cim_iscsisessionsettings.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="DMTFCR01621.000" type ="add">
// Add/Update ModelCorrespondence to reflect updates
// in iSCSISessionSettings (properties MaxConnectionsPerSession,
// DefaultTimeToWait,
// and DefaultTimeToRetain).</change>
// <change cr="NetworksCR00062.000" type ="change">
// Move class from Experimental to Final in v2.11.</change>



// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_iSCSISessionSettings
// ==================================================================
   [UMLPackagePath ( "CIM::Network::iSCSI" ), Version ( "2.11.0" ), 
    Description (
       "The default negotiation settings for an iSCSI Session. These "
       "properties are used as the starting position for login "
       "negotiations between initiator and target nodes. The "
       "properties describing the resulting outcome of the login "
       "negotiation are in the iSCSISession class. Depending on a "
       "given implementation an instance of iSCSISessionSettings will "
       "be associated by ElementSettingData to one or more instances "
       "of iSCSIProtocolEndpoint, SCSIProtocolController, or "
       "ComputerSystem.")]
class CIM_iSCSISessionSettings : CIM_SettingData {

      [Write, Description (
          "The maximum number of connections allowed in each session "
          "to and/or from this node."), 
       MinValue ( 1 ), MaxValue ( 65535 ), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeMaxConnections" }, 
       ModelCorrespondence { 
          "CIM_iSCSISession.MaxConnectionsPerSession" }]
   uint32 MaxConnectionsPerSession = 1;

      [Write, Description (
          "This property indicates the InitialR2T preference for this "
          "node: true = YES, false = will try to negotiate NO, will "
          "accept YES."), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeInitialR2T" }, 
       ModelCorrespondence { "CIM_iSCSISession.InitialR2T" }]
   boolean InitialR2TPreference = true;

      [Write, Description (
          "This property indicates ImmediateData preference for this "
          "node True = YES (but will accept NO), False = NO."), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeImmediateData" }, 
       ModelCorrespondence { "CIM_iSCSISession.ImmediateData" }]
   boolean ImmediateDataPreference = true;

      [Write, Description (
          "Maximum number of outstanding R2Ts allowed per ISCSI task."), 
       MinValue ( 1 ), MaxValue ( 65535 ), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeMaxOutstandingR2T" 
          }, 
       ModelCorrespondence { "CIM_iSCSISession.MaxOutstandingR2T" }]
   uint32 MaxOutstandingR2T = 1;

      [Write, Description (
          "The maximum length (bytes) supported for unsolicited data "
          "to/from this node."), 
       Units ( "Bytes" ), MinValue ( 512 ), MaxValue ( 16777215 ), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeFirstBurstLength" 
          }, 
       ModelCorrespondence { 
          "CIM_iSCSISession.MaxUnsolicitedFirstDataBurstLength" }]
   uint32 MaxUnsolicitedFirstDataBurstLength = 65536;

      [Write, Description (
          "The maximum number of bytes which can be sent within a "
          "single sequence of Data-In or Data-Out PDUs."), 
       Units ( "Bytes" ), MinValue ( 512 ), MaxValue ( 16777215 ), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeMaxBurstLength" }, 
       ModelCorrespondence { "CIM_iSCSISession.MaxDataBurstLength" }]
   uint32 MaxDataBurstLength = 262144;

      [Write, Description (
          "The DataSequenceInOrder preference of this node. False "
          "(=No) indicates that iSCSI data PDU sequences MAY be "
          "transferred in any order. True (=Yes) indicates that data "
          "PDU sequences MUST be transferred using continuously "
          "increasing offsets, except during error recovery."), 
       MappingStrings { 
          "MIB.IETF|iSCSI-MIB.iscsiNodeDataSequenceInOrder" }, 
       ModelCorrespondence { "CIM_iSCSISession.DataSequenceInOrder" }]
   boolean DataSequenceInOrderPreference = true;

      [Write, Description (
          "The DataPDUInOrder preference of this node. False (=No) "
          "indicates that iSCSI data PDUs within sequences MAY be in "
          "any order. True (=Yes) indicates that data PDUs within "
          "sequences MUST be at continuously increasing addresses, "
          "with no gaps or overlay between PDUs."), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeDataPDUInOrder" }, 
       ModelCorrespondence { "CIM_iSCSISession.DataPDUInOrder" }]
   boolean DataPDUInOrderPreference = true;

      [Write, Description (
          "The DefaultTime2Wait preference of this node. This is the "
          "minimum time, in seconds, to wait before attempting an "
          "explicit/implicit logout or active iSCSI task reassignment "
          "after an unexpected connection termination or a connection "
          "reset."), 
       Units ( "Seconds" ), MinValue ( 0 ), MaxValue ( 3600 ), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiNodeDefaultTime2Wait" 
          }, 
       ModelCorrespondence { "CIM_iSCSISession.DefaultTimeToWait" }]
   uint32 DefaultTimeToWaitPreference = 2;

      [Write, Description (
          "The DefaultTime2Retain preference of this node. This is the "
          "maximum time, in seconds after an initial wait (Time2Wait), "
          "before which an active iSCSI task reassignment is still "
          "possible after an unexpected connection termination or a "
          "connection reset."), 
       Units ( "Seconds" ), MinValue ( 0 ), MaxValue ( 3600 ), 
       MappingStrings { 
          "MIB.IETF|iSCSI-MIB.iscsiNodeDefaultTime2Retain" }, 
       ModelCorrespondence { "CIM_iSCSISession.DefaultTimeToRetain" }]
   uint32 DefaultTimeToRetainPreference = 20;

      [Write, Description (
          "The ErrorRecoveryLevel preference of this node. Currently, "
          "only 0-2 are valid. This is designed to accommodate future "
          "error recover levels. \n"
          "Higher error recovery levels imply support in addition to "
          "support for the lower error level functions. In other "
          "words, error level 2 implies support for levels 0-1, since "
          "those functions are subsets of error level 2."), 
       MinValue ( 0 ), MaxValue ( 255 ), 
       MappingStrings { 
          "MIB.IETF|iSCSI-MIB.iscsiNodeErrorRecoveryLevel" }, 
       ModelCorrespondence { "CIM_iSCSISession.ErrorRecoveryLevel" }]
   uint32 ErrorRecoveryLevelPreference = 0;
};