cim_scsiprotocolendpoint.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="NetworksCR00062.000" type ="change">
// Move class from Experimental to Final in v2.11.</change>



// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SCSIProtocolEndpoint
// ==================================================================
   [UMLPackagePath ( "CIM::Network::ProtocolEndpoints" ),
       Version ( "2.11.0" ), Description (
       "A SCSIProtocolEndpoint represents the protocol (command) "
       "aspects of a logical SCSI port, independent of the "
       "connection/transport. SCSIProtocolEndpoint is either directly "
       "or indirectly associated to one or more instances of "
       "LogicalPort (via PortImplementsEndpoint) depending on the "
       "underlying transport. Indirect associations aggregate one or "
       "more LogicalPorts using intermediate ProtocolEndpoints (iSCSI, "
       "etc). SCSIProtocolEndpoint is also associated to a "
       "SCSIProtocolController, representing the SCSI device.")]

class CIM_SCSIProtocolEndpoint : CIM_ProtocolEndpoint {

      [Override ( "Name" ), Description (
          "The SCSI identifier for the target or initiator device, in "
          "the format appropriate for the ConnectionType. If a "
          "ConnectionType specific subclass is defined, the subclass "
          "may override Name to define the format. For other "
          "ConnectionTypes, the format (and content) should match that "
          "of PermamnentAddress of the corresponding LogicalPort."), 
       MaxLen ( 256 ), 
       MappingStrings { "SPC.INCITS-T10 |Protocol Specific Parameters | "
           "Name" }, 
       ModelCorrespondence { "CIM_SCSIProtocolEndpoint.ConnectionType",
          "CIM_SCSIProtocolEndpoint.OtherConnectionType" }]
   string Name;

      [Description (
          "The supported connection type for this endpoint. The "
          "connection type may be needed before the port(s) are "
          "associated and also is used in some SCSI commands."), 
       ValueMap { "1", "2", "3", "4", "5", "6", "7", "8", "9" }, 
       Values { "Other", "Fibre Channel", "Parallel SCSI", "SSA",
          "IEEE 1394", "RDMA", "iSCSI", "SAS", "ADT" }, 
       MappingStrings { "SPC.INCITS-T10 | Protocol Identifier | Values" 
          }, 
       ModelCorrespondence { "CIM_SCSIProtocolEndpoint.Name",
          "CIM_SCSIProtocolEndpoint.OtherConnectionType" }]
   uint16 ConnectionType;

      [Description (
          "For iSCSI, each SCSIProtocolEndpoint MUST act as either a "
          "target or an initiator endpoint. Other transports allow a "
          "SCSI PE to act as both an initiator and target endpoint. "
          "This property indicates which role this ProtocolEndpoint "
          "implements."), 
       ValueMap { "0" , "2", "3", "4" }, 
       Values { "Unknown", "Initiator", "Target",
          "Both Initiator and Target" }]
   uint16 Role;

      [Description (
          "For ports on a target device, the port number, relative to "
          "the storage system. 0 is reserved by T10, 1 is port A, 2 is "
          "port B, etc. These numbers are used in SCSI commands that "
          "operate on target port groups."), 
       MinValue ( 1 ), 
       MappingStrings { "SPC.INCITS-T10 | RelativeTargetPort | " 
          "IdentifierFormat" }]
   uint32 TargetRelativePortNumber;

      [Description (
          "The connection type, if ConnectionType is \"Other\"."), 
       ModelCorrespondence { "CIM_SCSIProtocolEndpoint.Name",
          "CIM_SCSIProtocolEndpoint.ConnectionType" }]
   string OtherConnectionType;
};