uart_drv.h

ATMEL 90usb128 USB CDC source,include USB protocol stack.

/*H**************************************************************************
* NAME:         uart_drv.h
*----------------------------------------------------------------------------
* Copyright (c) 2006 Atmel.
*----------------------------------------------------------------------------
* RELEASE:      at90usb128-demo-cdc-1_0_3
* REVISION:     1.1.2.3
*----------------------------------------------------------------------------
* PURPOSE:
* Provide Uart driver
*****************************************************************************/

#ifndef _UART_DRV_H_
#define _UART_DRV_H_

#define MSK_UART_5BIT           0x00 /* UCSRnC register */
#define MSK_UART_6BIT           0x02
#define MSK_UART_7BIT           0x04
#define MSK_UART_8BIT           0x06
#define MSK_UART_9BIT           0x06

#define MSK_UART_RX_DONE        0x80 /* UCSRnA register */
#define MSK_UART_TX_COMPLET     0x40
#define MSK_UART_DRE            0x20

#define MSK_UART_ENABLE_IT_RX   0x80
#define MSK_UART_ENABLE_IT_TX   0x40
#define MSK_UART_ENABLE_RX      0x10 /* UCSRnB register */
#define MSK_UART_ENABLE_TX      0x08
#define MSK_UART_TX_BIT9        0x01
#define MSK_UART_RX_BIT9        0x02

#ifdef USE_UART1
    #define UCSRC   (UCSR0C)
    #define UCSRB   (UCSR0B)
    #define UCSRA   (UCSR0A)
    #define UDR     (UDR0)
    #define UBRRL   (UBRR0L)
    #define UBRRH   (UBRR0H)
    #define UBRR    (UBRR0)
#endif
#ifdef USE_UART2
    #define UCSRC    (UCSR1C)
    #define UCSRB    (UCSR1B)
    #define UCSRA    (UCSR1A)
    #define UDR      (UDR1)
    #define UBRRL    (UBRR1L)
    #define UBRRH    (UBRR1H)
    #define UBRR     (UBRR1)

#endif


#define Uart_hw_init(config)    (UCSRC=config)
/*#define Uart_set_baudrate(bdr)  ( UBRRH = (Uchar)((((Uint32)FOSC*1000L)/((Uint32)bdr*16)-1)>>8),\
                                  UBRRL = (Uchar)(((Uint32)FOSC*1000 )/((Uint32)bdr*16)-1)    )*/
#define Uart_enable()           (UCSRB|=MSK_UART_ENABLE_RX|MSK_UART_ENABLE_TX)
#define Uart_tx_ready()         (UCSRA&MSK_UART_DRE)
#define Uart_set_tx_busy()
#define Uart_send_byte(ch)      (UDR=ch)
#define Uart_rx_ready()         (UCSRA&MSK_UART_RX_DONE)
#define Uart_get_byte()         (UDR)
#define Uart_ack_rx_byte()

#define Uart_enable_it_rx()    (UCSRB|=MSK_UART_ENABLE_IT_RX)
#define Uart_enable_it_tx()    (UCSRB|=MSK_UART_ENABLE_IT_TX)
#define Uart_disable_it_rx()   (UCSRB&=~MSK_UART_ENABLE_IT_RX)

#endif