cim_spanningtreeservice.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SpanningTreeService
// ==================================================================
   [UMLPackagePath ( "CIM::Network::SwitchingBridging" ),
       Version ( "2.7.0" ), Description (
       "This service class represents the capability of a switch to "
       "participate in the distributed construction of a spanning "
       "tree.")]
class CIM_SpanningTreeService : CIM_ForwardingService {

      [Description (
          "The version of the spanning tree protocol used by the "
          "switch."), 
       ValueMap { "1", "2", "3" }, 
       Values { "Unknown", "DEC LB100", "IEEE 802d" }, 
       MappingStrings { 
          "MIB.IETF|BRIDGE-MIB.dot1dStpProtocolSpecification" }]
   uint16 ProtocolSpec;

      [Description (
          "The format of the priority bits are the first two octets of "
          "the 8-octet long Bridge ID. The other (last) 6 octets of "
          "the Bridge ID are given by the value of the Bridge Address. "
          "\n\n"
          "A priority that can be assigned to the switch for use in "
          "constructing the spanning tree. The unique identifier for a "
          "switch is constructed by concatenating the MAC address "
          "associated with the switch for spanning tree operations to "
          "the two-byte priority. Choice of the priority value "
          "influences election of the root bridge."), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpPriority" }]
   uint16 Priority;

      [Description (
          "MAC address used by the spanning tree service when it must "
          "be uniquely identified. When concatenated with a "
          "SpanningTreeService Priority, a unique bridge identifier "
          "results. This property is defined for use of switches "
          "supporting multiple spanning tree services. \n"
          "\n"
          "Note that the MAC address is formatted as twelve "
          "hexadecimal digits (e.g., \"010203040506\"), with each pair "
          "representing one of the six octets of the MAC address in "
          "\"canonical\" bit order according to RFC 2469.")]
   string SpanningTreeBridgeAddress;

      [Description (
          "The complete Bridge ID (Priority + MAC Address) of the root "
          "bridge. The format of the priority bits are the first two "
          "octets of the 8-octet long Bridge ID. Note that the MAC "
          "address is formatted as twelve hexadecimal digits (e.g., "
          "\"010203040506\"), with each pair representing one of the "
          "six octets of the MAC address in \"canonical\" bit order "
          "according to RFC 2469."), 
       MaxLen ( 16 ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpDesignatedRoot" }]
   string DesignatedRoot;

      [Description (
          "The cost of the path from the switch to the root."), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpRootCost" }]
   uint16 RootCost;

      [Description (
          "The port number of the port having the lowest cost path to "
          "the root bridge."), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpRootPort" }]
   uint16 RootPort;

      [Description (
          "The current value for the maximum age of Spanning Tree "
          "information before discard, as learned from the network."), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpMaxAge" }]
   uint32 MaxAge;

      [Description (
          "The current value of the interval between transmission of "
          "bridge PDUs by the switch, on any port for which it is the "
          "spanning tree root or trying to become so, as learned from "
          "the network."), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpHelloTime" }]
   uint32 HelloTime;

      [Description (
          "The minimum interval between transmission of bridge PDUs "
          "through a given port, as learned from the network."), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpHoldTime" }]
   uint32 HoldTime;

      [Description (
          "The time spent by a port in the listening state before "
          "transitioning to the learning state, and in the learning "
          "state before transitioning to the forwarding state, as "
          "learned from the network. This value is also used during "
          "the period of a topology change as the maximum age of "
          "Spanning Tree information before discard."), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpForwardDelay" }]
   uint32 ForwardDelay;

      [Description (
          "The MaxAge parameter to be used by all switches in the "
          "network if this switch becomes the root."), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpBridgeMaxAge" }]
   uint32 BridgeMaxAge;

      [Description (
          "The HelloTime parameter to be used by all switches in the "
          "network if this switch becomes the root."), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dStpBridgeHelloTime" }]
   uint32 BridgeHelloTime;

      [Description (
          "The ForwardDelay parameter to be used by all switches in "
          "the network if this switch becomes the root."), 
       Units ( "Hundredths of Seconds" ), 
       MappingStrings { 
          "MIB.IETF|BRIDGE-MIB.dot1dStpBridgeForwardDelay" }]
   uint32 BridgeForwardDelay;
};