cim_fibrechanneladapter.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00751.003" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_FibreChannelAdapter
// ==================================================================
   [Deprecated { "CIM_FCPort" },
       UMLPackagePath ( "CIM::Device::NetworkAdapter" ),
       Version ( "2.10.0" ), Description (
       "Note: The use of the CIM_FibreChannelAdapter class is "
       "deprecated, consistent with the deprecation of NetworkAdapter. "
       "Instead use CIM_FCPort. \n"
       "Deprecated description: This class describes the capabilities "
       "and management aspects of a Fibre Channel Adapter.")]
class CIM_FibreChannelAdapter : CIM_NetworkAdapter {

      [Deprecated { "CIM_NetworkPort.SupportedMaximumTransmissionUnit" 
          }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The maximum frame size, in bytes, "
          "supported by the Adapter."), 
       Units ( "Bytes" )]
   uint64 MaxFrameSize;

      [Deprecated { "CIM_FCPort.SupportedCOS" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The Fibre Channel Classes of "
          "Service that are supported by the Adapter, on its Ports. "
          "The currently negotiated COS for a connection is a property "
          "(NegotiatedCOS) on the FibrePort ActiveLogin association."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6" }, 
       Values { "Unknown", "1", "2", "3", "4", "6", "F" }]
   uint16 SupportedCOS[];

      [Deprecated { "CIM_FCPort.SupportedFC4Types" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: An array of integers that indicates "
          "the Fibre Channel FC-4 protocols that are supported by the "
          "Adapter. The protocols that are active and running are "
          "indicated in the CurrentFC4Types property. The values that "
          "are used in this array are taken from the FC-GS2 "
          "(bit-mapped) field defined in Table 11 of the standard. "
          "Also, FC-SB-2 codes are included from the T11 document, "
          "236V0. If the FC4 Type is \"Vendor Unique\" (value=255), "
          "then the specific vendor values (in the range, 0xE0 to "
          "0xFF) should be listed in the FC4VendorUniqueTypes "
          "property."), 
       ValueMap { "0", "1", "4", "5", "8", "9", "17", "18", "19", "21",
          "22", "23", "25", "26", "27", "28", "32", "34", "36", "64",
          "80", "81", "82", "88", "96", "255" }, 
       Values { "Unknown", "Other", "ISO/IEC 8802 - 2 LLC",
          "IP over FC", "SCSI - FCP", "SCSI - GPP", "IPI - 3 Master",
          "IPI - 3 Slave", "IPI - 3 Peer", "CP IPI - 3 Master",
          "CP IPI - 3 Slave", "CP IPI - 3 Peer", "SBCCS Channel",
          "SBCCS Control Unit", "FC-SB-2 Channel",
          "FC-SB-2 Control Unit",
          "Fibre Channel Services (FC-GS, FC-GS-2, FC-GS-3)", "FC-SW",
          "FC - SNMP", "HIPPI - FP", "BBL Control",
          "BBL FDDI Encapsulated LAN PDU",
          "BBL 802.3 Encapsulated LAN PDU", "FC - VI", "FC - AV",
          "Vendor Unique" }, 
       ModelCorrespondence { 
          "CIM_FibreChannelAdapter.FC4VendorUniqueTypes" }]
   uint16 FC4TypesSupported[];

      [Deprecated { "CIM_FCPort.SupportedFC4Types" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: When the FC4TypesSupported array "
          "contains the value 255 (\"Vendor Unique\"), then the "
          "property, FC4Vendor UniqueTypes, lists of all the "
          "vendor-specific protocols that are supported by the "
          "Adapter. These values are in the range 0xE0 to 0xFF."), 
       MinValue ( 240 ), MaxValue ( 255 )]
   uint16 FC4VendorUniqueTypes[];

      [Deprecated { "CIM_FCPort.ActiveFC4Types" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: An array of integers that indicate "
          "the Fibre Channel FC-4 protocols that are currently running "
          "on the Adapter. A list of all protocols that are supported "
          "by the Adapter is indicated in the FC4TypesSupported "
          "property. The values used in this array are taken from the "
          "FC-GS2 (bit-mapped) field that is defined in Table 11 of "
          "the standard. Also, FC-SB-2 codesare included from the T11 "
          "document, 236V0. If the FC4 Type is \"Vendor Unique\" "
          "(value=255), then the specific vendor values (in the range "
          "0xE0 to 0xFF) that are currently running should be listed "
          "in the CurrentFC4VendorTypes property."), 
       ValueMap { "0", "1", "4", "5", "8", "9", "17", "18", "19", "21",
          "22", "23", "25", "26", "27", "28", "32", "34", "36", "64",
          "80", "81", "82", "88", "96", "255" }, 
       Values { "Unknown", "Other", "ISO/IEC 8802 - 2 LLC",
          "IP over FC", "SCSI - FCP", "SCSI - GPP", "IPI - 3 Master",
          "IPI - 3 Slave", "IPI - 3 Peer", "CP IPI - 3 Master",
          "CP IPI - 3 Slave", "CP IPI - 3 Peer", "SBCCS Channel",
          "SBCCS Control Unit", "FC-SB-2 Channel",
          "FC-SB-2 Control Unit",
          "Fibre Channel Services (FC-GS, FC-GS-2, FC-GS-3)", "FC-SW",
          "FC - SNMP", "HIPPI - FP", "BBL Control",
          "BBL FDDI Encapsulated LAN PDU",
          "BBL 802.3 Encapsulated LAN PDU", "FC - VI", "FC - AV",
          "Vendor Unique" }, 
       ModelCorrespondence { 
          "CIM_FibreChannelAdapter.FC4TypesSupported",
          "CIM_FibreChannelAdapter.CurrentFC4VendorTypes" }]
   uint16 CurrentFC4Types[];

      [Deprecated { "CIM_FCPort.ActiveFC4Types" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: When the CurrentFC4Types array "
          "contains the value 255 (\"Vendor Unique\"), then the "
          "property, CurrentFC4 VendorTypes, lists all the "
          "vendor-specific protocols running on the Adapter. These "
          "values are in the range 0xE0 to 0xFF."), 
       MinValue ( 240 ), MaxValue ( 255 ), 
       ModelCorrespondence { 
          "CIM_FibreChannelAdapter.FC4VendorUniqueTypes" }]
   uint16 CurrentFC4VendorTypes[];

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: A list of the Capabilities of the "
          "Fibre Channel Adapter. For example, the capability that the "
          "Adapter utilizes the Directory Server, or that it generates "
          "State Change Notifications can be indicated using the "
          "values 2 and 12, respectively."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15" }, 
       Values { "Unknown", "Other", "Utilizes the Directory Server",
          "Utilizes the Time Server", "Utilizes the Management Server",
          "Utilizes the Alias Server",
          "Utilizes the Security Key Distribution Server",
          "Utilizes the Clock Synchronization Server",
          "Utilizes the Multicast Server", "Utilizes QoS Facilitator",
          "Utilizes Broadcast Services",
          "Supports Fabric Login Server",
          "Generates State Change Notifications",
          "Registers for State Change Notifications",
          "Responds to Read Connection Status",
          "Supports Third Party Process Logout" },
          ArrayType ( "Indexed" )]
   uint16 Capabilities[];

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: An array of free-form strings that "
          "provide more detailed explanations for any of the Adapter "
          "features that are indicated in the Capabilities array. "
          "Note, each entry of this array is related to the entry in "
          "the Capabilities array that is located at the same index."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_FibreChannelAdapter.Capabilities" }]
   string CapabilityDescriptions[];

      [Deprecated { "CIM_FCPortStatistics.ErrorFrames" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of times that a frame "
          "was received but no buffer was available."), 
       Counter]
   uint64 ReceiveBufferErrors;

      [Deprecated { "CIM_FCPortStatistics.ErrorFrames" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of times that a frame "
          "was received but no end-to-end credit was available."), 
       Counter]