cim_physicalpackage.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_PhysicalPackage
// ==================================================================
   [UMLPackagePath ( "CIM::Physical::Package" ), Version ( "2.8.0" ), 
    Description (
       "The PhysicalPackage class represents PhysicalElements that "
       "contain or host other components. Examples are a Rack "
       "enclosure or an adapter Card.")]
class CIM_PhysicalPackage : CIM_PhysicalElement {

      [Description (
          "The RemovalCapabilites property is used to describe the "
          "conditions under which a PhysicalPackage can be removed. "
          "Since all PhysicalPackages are not removable, this property "
          "defaults to 2, 'Not Applicable'."), 
       ValueMap { "0", "2", "3", "4" }, 
       Values { "Unknown", "Not Applicable", "Removable when off",
          "Removable when on or off" }]
   uint16 RemovalConditions = 2;

      [Deprecated { "CIM_PhysicalPackage.RemovalConditions" }, 
       Description (
          "The use of this property is being deprecated. Instead "
          "RemovalConditions should be used. The RemovalConditions "
          "property addresses whether a PhysicalPackage is removable "
          "with or without power being applied. \n"
          "A PhysicalPackage is Removable if it is designed to be "
          "taken in and out of the physical container in which it is "
          "normally found, without impairing the function of the "
          "overall packaging. A Package can still be Removable if "
          "power must be 'off' in order to perform the removal. If "
          "power can be 'on' and the Package removed, then the Element "
          "is both Removable and HotSwappable. For example, an extra "
          "battery in a laptop is Removable, as is a disk drive "
          "Package inserted using SCA connectors. However, the latter "
          "is also HotSwappable. A laptop's display is not Removable, "
          "nor is a non-redundant power supply. Removing these "
          "components would impact the function of the overall "
          "packaging or is impossible due to the tight integration of "
          "the Package.")]
   boolean Removable;

      [Deprecated { "No Value" }, Description (
          "The use of this property is being deprecated because it is "
          "redundant with the FRU class and its associations. A "
          "PhysicalPackage is Replaceable if it is possible to replace "
          "(FRU or upgrade) the Element with a physically different "
          "one. For example, some ComputerSystems allow the main "
          "Processor chip to be upgraded to one of a higher clock "
          "rating. In this case, the Processor is said to be "
          "Replaceable. Another example is a power supply Package "
          "mounted on sliding rails. All Removable packages are "
          "inherently Replaceable.")]
   boolean Replaceable;

      [Deprecated { "CIM_PhysicalPackage.RemovalConditions" }, 
       Description (
          "The use of this property is being deprecated. Instead "
          "RemovalConditions should be used. The RemovalConditions "
          "property addresses whether a PhysicalPackage is removable "
          "with or without power being applied. \n"
          "\n"
          "A PhysicalPackage is HotSwappable if it is possible to "
          "replace the Element with a physically different but "
          "equivalent one while the containing Package has power "
          "applied to it (ie, is 'on'). For example, a disk drive "
          "Package inserted using SCA connectors is both Removable and "
          "HotSwappable. All HotSwappable packages are inherently "
          "Removable and Replaceable.")]
   boolean HotSwappable;

      [Description (
          "The height of the PhysicalPackage in inches."), 
       Units ( "Inches" )]
   real32 Height;

      [Description (
          "The depth of the PhysicalPackage in inches."), 
       Units ( "Inches" )]
   real32 Depth;

      [Description (
          "The width of the PhysicalPackage in inches."), 
       Units ( "Inches" )]
   real32 Width;

      [Description (
          "The weight of the PhysicalPackage in pounds."), 
       Units ( "Pounds" )]
   real32 Weight;

      [Deprecated { "No Value" }, Description (
          "This method is being deprecated. A PhysicalPackage cannot "
          "determine if it is compatible with another object. The "
          "IsCompatible method verifies whether the referenced "
          "PhysicalElement may be contained by or inserted into the "
          "PhysicalPackage. The return value should be 0 if the "
          "request was successfully executed, 1 if the request is not "
          "supported and some other value if an error occurred. In a "
          "subclass, the set of possible return codes could be "
          "specified, using a ValueMap qualifier on the method. The "
          "strings to which the ValueMap contents are 'translated' may "
          "also be specified in the subclass as a Values array "
          "qualifier.")]
   uint32 IsCompatible( 
         [IN, Description (
             "The element to check for compatibility with this one.")]
      CIM_PhysicalElement REF ElementToCheck); 
};