", "21", "22", "23", "24", "25", "26", "27", "28", "29" }, 
       Values { "Unknown", "Other", "Not Supported", "Bell 103",
          "Bell 212A", "V.22bis", "V.32", "V.32bis", "V.terbo", "V.FC",
          "V.34", "V.34bis", "V.17 (G3 Fax Call)", "V.21", "V.22",
          "V.23 Constant Carrier (1200/75)",
          "V.23 Switched Carrier (Half Duplex)", "V.26bis", "V.26ter",
          "V.27ter (G3 Fax Call)", "V.29 HD (G3 Fax Call)",
          "V.34 HD (G3 Fax Call)", "V.90 Issue 1 (Asymmetric)",
          "V.90 Issue 2 (Symmetric)", "V.58", "X2", "K56FLEX",
          "V.Fast", "PEP", "HST" }, 
       ModelCorrespondence { "CIM_CallBasedModem.ModulationSupported",
          "CIM_CallBasedModem.OtherSchemeDescription" }]
   uint16 ModulationScheme;

      [Description (
          "Description of the current modulation type when \"Other\" "
          "(value=1) is specified in the ModulationScheme property."), 
       ModelCorrespondence { "CIM_CallBasedModem.ModulationScheme" }]
   string OtherSchemeDescription;

      [Description (
          "An array that enumerates the error control protocols that "
          "are supported by the Modem. The beginning entries in the "
          "Values qualifier array are mapped from the CIM_POTSModem "
          "ErrorControlInfo property."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13" }, 
       Values { "Unknown", "Other", "No Error Correction", "MNP 4",
          "LAPM", "V.58", "ECP Enhanced Cellular Protocol",
          "ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2",
          "MNP 3", "MNP10", "PEP", "HST" }, 
       ModelCorrespondence { 
          "CIM_CallBasedModem.OtherErrorControlDescription" }]
   uint16 ErrorControlSupported[];

      [Description (
          "Description of the error control type when \"Other\" "
          "(value= 1) is specified in the ErrorControlSupported "
          "property. If there are multiple \"Other\" types, then "
          "combine their descriptions into a single string."), 
       ModelCorrespondence { "CIM_CallBasedModem.ErrorControlSupported" 
          }]
   string OtherErrorControlDescription;

      [Description (
          "Describes the current error correction characteristics of "
          "the Modem."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13" }, 
       Values { "Unknown", "Other", "No Error Correction", "MNP 4",
          "LAPM", "V.58", "ECP Enhanced Cellular Protocol",
          "ETC Enhanced Throughput Cellular", "MNP 1", "MNP 2",
          "MNP 3", "MNP10", "PEP", "HST" }, 
       ModelCorrespondence { 
          "CIM_CallBasedModem.ErrorControlSupported",
          "CIM_CallBasedModem.OtherErrorControlInfoDescription" }]
   uint16 ErrorControlInfo;

      [Description (
          "Description of the error control when \"Other\" (value=1) "
          "is defined as the value of the ErrorControlInfo property."), 
       ModelCorrespondence { "CIM_CallBasedModem.ErrorControlInfo" }]
   string OtherErrorControlInfoDescription;

      [Description (
          "Time of the last reset of the Modem.")]
   datetime TimeOfLastReset;

      [Description (
          "The rate at which the receiver and transmitter are or were "
          "last cooperating, on a call, before disconnection."), 
       Units ( "Bits per Second" )]
   uint32 CallSpeed;

      [Description (
          "Status of the Modem. For example, information regarding "
          "modem negotiation or whether the modem is connected (values "
          "8 and 9, respectively) can be conveyed in this property."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10" }, 
       Values { "Unknown", "Other", "Offline", "On Hook", "Dialing",
          "Waiting for Answer", "Ringing", "Modem Detected",
          "Negotiating", "Online", "Error" }]
   uint16 CallStatus;

      [Description (
          "Total number of characters sent by the Device on the last "
          "or current call. A call in-progress is indicated by the "
          "CallStatus property."), 
       Counter]
   uint32 CharsSent;

      [Description (
          "Total number of characters received by the Device on the "
          "last or current call. A call in-progress is indicated by "
          "the CallStatus property."), 
       Counter]
   uint32 CharsReceived;

      [Description (
          "Total number of characters lost by the Device on the last "
          "or current call. A call in-progress is indicated by the "
          "CallStatus property."), 
       Counter]
   uint32 CharsLost;

      [Description (
          "Total number of blocks sent by the Device on the last or "
          "current call. A call in-progress is indicated by the "
          "CallStatus property."), 
       Counter]
   uint32 BlocksSent;

      [Description (
          "Total number of blocks resent by the Device on the last or "
          "current call. A call in-progress is indicated by the "
          "CallStatus property."), 
       Counter]
   uint32 BlocksResent;

      [Description (
          "Total number of blocks received by the Device on the last "
          "or current call. A call in-progress is indicated by the "
          "CallStatus property."), 
       Counter]
   uint32 BlocksReceived;

      [Description (
          "Total number of block errors seen by the Device on the last "
          "or current call. A call in-progress is indicated by the "
          "CallStatus property."), 
       Counter]
   uint32 BlockErrors;

      [Description (
          "Length of the last or current call. A call in-progress is "
          "indicated by the CallStatus property. The 'interval' format "
          "of the datetime data type should be used for the property "
          "value.")]
   datetime CallLength;

      [Description (
          "Last or current number dialed to which the statistics "
          "apply, or NULL if the call was incoming.")]
   string NumberDialed;
};