cim_physicalmedia.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_PhysicalMedia
// ==================================================================
   [UMLPackagePath ( "CIM::Physical::PhysicalMedia" ),
       Version ( "2.6.0" ), Description (
       "The PhysicalMedia class represents any type of documentation "
       "or storage medium, such as tapes, CDROMs, etc. This class is "
       "typically used to locate and manage Removable Media (versus "
       "Media sealed with the MediaAccessDevice, as a single Package, "
       "as is the case with hard disks). However, 'sealed' Media can "
       "also be modeled using this class, where the Media would then "
       "be associated with the PhysicalPackage using the "
       "PackagedComponent relationship.")]
class CIM_PhysicalMedia : CIM_PhysicalComponent {

      [Description (
          "The number of bytes that can be read from or written to a "
          "Media. This property is not applicable to \"Hard Copy\" "
          "(documentation) or cleaner Media. Data compression should "
          "not be assumed, as it would increase the value in this "
          "property. For tapes, it should be assumed that no filemarks "
          "or blank space areas are recorded on the Media."), 
       Units ( "Bytes" )]
   uint64 Capacity;

      [Description (
          "Specifies the type of the PhysicalMedia, as an enumerated "
          "integer. The MediaDescription property is used to provide "
          "more explicit definition of the Media type, whether it is "
          "pre-formatted, compatability features, etc."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12", "13", "14", "15", "16", "17", "18", "19",
          "20", "21", "22", "23", "24", "25", "26", "27", "28", "29",
          "30", "31", "32", "33", "34", "35", "36", "37", "38", "39",
          "40", "41", "42", "43", "44", "45", "46", "47", "48", "49",
          "50", "51", "52", "53", "54", "55", "56", "57", "58", "59",
          "60", "61", "62", "63", "64", "65", "66" }, 
       Values { "Unknown", "Other", "Tape Cartridge", "QIC Cartridge",
          "AIT Cartridge", "DTF Cartridge", "DAT Cartridge",
          "8mm Tape Cartridge", "19mm Tape Cartridge", "DLT Cartridge", 
          // 10                 
          "Half-Inch Magnetic Tape Cartridge", "Cartridge Disk",
          "JAZ Disk", "ZIP Disk", "SyQuest Disk",
          "Winchester Removable Disk", "CD-ROM", "CD-ROM/XA", "CD-I",
          "CD Recordable", 
          // 20                
          "WORM", "Magneto-Optical", "DVD", "DVD-RW+", "DVD-RAM",
          "DVD-ROM", "DVD-Video", "Divx", "Floppy/Diskette",
          "Hard Disk", 
          // 30                 
          "Memory Card", "Hard Copy", "Clik Disk", "CD-RW", "CD-DA",
          "CD+", "DVD Recordable", "DVD-RW", "DVD-Audio", "DVD-5", 
          // 40                
          "DVD-9", "DVD-10", "DVD-18", "Magneto-Optical Rewriteable",
          "Magneto-Optical Write Once",
          "Magneto-Optical Rewriteable (LIMDOW)",
          "Phase Change Write Once", "Phase Change Rewriteable",
          "Phase Change Dual Rewriteable", "Ablative Write Once", 
          // 50                
          "Near Field Recording", "MiniQic", "Travan",
          "8mm Metal Particle", "8mm Advanced Metal Evaporate", "NCTP",
          "LTO Ultrium", "LTO Accelis", "9 Track Tape",
          "18 Track Tape", 
          // 60                 
          "36 Track Tape", "Magstar 3590", "Magstar MP", "D2 Tape",
          "Tape - DST Small", "Tape - DST Medium", "Tape - DST Large" }, 
       ModelCorrespondence { "CIM_PhysicalMedia.MediaDescription" }]
   uint16 MediaType;

      [Description (
          "Additional detail related to the MediaType enumeration. For "
          "example, if value 3 (\"QIC Cartridge\") is specified, this "
          "property could indicate whether the tape is wide or 1/4 "
          "inch, whether it is pre-formatted, whether it is Travan "
          "compatible, etc."), 
       ModelCorrespondence { "CIM_PhysicalMedia.MediaType" }]
   string MediaDescription;

      [Description (
          "Boolean specifying whether the Media is currently write "
          "protected by some kind of physical mechanism, such as a "
          "protect tab on a floppy diskette.")]
   boolean WriteProtectOn;

      [Description (
          "Boolean indicating that the PhysicalMedia is used for "
          "cleaning purposes and not data storage.")]
   boolean CleanerMedia;

      [Description (
          "Size of the Media in inches. For example, '3.5' would be "
          "entered for a 3.5 inch disk, or '12' would be entered for a "
          "12 inch optical disk. On the other hand, '0.5' would be "
          "defined for a 1/2 inch tape."), 
       Units ( "Inches" )]
   real32 MediaSize;

      [Description (
          "For removable Media, the maximum number of times that the "
          "Media can be mounted before it should be retired. For "
          "cleaner Media, this is the maximum number of Drive cleans "
          "that can be performed. For nonremovable Media, such as hard "
          "disks, this property is not applicable and should be set to "
          "0.")]
   uint64 MaxMounts;

      [Description (
          "For removable or cleaner Media, the number of times that "
          "the Media has been mounted for data transfer or to clean a "
          "Drive. For nonremovable Media, such as hard disks, this "
          "property is not applicable and should be set to 0."), 
       Counter, 
       ModelCorrespondence { "CIM_PhysicalMedia.MaxMounts" }]
   uint64 MountCount;

      [Description (
          "Boolean indicating that the Media has two recording sides "
          "(TRUE) or only a single side (FALSE). Examples of dual "
          "sided Media include DVD-ROM and some optical disks. "
          "Examples of single sided Media are tapes and CD-ROM.")]
   boolean DualSided;

      [Description (
          "One or more strings on 'labels' on the PhysicalMedia. The "
          "format of the labels and their state (readable, unreadable, "
          "upside-down) are indicated in the LabelFormats and "
          "LabelStates array properties."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_PhysicalMedia.LabelStates",
          "CIM_PhysicalMedia.LabelFormats" }]
   string PhysicalLabels[];

      [Description (
          "An array of enumerated integers describing the states of "
          "each of the labels on a PhysicalMedia. The Labels "
          "themselves are listed in the PhysicalLabels property. Note, "
          "each entry of this array is related to the entry in "
          "PhysicalLabels that is located at the same index."), 
       ValueMap { "0", "1", "2" }, 
       Values { "OK/Readable", "Unreadable", "Upside Down" },
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_PhysicalMedia.PhysicalLabels" }]
   uint16 LabelStates[];

      [Description (
          "An array of enumerated integers describing the formats of "
          "each of the labels on a PhysicalMedia. The Labels "
          "themselves are listed in the PhysicalLabels property. Note, "
          "each entry of this array is related to the entry in "
          "PhysicalLabels that is located at the same index."), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Barcode", "Radio Frequency Identification",
          "OCR (Optical Character Recognition)",
          "MICR (Magnetic Ink Character Recognition)",
          "7 Character Barcode", "9 Character Barcode" },
          ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_PhysicalMedia.PhysicalLabels" }]
   uint16 LabelFormats[];

      [Description (
          "For removable or cleaner Media, the date and time that the "
          "Media was last mounted. For nonremovable Media, such as "
          "hard disks, this property has no meaning and is not "
          "applicable.")]
   datetime TimeOfLastMount;

      [Description (
          "For removable or cleaner Media, the total time (in seconds) "
          "that the Media has been mounted for data transfer or to "
          "clean a Drive. For nonremovable Media, such as hard disks, "
          "this property is not applicable and should be set to 0."), 
       Units ( "Seconds" )]
   uint64 TotalMountTime;
};