cim_switchportpair.mof

来自「Pegasus is an open-source implementation」· MOF 代码 · 共 40 行

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SwitchPortPair
// ==================================================================
   [Association, UMLPackagePath ( "CIM::Network::SwitchingBridging" ),
    Version ( "2.7.0" ), Description (
       "This association represents information regarding port "
       "pairings that is used by the SourceRoutingService of a switch.")]
class CIM_SwitchPortPair : CIM_SAPSAPDependency {

      [Override ( "Antecedent" ), Description (
          "The lower numbered port.")]
   CIM_SwitchPort REF Antecedent;

      [Override ( "Dependent" ), Description (
          "The higher numbered port.")]
   CIM_SwitchPort REF Dependent;

      [Description (
          "A bridge number that uniquely identifies the path provided "
          "by this source routing bridge between the segments "
          "connected to high and low ports. The purpose of bridge "
          "number is to disambiguate between multiple paths connecting "
          "the same two LANs."), 
       MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dPortPairBridgeNum" }]
   uint16 BridgeNum;

      [Description (
          "The state of the pairing. Writing 'invalid(3)' to this "
          "property removes the association instance."), 
       ValueMap { "1", "2", "3" }, 
       Values { "Enabled", "Disabled", "Invalid" }, 
       MappingStrings { 
          "MIB.IETF|SOURCE-ROUTING-MIB.dot1dPortPairBridgeState" }]
   uint16 BridgeState;
};