cim_timezone.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_TimeZone
// ==================================================================
   [UMLPackagePath ( "CIM::System::Time" ), Version ( "2.6.0" ), 
    Description (
       "The TimeZone class is a set of properties defining a "
       "particular time zone. These properties include the concept of "
       "daylight saving time.")]
class CIM_TimeZone : CIM_Setting {

      [Key, Description (
          "Time zone identifier. The Id MAY be expressed in the form "
          "'area name/city name' (e.g., \"America/New_York\"), or as a "
          "time zone name (for example, EST or EDT).")]
   string TimeZoneID;

      [Key, Description (
          "The date and time at which this time zone definition takes "
          "effect. The value is specified in UTC.")]
   datetime TimeZoneStartDate;

      [Description (
          "Full name of the 'standard' time zone (e.g., \"U.S. Eastern "
          "Standard Time\"), suitable for presentation to the user in "
          "the default locale."), 
       ModelCorrespondence { "CIM_TimeZone.StandardCaption" }]
   string StandardName;

      [Description (
          "Short name of the 'standard' time zone (e.g., \"EST\"), "
          "suitable for presentation to the user in the default "
          "locale. Note that a specific StandardCaption property is "
          "defined, instead of using the inherited Caption. This is "
          "done to force consistent property naming for the "
          "StandardXXX and DaylightXXX properties."), 
       ModelCorrespondence { "CIM_TimeZone.StandardName" }]
   string StandardCaption;

      [Description (
          "The number of minutes by which this 'standard' time differs "
          "from UTC. For example, U.S. EST differs from UTC by -5.0 "
          "hours or -300 minutes, whereas Australia Adelaide Standard "
          "Time differs by 9.5 hours or 570 minutes."), 
       Units ( "Minutes" )]
   sint32 StandardOffset;

      [Description (
          "The month in which daylight saving time ends (and "
          "'standard' time begins). Specify 0 for January, 1 for "
          "February, and so on."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11" }, 
       Values { "January", "February", "March", "April", "May", "June",
          "July", "August", "September", "October", "November",
          "December" }, 
       ModelCorrespondence { "CIM_TimeZone.StandardDay" }]
   uint8 StandardMonth;

      [Description (
          "There are two different interpretations for this property, "
          "depending on the value of StandardDayOfWeek. In one case, "
          "StandardDay defines the day-in-month on which daylight "
          "saving time ends. This interpretation is used when the "
          "StandardDayOfWeek is 0. A positive or negative integer is "
          "specified to indicate whether the StandardDay should be "
          "calculated from the beginning or the end of the month. For "
          "example, 5 indicates the fifth day in the StandardMonth and "
          "-1 indicates the last day in the StandardMonth. \n"
          "\n"
          "When StandardDayOfWeek is not 0, StandardDay is the day- "
          "in-month on which daylight saving time ends, defined in "
          "conjunction with StandardDayOfWeek. For example, if "
          "StandardDay is 15 and StandardDayOfWeek is Saturday, then "
          "daylight saving time ends on the first Saturday on or after "
          "the 15th day in the StandardMonth (i.e., the third Saturday "
          "in the month). If StandardDay is 20 and StandardDayOfWeek "
          "is -Saturday, then this indicates the first Saturday on or "
          "before the 20th day in the StandardMonth. If StandardDay is "
          "-1 and StandardDayOfWeek is -Sunday, then this indicates "
          "the last Sunday in the StandardMonth."), 
       MinValue ( -31 ), MaxValue ( 31 ), 
       ModelCorrespondence { "CIM_TimeZone.StandardDayOfWeek" }]
   sint8 StandardDay;

      [Description (
          "Positive or negative integer used in conjunction with "
          "StandardDay to indicate the day of the week on which "
          "daylight saving time ends (and 'standard' time begins). "
          "StandardDayOfWeek is set to 0 to indicate an exact day of "
          "the month, such as March 1. A positive integer "
          "(representing Sunday, Monday, ..., Saturday) means that the "
          "day of week is found on or after the specified StandardDay. "
          "A negative integer (representing -Sunday, -Monday, ..., "
          "-Saturday) means that the day of week is found on or before "
          "the StandardDay."), 
       ValueMap { "-7", "-6", "-5", "-4", "-3", "-2", "-1", "0", "1",
          "2", "3", "4", "5", "6", "7" }, 
       Values { "-Saturday", "-Friday", "-Thursday", "-Wednesday",
          "-Tuesday", "-Monday", "-Sunday", "ExactDayOfMonth",
          "Sunday", "Monday", "Tuesday", "Wednesday", "Thursday",
          "Friday", "Saturday" }, 
       ModelCorrespondence { "CIM_TimeZone.StandardDay" }]
   sint8 StandardDayOfWeek;

      [Description (
          "The time interval after midnight when daylight saving time "
          "ends. For example, \n"
          "00000000020000.000000:000 \n"
          "indicates that daylight saving time ends at two o'clock, "
          "local time (usually, daylight saving time).")]
   datetime StandardStartInterval;

      [Description (
          "Full name of the 'daylight' time zone (e.g., \"U.S. Eastern "
          "Daylight Saving Time\"), suitable for presentation to the "
          "user in the default locale."), 
       ModelCorrespondence { "CIM_TimeZone.DaylightCaption" }]
   string DaylightName;

      [Description (
          "Short name of the 'daylight' time zone (e.g., \"EDT\"), "
          "suitable for presentation to the user in the default "
          "locale. Note that a specific DaylightCaption property is "
          "defined, instead of using the inherited Caption. This is "
          "done to force consistent property naming for the "
          "StandardXXX and DaylightXXX properties."), 
       ModelCorrespondence { "CIM_TimeZone.DaylightName" }]
   string DaylightCaption;

      [Description (
          "The number of minutes by which this daylight saving time "
          "differs from UTC. For example, U.S. EDT differs from UTC by "
          "-4.0 hours or -240 minutes, whereas Australia Adelaide "
          "Daylight Time differs by 10.5 hours or 630 minutes."), 
       Units ( "Minutes" )]
   sint32 DaylightOffset;

      [Description (
          "The month in which daylight saving time starts. Specify 0 "
          "for January, 1 for February, and so on."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11" }, 
       Values { "January", "February", "March", "April", "May", "June",
          "July", "August", "September", "October", "November",
          "December" }, 
       ModelCorrespondence { "CIM_TimeZone.DaylightDay" }]
   uint8 DaylightMonth;

      [Description (
          "There are two different interpretations for this property, "
          "depending on the value of DaylightDayOfWeek. In one case, "
          "DaylightDay defines the day-in-month on which daylight "
          "saving time starts. This interpretation is used when the "
          "DaylightDayOfWeek is 0. A positive or negative integer is "
          "specified to indicate whether the DaylightDay should be "
          "calculated from the beginning or the end of the month. For "
          "example, 5 indicates the fifth day in the DaylightMonth and "
          "-1 indicates the last day in the DaylightMonth. \n"
          "\n"
          "When DaylightDayOfWeek is not 0, DaylightDay is the day- "
          "in-month on which daylight saving time starts, defined in "
          "conjunction with DaylightDayOfWeek. For example, if "
          "DaylightDay is 15 and DaylightDayOfWeek is Saturday, then "
          "daylight saving time starts on the first Saturday on or "
          "after the 15th day in the DaylightMonth (i.e., the third "
          "Saturday in the month). If DaylightDay is 20 and "
          "DaylightDayOfWeek is -Saturday, then this indicates the "
          "first Saturday on or before the 20th day in the "
          "DaylightMonth. If DaylightDay is -1 and DaylightDayOfWeek "
          "is -Sunday, then this indicates the last Sunday in the "
          "month."), 
       MinValue ( -31 ), MaxValue ( 31 ), 
       ModelCorrespondence { "CIM_TimeZone.DaylightDayOfWeek" }]
   sint8 DaylightDay;

      [Description (
          "Positive or negative integer used in conjunction with "
          "DaylightDay to indicate the day of the week on which "
          "daylight saving time starts. Set DaylightDayOfWeek to 0 to "
          "indicate an exact day of month, such as March 1. Positive "
          "integer (Sunday, Monday, ..., Saturday) means that the day "
          "of week is found on or after DaylightDay. Negative integer "
          "(-Sunday, -Monday, ..., -Saturday) means that the day of "
          "week is found on or before DaylightDay."), 
       ValueMap { "-7", "-6", "-5", "-4", "-3", "-2", "-1", "0", "1",
          "2", "3", "4", "5", "6", "7" }, 
       Values { "-Saturday", "-Friday", "-Thursday", "-Wednesday",
          "-Tuesday", "-Monday", "-Sunday", "ExactDayOfMonth",
          "Sunday", "Monday", "Tuesday", "Wednesday", "Thursday",
          "Friday", "Saturday" }, 
       ModelCorrespondence { "CIM_TimeZone.DaylightDay" }]
   sint8 DaylightDayOfWeek;

      [Description (
          "The time interval after midnight when daylight saving time "
          "starts. For example, \n"
          "00000000020000.000000:000 \n"
          "indicates that daylight saving time starts at two o'clock, "
          "local time (usually, standard time).")]
   datetime DaylightStartInterval;
};