cim_memory.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_Memory
// ==================================================================
   [UMLPackagePath ( "CIM::Device::Memory" ), Version ( "2.8.0" ), 
    Description (
       "Capabilities and management of Memory-related LogicalDevices.")]
class CIM_Memory : CIM_StorageExtent {

      [Description (
          "Volatile is a property that indicates whether this memory "
          "is volatile or not.")]
   boolean Volatile;

      [Override ( "ErrorMethodology" ), Description (
          "ErrorMethodology for Memory is a string property that "
          "indicates whether parity or CRC algorithms, ECC or other "
          "mechanisms are used. Details on the algorithm can also be "
          "supplied."), 
       MappingStrings { "MIF.DMTF|Physical Memory Array|001.7" }]
   string ErrorMethodology;

      [Description (
          "The beginning address, referenced by an application or "
          "operating system and mapped by a memory controller, for "
          "this Memory object. The starting address is specified in "
          "KBytes."), 
       Units ( "KiloBytes" ), 
       MappingStrings { "MIF.DMTF|Memory Array Mapped Addresses|001.3",
          "MIF.DMTF|Memory Device Mapped Addresses|001.4" }]
   uint64 StartingAddress;

      [Description (
          "The ending address, referenced by an application or "
          "operating system and mapped by a memory controller, for "
          "this Memory object. The ending address is specified in "
          "KBytes."), 
       Units ( "KiloBytes" ), 
       MappingStrings { "MIF.DMTF|Memory Array Mapped Addresses|001.4",
          "MIF.DMTF|Memory Device Mapped Addresses|001.5" }]
   uint64 EndingAddress;

      [Deprecated { "CIM_MemoryError.ErrorInfo" }, Description (
          "An integer enumeration describing the type of error that "
          "occurred most recently. For example, single (value=6) or "
          "double bit errors (7) can be specified using this property. "
          "The values, 12-14, are undefined in the CIM Schema since in "
          "DMI, they mix the semantics of the type of error and "
          "whether it was correctable or not. The latter is indicated "
          "in the property, CorrectableError."), 
       ValueMap { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10",
          "11", "12", "13", "14" }, 
       Values { "Other", "Unknown", "OK", "Bad Read", "Parity Error",
          "Single-Bit Error", "Double-Bit Error", "Multi-Bit Error",
          "Nibble Error", "Checksum Error", "CRC Error", "Undefined",
          "Undefined", "Undefined" }, 
       MappingStrings { "MIF.DMTF|Memory Device|005.12",
          "MIF.DMTF|Physical Memory Array|001.8" }, 
       ModelCorrespondence { "CIM_Memory.OtherErrorDescription" }]
   uint16 ErrorInfo;

      [Deprecated { "CIM_MemoryError.OtherErrorDescription" }, 
       Description (
          "Free form string providing more information if the Error "
          "Type property is set to 1, \"Other\". If not set to 1, this "
          "string has no meaning."), 
       ModelCorrespondence { "CIM_Memory.ErrorInfo" }]
   string OtherErrorDescription;

      [Deprecated { "CIM_MemoryError.CorrectableError" }, Description (
          "Boolean indicating that the most recent error was "
          "correctable. If the ErrorInfo property is equal to 3, "
          "\"OK\", then this property has no meaning."), 
       MappingStrings { "MIF.DMTF|Physical Memory Array|001.8" }]
   boolean CorrectableError;

      [Deprecated { "CIM_MemoryError.ErrorTime" }, Description (
          "The time that the last memory error occurred. The type of "
          "error is described by the ErrorInfo property. If the Error "
          "Info property is equal to 3, \"OK\", then this property has "
          "no meaning.")]
   datetime ErrorTime;

      [Deprecated { "CIM_MemoryError.ErrorAccess" }, Description (
          "An integer enumeration indicating the memory access "
          "operation that caused the last error. The type of error is "
          "described by the ErrorInfo property. If the ErrorInfo "
          "property is equal to 3, \"OK\", then this property has no "
          "meaning."), 
       ValueMap { "1", "2", "3", "4", "5" }, 
       Values { "Other", "Unknown", "Read", "Write", "Partial Write" }, 
       MappingStrings { "MIF.DMTF|Physical Memory Array|001.10" }]
   uint16 ErrorAccess;

      [Deprecated { "CIM_MemoryError.ErrorTransferSize" }, 
       Description (
          "The size of the data transfer in bits that caused the last "
          "error. 0 indicates no error. If the ErrorInfo property is "
          "equal to 3, \"OK\", then this property should be set to 0."), 
       Units ( "Bits" ), 
       MappingStrings { "MIF.DMTF|Physical Memory Array|001.11" }]
   uint32 ErrorTransferSize;

      [Deprecated { "CIM_MemoryError.ErrorData" }, Description (
          "Data captured during the last erroneous mebmory access. The "
          "data occupies the first n octets of the array necessary to "
          "hold the number of bits specified by the ErrorTransferSize "
          "property. If ErrorTransferSize is 0, then this property has "
          "no meaning."), 
       OctetString, 
       MappingStrings { "MIF.DMTF|Physical Memory Array|001.12" },
       ArrayType ( "Indexed" )]
   uint8 ErrorData[64];

      [Deprecated { "CIM_MemoryError.ErrorDataOrder" }, Description (
          "The ordering for data stored in the ErrorData property. "
          "\"Least Significant Byte First\" (value=1) or \"Most "
          "Significant Byte First\" (2) can be specified. If "
          "ErrorTransferSize is 0, then this property has no meaning."), 
       ValueMap { "0", "1", "2" }, 
       Values { "Unknown", "Least Significant Byte First",
          "Most Significant Byte First" }]
   uint16 ErrorDataOrder;

      [Deprecated { "CIM_MemoryError.StartingAddress" }, Description (
          "Specifies the address of the last memory error. The type of "
          "error is described by the ErrorInfo property. If the "
          "ErrorInfo property is equal to 3, \"OK\", then this "
          "property has no meaning."), 
       MappingStrings { "MIF.DMTF|Memory Device|005.19",
          "MIF.DMTF|Physical Memory Array|001.14" }]
   uint64 ErrorAddress;

      [Deprecated { "CIM_MemoryError.SystemLevelAddress" }, 
       Description (
          "Boolean indicating whether the address information in the "
          "property, ErrorAddress, is a system-level address (TRUE) or "
          "a physical address (FALSE). If the ErrorInfo property is "
          "equal to 3, \"OK\", then this property has no meaning.")]
   boolean SystemLevelAddress;

      [Deprecated { "CIM_MemoryError.ErrorResolution" }, Description (
          "Specifies the range, in bytes, to which the last error can "
          "be resolved. For example, if error addresses are resolved "
          "to bit 11 (ie, on a typical page basis), then errors can be "
          "resolved to 4K boundaries and this property is set to 4000. "
          "If the ErrorInfo property is equal to 3, \"OK\", then this "
          "property has no meaning."), 
       Units ( "Bytes" ), 
       MappingStrings { "MIF.DMTF|Memory Device|005.21",
          "MIF.DMTF|Physical Memory Array|001.15" }]
   uint64 ErrorResolution;

      [Deprecated { "CIM_MemoryError.AdditionalErrorData" }, 
       Description (
          "An array of octets holding additional error information. An "
          "example is ECC Syndrome or the return of the check bits if "
          "a CRC-based ErrorMethodology is used. In the latter case, "
          "if a single bit error is recognized and the CRC algorithm "
          "is known, it is possible to determine the exact bit that "
          "failed. This type of data (ECC Syndrome, Check Bit or "
          "Parity Bit data, or other vendor supplied information) is "
          "included in this field. If the ErrorInfo property is equal "
          "to 3, \"OK\", then AdditionalErrorData has no meaning."), 
       OctetString, 
       MappingStrings { "MIF.DMTF|Memory Device|005.18",
          "MIF.DMTF|Physical Memory Array|001.13" }]
   uint8 AdditionalErrorData[64];
};