cim_card.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_Card
// ==================================================================
   [UMLPackagePath ( "CIM::Physical::Package" ), Version ( "2.8.0" ), 
    Description (
       "The Card class represents a type of physical container that "
       "can be plugged into another Card or HostingBoard, or is itself "
       "a HostingBoard/Motherboard in a Chassis. The CIM_Card class "
       "includes any package capable of carrying signals and providing "
       "a mounting point for PhysicalComponents, such as Chips, or "
       "other PhysicalPackages, such as other Cards.")]
class CIM_Card : CIM_PhysicalPackage {

      [Description (
          "Boolean indicating that this Card is a Motherboard or, more "
          "generically, a baseboard in a Chassis.")]
   boolean HostingBoard;

      [Description (
          "SlotLayout is a free-form string that describes the slot "
          "positioning, typical usage, restrictions, individual slot "
          "spacings or any other pertinent information for the slots "
          "on a Card.")]
   string SlotLayout;

      [Description (
          "Boolean indicating that at least one daughterboard or "
          "auxiliary Card is required in order to function properly.")]
   boolean RequiresDaughterBoard;

      [Description (
          "Boolean indicating that this Card is physically unique from "
          "other Cards of the same type and therefore requires a "
          "special Slot. For example, a double-wide Card requires two "
          "Slots. Another example is where a certain Card may be used "
          "for the same general function as other Cards but requires a "
          "special Slot (e.g., extra long), whereas the other Cards "
          "can be placed in any available Slot. If set to TRUE, then "
          "the corresponding property, RequirementsDescription, should "
          "specify the nature of the uniqueness or purpose of the "
          "Card."), 
       ModelCorrespondence { "CIM_Card.RequirementsDescription" }]
   boolean SpecialRequirements;

      [Description (
          "A free-form string describing the way(s) in which this Card "
          "is physically unique from other Cards. This property only "
          "has meaning when the corresponding boolean property, "
          "SpecialRequirements, is set to TRUE."), 
       ModelCorrespondence { "CIM_Card.SpecialRequirements" }]
   string RequirementsDescription;

      [Description (
          "Operating voltages required by the Card."), 
       Units ( "MilliVolts" )]
   sint16 OperatingVoltages[];

      [Description (
          "This method manipulates the power to a PhysicalConnector on "
          "a Card. It is intended to be used by a Card (especially by "
          "a motherboard - i.e., HostingBoard=TRUE) to turn the power "
          "on and off for a specific PhysicalConnector located on it. "
          "For example, in a personal computer, a system slot does not "
          "know how to turn itself on and off. However, the "
          "motherboard hosting this slot may have that capability. "
          "This is important in order to support hot swapping of an "
          "adapter card in a system slot. The method should return 0 "
          "if successful, 1 if the request is not supported, and some "
          "other value if any other error occurred. In a subclass, the "
          "set of possible return codes could be specified, using a "
          "ValueMap qualifier on the method. The strings to which the "
          "ValueMap contents are 'translated' may also be specified in "
          "the subclass as a Values array qualifier.")]
   uint32 ConnectorPower( 
         [IN, Description (
             "The connector to change the power setting for.")]
      CIM_PhysicalConnector REF Connector, 
         [IN, Description (
             "If TRUE, turn power on for the connector. If FALSE, turn "
             "power off.")]
      boolean PoweredOn); 
};