cim_diagnosticservicerecord.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_DiagnosticServiceRecord
// ==================================================================
   [UMLPackagePath ( "CIM::System::Diagnostics" ), Version ( "2.9.0" ), 
    Description (
       "While a DiagnosticService is running, data generated by the "
       "service may be recorded in DiagnosticServiceRecord objects. A "
       "DiagnosticServiceRecord is related to its MessageLog via an "
       "instance of the RecordInLog aggregation class.")]
class CIM_DiagnosticServiceRecord : CIM_DiagnosticRecord {

      [Description (
          "If applicable, this string should contain one or more "
          "vendor specific error codes that the diagnostic service "
          "detected. These error codes may be used by the vendor for "
          "variety of purposes such as: fault data base indexing, "
          "field service trouble ticketing, product quality tracking, "
          "part failure history, etc. Since these codes are for vendor "
          "purposes they may assume any form. Details on suggested use "
          "cases will be left to white papers. The array of error "
          "codes has model correspondence with an ErrorCount array so "
          "the number of errors reported can be analyzed by individual "
          "error code."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceRecord.ErrorCount" }]
   string ErrorCode[];

      [Description (
          "Since some tests may detect transient and correctable "
          "errors such as a network diagnostic or memory test, an "
          "error count is useful to indicate the severity of the "
          "failure. This field contains an integer value of the number "
          "of errors detected by the test. The ErrorCount is an array "
          "with model correspondence to ErrorCode so that the test can "
          "report an ErrorCount on each type of error encountered. It "
          "is recommended that hard errors and correctable or "
          "recoverable errors be given different codes so that clients "
          "with knowledge of the error codes can evaluate correctable, "
          "recoverable, and hard errors independently."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_DiagnosticServiceRecord.ErrorCode" }]
   uint32 ErrorCount[];

      [Description (
          "Since some tests may be looped, it is useful to report how "
          "many iterations passed and failed. This is relevant in "
          "analyzing transitory failures. For example, if all the "
          "errors occurred in just one of 100 iterations, the device "
          "may be viewed as OK or marginal, to be monitored further "
          "rather then failed. Note: LoopsPassed & LoopsFailed should "
          "add up to the loops completed. \n"
          "A value for this property would likely be reported with a "
          "DiagnosticServiceRecord.RecordType value = "
          "\"ResultSummary\", which contains a summary result covering "
          "all iterations of a looped service.")]
   uint32 LoopsFailed;

      [Description (
          "Since some tests may be looped, it is useful to report how "
          "many iterations passed and failed. This is relevant in "
          "analyzing transitory failures. For example if all the "
          "errors occurred in just one of 100 iterations, the device "
          "may be viewed as OK or marginal, to be monitored further "
          "rather then failed. Note: LoopsPassed & LoopsFailed should "
          "add up to the loops completed. \n"
          "A value for this property would likely be reported with a "
          "DiagnosticServiceRecord.RecordType value = "
          "\"ResultSummary\", which contains a summary result covering "
          "all iterations of a looped service.")]
   uint32 LoopsPassed;
};