demo.plg

来自「这是一个在KEIL环境下个人编译通过并调试过的ARM的UCOS例子」· PLG 代码 · 共 324 行 · 第 1/3 页

PLG
324 行
字号
123
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(56): warning:  #951-D: return type of function "main" must be "int"
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c - 0 Error(s), 1 Warning(s).
Build target 'Target 1'
compiling led.c...
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(56): warning:  #951-D: return type of function "main" must be "int"
*** Error: Referred Memory Range 'ROM1' is undefined.
Target not created
Build target 'Target 1'
compiling led.c...
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(11): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): warning:  #550-D: variable "i" was set but never used
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(33): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(46): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(56): warning:  #951-D: return type of function "main" must be "int"
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(58): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(67): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "STATUS" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(84): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(87): error:  #20: identifier "ERROR" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(91): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(92): error:  #20: identifier "OK" is undefined
Target not created
Build target 'Target 1'
compiling led.c...
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(11): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): warning:  #550-D: variable "i" was set but never used
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(33): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(46): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(56): warning:  #951-D: return type of function "main" must be "int"
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(58): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(67): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "STATUS" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(84): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(87): error:  #20: identifier "ERROR" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(91): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(92): error:  #20: identifier "OK" is undefined
Target not created
Build target 'Target 1'
compiling led.c...
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(11): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): warning:  #550-D: variable "i" was set but never used
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(33): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(46): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(56): warning:  #951-D: return type of function "main" must be "int"
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(58): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(67): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "STATUS" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(84): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(87): error:  #20: identifier "ERROR" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(91): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(92): error:  #20: identifier "OK" is undefined
Target not created
Build target 'Target 1'
compiling led.c...
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(11): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(13): warning:  #550-D: variable "i" was set but never used
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(32): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(33): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(45): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(46): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(56): warning:  #951-D: return type of function "main" must be "int"
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(58): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(65): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(67): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "STATUS" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(82): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(84): error:  #20: identifier "UINT8" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(87): error:  #20: identifier "ERROR" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #20: identifier "UINT32" is undefined
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(90): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(91): error:  #29: expected an expression
F:\ARM\S3C4510B开发板资料\ADS1_2工程指导\本文提到的源代码下载\demo\led.c(92): error:  #20: identifier "OK" is undefined
Target not created
123

demo.plg - 源码说明

本页面展示了「这是一个在KEIL环境下个人编译通过并调试过的ARM的UCOS例子」中的 demo.plg 源码文件，采用 PLG 编程语言编写，共 324 行代码。您可以在线阅读完整代码内容，也可以返回资源详情页下载完整源码包进行本地学习和开发。

虫虫下载站收录了大量与KEIL相关的技术资源，包括源代码、技术文档、电路图等，是电子工程师和嵌入式开发者的专业学习平台。

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?