cim_iscsiconnection.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="DMTFCR11614.001" type ="add">
// Add properties AuthenticationMethodUsed and
// MutualAuthentication.</change>
// <change cr="NetworksCR00020" type ="chanage">
// Correct property types on MaxSegmentLengthProperties.</change>
// <change cr="NetworksCR00062.000" type ="change">
// Move class from Experimental to Final in v2.11.</change>



// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_iSCSIConnection
// ==================================================================
   [UMLPackagePath ( "CIM::Network::iSCSI" ), Version ( "2.11.0" ), 
    Description (
       "This class contains the attributes of and negotiated values "
       "for, an iSCSI Connection which is modeled as a subclass of "
       "NetworkPipe. The original settings that are a starting point "
       "for negotiation are found in the class "
       "iSCSIConnectionSettings.")]
class CIM_iSCSIConnection : CIM_NetworkPipe {

      [Description (
          "The iSCSI Connection ID for this connection."), 
       MinValue ( 1 ), MaxValue ( 65535 ), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiCxnCid" }]
   uint32 ConnectionID;

      [Description (
          "The maximum data payload size supported for command or data "
          "PDUs able to be received on this connection."), 
       Units ( "Bytes" ), MinValue ( 512 ), MaxValue ( 16777215 ), 
       MappingStrings { 
          "MIB.IETF|iSCSI-MIB.iscsiCxnMaxRecvDataSegLength" }, 
       ModelCorrespondence { 
          "CIM_iSCSIConnectionSettings.MaxReceiveDataSegmentLength" }]
   uint32 MaxReceiveDataSegmentLength;

      [Description (
          "The maximum data payload size supported for command or data "
          "PDUs to be sent on this connection."), 
       Units ( "Bytes" ), MinValue ( 512 ), MaxValue ( 16777215 ), 
       MappingStrings { 
          "MIB.IETF|iSCSI-MIB.iscsiCxnMaxXmitDataSegLength" }]
   uint32 MaxTransmitDataSegmentLength;

      [Description (
          "This property identifies the iSCSI header digest scheme in "
          "use within this connection."), 
       ValueMap { "1", "2", "3" }, 
       Values { "Other", "No Digest", "CRC32C" }, 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiCxnHeaderIntegrity" }, 
       ModelCorrespondence { 
          "CIM_iSCSIConnectionSettings.PrimaryHeaderDigestMethod",
          "CIM_iSCSIConnectionSettings.SecondaryHeaderDigestMethod",
          "CIM_iSCSIConnection.OtherHeaderDigestMethod" }]
   uint16 HeaderDigestMethod;

      [Description (
          "A string describing the Header Digest scheme in use when "
          "HeaderDigestMethod is equal to the value 1, \"Other\"."), 
       ModelCorrespondence { 
          "CIM_iSCSIConnectionSettings.OtherPrimaryHeaderDigestMethod",
          "CIM_iSCSIConnectionSettings.OtherSecondaryHeaderDigestMethod",
          "CIM_iSCSIConnection.HeaderDigestMethod" }]
   string OtherHeaderDigestMethod;

      [Description (
          "This property identifies the iSCSI data digest scheme in "
          "use within this connection."), 
       ValueMap { "1", "2", "3" }, 
       Values { "Other", "No Digest", "CRC32C" }, 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiCxnDataIntegrity" }, 
       ModelCorrespondence { 
          "CIM_iSCSIConnectionSettings.PrimaryHeaderDigestMethod",
          "CIM_iSCSIConnectionSettings.SecondaryHeaderDigestMethod",
          "CIM_iSCSIConnection.OtherDataDigestMethod" }]
   uint16 DataDigestMethod;

      [Description (
          "A string describing the Data Digest scheme in use when "
          "DataDigestMethod is equal to the value 1, \"Other\"."), 
       ModelCorrespondence { 
          "CIM_iSCSIConnectionSettings.OtherPrimaryDataDigestMethod",
          "CIM_iSCSIConnectionSettings.OtherSecondaryDataDigestMethod",
          "CIM_iSCSIConnection.DataDigestMethod" }]
   string OtherDataDigestMethod;

      [Description (
          "This property indicates whether or not this connection is "
          "receiving markers in in its incoming data stream."), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiCxnRecvMarker" }, 
       ModelCorrespondence { 
          "CIM_iSCSIConnectionSettings.RequestingMarkersOnReceive" }]
   boolean ReceivingMarkers;

      [Description (
          "This property indicates whether or not this connection is "
          "inserting markers in in its outgoing data stream."), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiCxnSendMarker" }]
   boolean SendingMarkers;

      [Description (
          "Active version number of the iSCSI specification negotiated "
          "on this connection."), 
       MinValue ( 0 ), MaxValue ( 255 ), 
       MappingStrings { "MIB.IETF|iSCSI-MIB.iscsiCxnVersionActive" }, 
       ModelCorrespondence { 
          "CIM_iSCSICapabilities.MinimumSpecificationVersionSupported",
          "CIM_iSCSICapabilities.MaximumSpecificationVersionSupported" 
          }]
   boolean ActiveiSCSIVersion;

      [Description (
          "The authentication method being used on this connection, as "
          "communicated during the login phase."), 
       ValueMap { "2", "3", "4", "5" }, 
       Values { "No Authentication", "SRP", "CHAP", "Kerberos" }, 
       MappingStrings { "MIB.IETF|IPS-AUTH-MIB.ipsAuthCredAuthMethod" }, 
       ModelCorrespondence { 
          "CIM_iSCSIConnectionSettings.PrimaryAuthenticationMethod",
          "CIM_iSCSIConnectionSettings.SecondaryAuthenticationMethod",
          "CIM_iSCSICapabilities.AuthenticationMethodsSupported" }]
   uint16 AuthenticationMethodUsed;

      [Description (
          "This property when true, indicates that the Target was "
          "required to authenticate itself to the Initiator, in "
          "addition to the Initiator authenticating itself to the "
          "Target. When false, and AuthenticationMethod is other than "
          "'No Authentication', only the Initatior authenticated "
          "itself to the Target. \n"
          "When AuthenticationMethodUsed is 'No Authentication', this "
          "property must be false.")]
   boolean MutualAuthentication;

};