cim_nextserviceaftermeter.mof

来自「Pegasus is an open-source implementation」· MOF 代码 · 共 46 行

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_NextServiceAfterMeter
// ==================================================================
   [Association, UMLPackagePath ( "CIM::Network::QoS" ),
       Version ( "2.7.0" ), Description (
       "This association describes a predecessor-successor "
       "relationship between a MeterService and one or more "
       "ConditioningService objects that process traffic from the "
       "meter. For example, for devices that implement preamble "
       "marking, the FollowingService reference (after the meter) is a "
       "PreambleMarkerService - to record the results of the metering "
       "in the preamble. \n"
       "\n"
       "It might be expected that the NextServiceAfterMeter "
       "association would subclass from NextService. However, meters "
       "are 1:n fan-out elements, and require a mechanism to "
       "distinguish between the different results/outputs of the "
       "meter. Therefore, this association defines a new key property, "
       "MeterResult, which is used to record the result and identify "
       "the output through which this traffic left the meter.")]
class CIM_NextServiceAfterMeter {

      [Key, Description (
          "The preceding MeterService, 'earlier' in the processing "
          "sequence for a packet.")]
   CIM_MeterService REF PrecedingService;

      [Key, Description (
          "The 'next' or following ConditioningService.")]
   CIM_ConditioningService REF FollowingService;

      [Key, Description (
          "Information on the result of the metering. Traffic is "
          "distinguished as being conforming, non-conforming, or "
          "partially conforming. More complicated metering can be "
          "built either by extending the enumeration or by cascading "
          "meters."), 
       ValueMap { "0", "1", "2", "3" }, 
       Values { "Unknown", "Conforming", "Partially Conforming",
          "Non-Conforming" }]
   uint16 MeterResult;
};