cim_securityassociationendpoint.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_SecurityAssociationEndpoint
// ==================================================================
   [UMLPackagePath ( "CIM::Network::IPsec" ), Version ( "2.8.0" ), 
    Description (
       "SecurityAssociationEndpoint (SAEndpoint) represents the "
       "endpoint of a secure connection. This is typically an IP "
       "connection, although the model allows more flexibility than "
       "just IP. The SecurityAssociationEndpoint is tied to an "
       "IPProtocolEndpoint (or possibly other endpoint) using the "
       "LogicalIdentity association. Note that an endpoint is defined "
       "at both ends of the connection.")]
class CIM_SecurityAssociationEndpoint : CIM_ProtocolEndpoint {

      [Override ( "InstallDate" ), Description (
          "InstallDate records when the SA (and its endpoint) was "
          "created.")]
   datetime InstallDate;

      [Description (
          "LifetimeSeconds specifies the maximum time that the SA will "
          "be considered valid after it has been created. A value of "
          "zero indicates that the default of 8 hours be used. A "
          "non-zero value indicates the seconds lifetime."), 
       Units ( "Seconds" )]
   uint64 LifetimeSeconds = 0;

      [Write, Description (
          "RefreshThresholdSecondsPercentage is the lifetime "
          "percentage after which a new SA should be acquired, before "
          "the existing SA expires. A random period may be added to a "
          "calculated threshold to reduce network thrashing."), 
       Units ( "Percent" ), MinValue ( 0 ), MaxValue ( 100 )]
   uint8 RefreshThresholdSecondsPercentage;

      [Description (
          "IdleDurationSeconds specifies how long the SA can be idle "
          "before it is deleted. The default value, 0, indicates that "
          "there is no idle timeout period."), 
       Units ( "Seconds" )]
   uint64 IdleDurationSeconds = 0;

      [Description (
          "LifetimeKilobytes specifies the maximum number of kilobytes "
          "of data traffic to be protected by the SA. A value of zero "
          "(the default) indicates that there should be no maximum "
          "kilobyte lifetime. A non-zero value specifies the desired "
          "kilobyte lifetime. The SA is deleted when the "
          "LifetimeKilobyte value is exceeded."), 
       Units ( "KiloBytes" )]
   uint64 LifetimeKilobytes = 0;

      [Write, Description (
          "RefreshThresholdKbytesPercentage is the lifetime percentage "
          "of kilobytes processed, at which a new SA should be "
          "acquired. A random value may be added to the calculated "
          "threshold to reduce network thrashing."), 
       Units ( "Percent" ), MinValue ( 0 ), MaxValue ( 100 )]
   uint8 RefreshThresholdKbytesPercentage;

      [Write, Description (
          "PacketLoggingActive causes a log to be kept of traffic "
          "processed by the SAEndpoint.")]
   boolean PacketLoggingActive;
};