cim_ospfprotocolendpointbase.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="DMTFCR01484.000" type ="change"> Correct ValueMaps for
// ProtocolIfType</

// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_OSPFProtocolEndpointBase
// ==================================================================
   [UMLPackagePath ( "CIM::Network::ProtocolEndpoints" ),
       Version ( "2.8.0" ), Description (
       "Base class for OSPF protocol endpoints, defining several "
       "general properties.")]
class CIM_OSPFProtocolEndpointBase : CIM_ProtocolEndpoint {

      [Override ( "EnabledState" ), Description (
          "The operational status of the interface, see "
          "ospfIfAdminStat in RFC 1850. This is an integer enumeration "
          "whose complete definition is found in the "
          "EnabledLogicalElement class."), 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfAdminStat" }]
   uint16 EnabledState;

      [Description (
          "Estimated delay, in seconds that it takes to transmit a "
          "Link State Update Packet over this interface, see C.3 in "
          "RFC 2328."), 
       Units ( "Seconds" ), 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfTransitDelay" }]
   uint16 TransitDelay;

      [Description (
          "The number of seconds between LSA (Link State "
          "Advertisement) retransmissions, see C.3 in RFC 2328."), 
       Units ( "Seconds" ), 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfRetransInterval" }]
   uint16 RetransmitInterval;

      [Required, Description (
          "Identifies the authentication procedure to be used on the "
          "attached network, see C.3 in RFC 2328."), 
       ValueMap { "1", "2", "3", "4" }, 
       Values { "Other", "Null authentication", "Simple password",
          "Cryptographic authentication" }, 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfAuthType" }]
   uint16 AuthType;

      [Description (
          "Specifies the authentication procedure if the value, "
          "\"Other\" (1) is set for AuthType."), 
       ModelCorrespondence { "CIM_OSPFProtocolEndpoint.AuthType" }]
   string OtherAuthType;

      [Description (
          "This key is used during the authentication procedure to "
          "verify OSPF protocol packets, see C.3 RFC 2328. It is used "
          "in the \"Simple password\" and in the \"Cryptographic "
          "authentication\" case too."), 
       MappingStrings { "MIB.IETF|OSPF-MIB.ospfIfAuthKey" }]
   string AuthKey;


      [Override ( "ProtocolIFType" ), Description (
          "ProtocolIFType's enumeration is limited to OSPF and "
          "reserved values for this subclass of ProtocolEndpoint."), 
       ValueMap { "1", "225..4095", "4109", "4301..32767", "32768.." }, 
       Values { "Other", "IANA Reserved", "OSPF", "DMTF Reserved",
          "Vendor Reserved" }]
   uint16 ProtocolIFType = 4109;

};