cfg_sunplus_hdd_player_v01.h

凌阳8202T portable DVD源代码

#define VERSION_STRING      "HDD-000"   //version: xxx-yyy, 20030422
 #define SUPPORT_UNICODE_FONT //kenny 2005/9/6
#define IC_8202D  
//---------------------
//board parts settings
//---------------------
//SDRAM settings(bus width, default is 16-bits mode)
//#define SDRAM_BUS_32BITS//portable use 16 bit//define it to use 32 bits SDRAM Bus width


//#define SDRAM_16Mb_Mode       //only use 16Mb*1 SDRAM

/*
* Define Disc detect polling time
*/
#define DETECT_TIMES    0xff
#define NO_DISC_TIMES   30

/*
*  Video seting
*/
#define ADD_PC_VGA_OUT
/*#define TV_YUV_OUT*/
#define S_VIDEO_OUT

//#define SUPPORT_Auo_2inch_Digital_panel
//#define SUPPORT_Auo_UPS053_Digital_panel //kenny add for auo 3.5" ccir656 panel
#define SUPPORT_Auo_UPS018_Digital_panel //yangli add for auo ups018
#ifdef SUPPORT_Auo_UPS018_Digital_panel
 // #define SUPPORT_AN2526
  //#define PNGPIO_CON_TFT 
#endif   
//#define SUPPORT_VX1818_TOSHIBA_PANEL
//#define DIGITAL_VIDEO_OUT //Must Mask #define SDRAM_BUS_32BITS to use 16 bits SDRAM width 
#ifdef DIGITAL_VIDEO_OUT
#define CCIR656_TYPE1       //CCIR656 Out from Pin225~233(8202A 256pin),Pin55~66(216pin)  
//#define CCIR656_TYPE2     //CCIR656 Out from Pin164~172,193(8202A 256pin) 
#endif 


#define SUBTITLE_ADD_EDGE //zxb2005-4-24 0:17add edge for subtitle
#ifdef SUBTITLE_ADD_EDGE
#define SUBTITLE_EDGE_COLOR 1//0transparency,1black,2yellow,3gray,
                            //4blue,5orange,6blue,7yellow,8green,
                            //9green_yellow,10white,11blue,12pink,
                            //13blue_green,14gray,15transparency
#endif

//#define PNGPIO_CON_TFT

/*
* ROM setting
*/
/*#define ROM_SDRAM_SHARE_BUS*/
/*#define ROM_ATA_SHARE_BUS*/

#define CHECK_PORTABLE_OPCLSW

//CD-G related
#define SUPPORT_CDG                 //define it to support CD-G


//#define TVOUT6_4DAC_ON//portable use
//#define SUNPLUS_8202P_DEMOBOARD


#ifdef TVOUT6_4DAC_ON
#define TV_USE_4_DAC
#endif

#define TV_USE_4_DAC
//#define SCART_TV                  //define it if we support SCART TV, use GPIO-37-38-39 to control
//#define ORI_SCART_TV
//#define SCART_TV_2                //define pin151---SCART_DISPLAY; pin163---SCART_SIG  wanghaoying

 
//Upgrade setting
#define UPGRADE_FILE_NAME   {"DVDROM.BIN"}



#ifndef SDRAM_16Mb_Mode
//#define SUPPORT_NESGAME
//#define DVD_AUDIO
#endif


//audio DAC settings, chose one
//6 channel audio DAC
#ifdef SPHE8202
#define WM8746I2S24               //(format:I2S24)
#else
#define WM8746                      //(format:RJ24)WM8766 is pin-2-pin compatible
#endif
 

//Audio channel connector(RCA connector)setting, Jeff 20020520
//We assign connectors to the following index, Lm(0), Rm(1), L(2), R(3), Ls(4), Rs(5), C(6), SFE(7)
//2-3-4-5-6-7 map to DAC OUT0L-OUT0R-OUT1L-OUT1R-OUT2L-OUT2R
#define DACOUTLm        0
#define DACOUTRm        1
#define DACOUT0L        2
#define DACOUT0R        3
#define DACOUT1L        4
#define DACOUT1R        5
#define DACOUT2L        6
#define DACOUT2R        7

#define DAC_INVERT      1           //dac polarity 0 (untouch) or 1 (inverted)

//#define USE_A19_AS_GPIO_MUTE

//IR setting

#define IR44                        
//#define IR200                        // for new SUNPLUS remote controller
#define IR_PLAY_RESUME
#define IR_PLAY_RESUME_PAUSE

//#define HOLD_KEY_DETECT
//#define ADJUSTING_ACTION_VALID_RIGHT_NOW
//#define NEXT_FORWARD_IN_A_KEY
//#define IR5                         //"ircode_N700.h"


#define IR_10_PLUS
//#define IR_NO_REPEAT              //disable repeat, when we keep to press one button, Jeff 20020924
//#define USE_VFD_LED_POWER         //use VFD LED to indicate power mode

//VFD setting
//#define PMP_MCU810                  //for PMP communication with MCU810 

#ifdef PMP_MCU810
   #define MCU810_PANNEL
   #undef  SUPPORT_VFD_PANEL
#else   
    #undef SUPPORT_VFD
#endif
 
 
///OSD language related settings(don't change the sequence)
#define USE_ENGLISH_OSD             //LCD_EN
//#define USE_SCHINESE_OSD            //LCD_ZH
//#define USE_TCHINESE_OSD            //LCD_ZH
#define USE_GERMAN_OSD              //LCD_DE
#define USE_SPANISH_OSD             //LCD_ES
#define USE_FRENCH_OSD              //LCD_FR
#define USE_PORTUGUESE_OSD          //LCD_PT
//#define USE_LATIN_OSD               //LCD_LA
//#define USE_ITALIAN_OSD             //LCD_IT
//#define USE_JAPANESE_OSD            //LCD_JA
//#define USE_RUSSIAN_OSD             //LCD_RU
//#define USE_ROMANIAN_OSD             //LCD_RO
//#define USE_TURKISH_OSD             //LCD_TR
//#define USE_DUTCH_OSD               //LCD_NL
//#define USE_SWEDISH_OSD             //LCD_SV
//#define USE_CZECH_OSD               //LCD_CS


#define DEFAULT_OSD_LANG            0
#ifdef SDRAM_16Mb_Mode
#define N_OSD_LANGS                 2
#define OSD_LAGN_SETUP_STRING       LCD_EN,LCD_PT,0,0,0,0,0,0
#define OSD_LANG_SETUP_MAP          {0,     1,     0,     0,     0,      0, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#else
#define N_OSD_LANGS                 6//8//3
#define OSD_LAGN_SETUP_STRING       LCD_EN,LCD_DE,LCD_ES,LCD_FR,LCD_PT,0,0,0
#define OSD_LANG_SETUP_MAP          {0,     1,     2,     3,     4,      0, 0, 0} //mapping table(OSD_LAGN_SETUP_STRING --> USE_XXX_OSD)
#endif

#define OSD_TIMEOUT                 200
#define OSD_SCREEN_SAVER
#define SCRN_SAVER_WHEN_PAUSE

#define REGION_NUM                  6       //set default region:0->all rigion;1~6->REGION 1~6.

#define SUPER_PASSWORD              {IRC_5,IRC_1,IRC_6,IRC_8}   //define super password when open tray
#define DEFAULT_PASSWORD            0000                        //Jeff 20020703
#define USER_SUPER_PASSWORD         0000                       //NONO 3-6-17 14:31


#define DEFAULT_AUDIO_LANG          2   //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_AUDIO_LAGN_SETUP_STRING     LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_LA, LCD_DE

#define DEFAULT_SUBT_LANG           2   //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:off
#define OSD_SUBT_LAGN_SETUP_STRING     LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, STR_OS_OFF

#define DEFAULT_MENU_LANG       2      //2:Chn, 3:Eng, 4:Jap, 5:Frn, 6:Spa, 7:Por, 8:Ger, 9:Lat
#define OSD_MENU_LAGN_SETUP_STRING     LCD_ZH,LCD_EN,LCD_JA,LCD_FR,LCD_ES,LCD_PT, LCD_DE, LCD_LA

#define DEFAULT_TV_SYS              0       //0:NTSC, 1:PAL60, 2:PAL, 3:AUTO
//#define TV_SYS_SETUP_STRING       STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_PALM, STR_OS_PALN, STR_OS_PALNc, STR_OS_AUTO, 0
#define TV_SYS_SETUP_STRING         STR_OS_NTSC, STR_OS_PAL60, STR_OS_PAL, STR_OS_AUTO, 0, 0, 0

#ifdef TV_USE_4_DAC
#define MODE_MAX_PSCAN 0x05
#else
#define MODE_MAX_PSCAN 0x04
#endif

#if defined(TV_YUV_OUT)
   #ifdef TV_USE_4_DAC
   #define VIDEO_SETUP_STRING           STR_OS_P_SCAN_YUV,STR_OS_PC_VGA,STR_OS_YCbCr,STR_OS_TV_RGB, STR_OS_S_VIDEO, 0,0
   #define VIDEO_SET_MODE               P_SCAN,           PC_VGA,       INTERLACE,   TV_RGB,           TV_SVIDEO
   #else
   #define VIDEO_SETUP_STRING           STR_OS_P_SCAN_YUV,STR_OS_PC_VGA,STR_OS_YCbCr,STR_OS_TV_RGB, 0, 0,0
   #define VIDEO_SET_MODE               P_SCAN,           PC_VGA,       INTERLACE,   TV_RGB
   #endif
#elif defined(S_VIDEO_OUT)
   #ifdef TV_USE_4_DAC
   #define VIDEO_SETUP_STRING           STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,STR_OS_PC_VGA, STR_OS_S_VIDEO, 0,0
   #define VIDEO_SET_MODE               INTERLACE,   TV_RGB,       P_SCAN,           PC_VGA,        TV_SVIDEO
   #else
   #define VIDEO_SETUP_STRING           STR_OS_YCbCr,STR_OS_TV_RGB,STR_OS_P_SCAN_YUV,STR_OS_PC_VGA, 0, 0,0
   #define VIDEO_SET_MODE               INTERLACE,   TV_RGB,       P_SCAN,           PC_VGA
   #endif
#endif

#define SETUP_ALL_VALID             //define it to let SETUP MENU is always valid, Jeff 20021023
//#define SETUP_DONT_PAUSE                // define it to continue play when SETUP, alan 3-8-5 17:48

//#define NEW_SEARCH_OSD              //new search OSD function, using up/down to switch selection

//#define RATING_8                  //if we define it, there are 8 ratings, 1/2/3/../8, otherwise, 3 ratings, Jeff 20020723

#define TWO_CHANNEL_ONLY//portable use          //define it to output two channel audio only, mark it for 5.1 channel, Jeff 20020819


//#define NO_MIC                    //if use it,about MIC item will be gray and can't be selected.
#define NO_DTS_OUTPUT             //define it when we don't support DTS audio output
#ifdef NO_DTS_OUTPUT                
//#define FORCE_NO_DTS_OUTPUT         //define it when we don't support DTS audio output, but load DTS dsp_code.
#endif

//idle time to wake up screen saver
#define SAFE_WAIT_TIME              (3* 60 * 100)      //x second

#ifndef SDRAM_16Mb_Mode
#define SUPPORT_FILE_SYSTEM_MODE  //use MP3 menu to play all we support files(e.g. .dat .vob ...)
#define SUPPORT_PLAYBACK_ICON       // display osd playback icons
#endif

#ifdef SDRAM_16Mb_Mode
    #ifdef SUPPORT_FILE_SYSTEM_MODE
        #undef TWO_CHANNEL_ONLY
    #endif