cim_meterservice.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_MeterService
// ==================================================================
   [UMLPackagePath ( "CIM::Network::QoS" ), Version ( "2.7.0" ), 
    Description (
       "This class represents the metering of network traffic. "
       "Metering is the function of monitoring the arrival times of "
       "packets of a traffic stream and determining the level of "
       "conformance of each packet with respect to a pre- established "
       "traffic profile. A meter has the ability to invoke different "
       "ConditioningServices for conforming and non-conforming "
       "traffic. Traffic leaving a meter may be further conditioned "
       "(e.g., dropped or queued) by routing the packet to another "
       "conditioning element. \n"
       "\n"
       "This class is modeled as a ConditioningService so that it can "
       "be aggregated into a QoSService (using the "
       "QoSConditioningSubService association), to indicate that its "
       "functionality underlies that QoS service. MeterService also "
       "participates in a subclass of the NextService association, to "
       "identify the subsequent ConditioningServices for conforming "
       "and non-conforming traffic.")]
class CIM_MeterService : CIM_ConditioningService {

      [Description (
          "This property is an enumerated 16-bit unsigned integer that "
          "is used to specify the particular type of meter. Defined "
          "values of the enumeration are: \n"
          "\n"
          "1: Other \n"
          "2: Average Rate Meter \n"
          "3: Exponentially Weighted Moving Average Meter \n"
          "4: Token Bucket Meter \n"
          "\n"
          "Note: The MeterType property and the MeterService "
          "subclasses provide similar information. This property is "
          "defined for query purposes and for future expansion. It is "
          "assumed that not all MeterServices will require a subclass "
          "to define them. Therefore, MeterService will be "
          "instantiated directly and the Type property is needed."), 
       ValueMap { "1", "2", "3", "4" }, 
       Values { "Other", "Average Rate Meter",
          "Exponentially Weighted Moving Average Meter",
          "Token Bucket Meter" }, 
       ModelCorrespondence { "CIM_MeterService.OtherMeterType" }]
   uint16 MeterType;

      [Description (
          "This property is a string used in conjunction with the "
          "MeterType property. When the value of MeterType is 1 (i.e., "
          "\"Other\"), then the name of the conformance level for this "
          "meter is defined in this property."), 
       ModelCorrespondence { "CIM_MeterService.MeterType" }]
   string OtherMeterType;

      [Description (
          "An unsigned integer indicating the number of conformance "
          "levels supported by the Meter. For example, when only "
          "'in-profile' or 'out of profile' metering is supported. "
          "ConformanceLevels is set to 2.")]
   uint16 ConformanceLevels;
};