📄 222427.html

📁 CISCO 操作命令 CISCO 操作命令
💻 HTML
📖 第 1 页 / 共 2 页
字号:
上一页 12
<P>在基于CLI的交换机端口上启用或禁用Port Fast 特征: </P>
<P>switch(enable) set spantree portfast {module/port}{enable|disable} </P>
<P>19. 在基于IOS的交换机端口上启用或禁用UplinkFast 特征: </P>
<P>switch(config)# spanning-tree uplinkfast [max-update-rate pkts-per-second] </P>
<P>在基于CLI的交换机端口上启用或禁用UplinkFast 特征: </P>
<P>switch(enable) set spantree uplinkfast {enable|disable}[rate update-rate] [all-protocols off|on] </P>
<P>20. 为了将交换机配置成一个集群的命令交换机,首先要给管理接口分配一个IP地址,然后使用下列命令: switch(config)# cluster enable cluster-name </P>
<P>21. 为了从一条中继链路上删除VLAN,可使用下列命令: </P>
<P>switch(enable) clear trunk module/port vlan-range </P>
<P>22. 用show vtp domain 显示管理域的VTP参数. </P>
<P>23. 用show vtp statistics显示管理域的VTP参数. </P>
<P>24. 在Catalyst交换机上定义TrBRF的命令如下: </P>
<P>switch(enable) set vlan vlan-name [name name] type trbrf bridge bridge-num[stp {ieee|ibm}] </P>
<P>25. 在Catalyst交换机上定义TrCRF的命令如下: </P>
<P>switch (enable) set vlan vlan-num [name name] type trcrf </P>
<P>{ring hex-ring-num|decring decimal-ring-num} parent vlan-num </P>
<P>26. 在创建好TrBRF VLAN之后,就可以给它分配交换机端口.对于以太网交换,可以采用如下命令给VLAN分配端口: </P>
<P>switch(enable) set vlan vlan-num mod-num/port-num </P>
<P>27. 命令show spantree显示一个交换机端口的STP状态. </P>
<P>28. 配置一个ELAN的LES和BUS,可以使用下列命令: </P>
<P>ATM (config)# interface atm number.subint multioint </P>
<P>ATM(config-subif)# lane serber-bus ethernet elan-name </P>
<P>29. 配置LECS: </P>
<P>ATM(config)# lane database database-name </P>
<P>ATM(lane-config-databade)# name elan1-name server-atm-address les1-nsap-address </P>
<P>ATM(lane-config-databade)# name elan2-name server-atm-address les2-nsap-address </P>
<P>ATM(lane-config-databade)# name … </P>
<P>30. 创建完数据库后,必须在主接口上启动LECS.命令如下: </P>
<P>ATM(config)# interface atm number </P>
<P>ATM(config-if)# lane config database database-name </P>
<P>ATM(config-if)# lane config auto-config-atm-address </P>
<P>31. 将每个LEC配置到一个不同的ATM子接口上.命令如下: </P>
<P>ATM(config)# interface atm number.subint multipoint </P>
<P>ATM(config)# lane client ethernet vlan-num elan-num </P>
<P>32. 用show lane server 显示LES的状态. </P>
<P>33. 用show lane bus显示bus的状态. </P>
<P>34. 用show lane database显示LECS数据库可内容. </P>
<P>35. 用show lane client显示LEC的状态. </P>
<P>36. 用show module显示已安装的模块列表. </P>
<P>37. 用物理接口建立与VLAN的连接: </P>
<P>router# configure terminal </P>
<P>router(config)# interface media module/port </P>
<P>router(config-if)# description description-string </P>
<P>router(config-if)# ip address ip-addr subnet-mask </P>
<P>router(config-if)# no shutdown </P>
<P>38. 用中继链路来建立与VLAN的连接: </P>
<P>router(config)# interface module/port.subinterface </P>
<P>router(config-ig)# encapsulation[isl|dotlq] vlan-number </P>
<P>router(config-if)# ip address ip-address subnet-mask </P>
<P>39. 用LANE 来建立与VLAN的连接: </P>
<P>router(config)# interface atm module/port </P>
<P>router(config-if)# no ip address </P>
<P>router(config-if)# atm pvc 1 0 5 qsaal </P>
<P>router(config-if)# atm pvc 2 0 16 ilni </P>
<P>router(config-if)# interface atm module/port.subinterface multipoint </P>
<P>router(config-if)# ip address ip-address subnet-mask </P>
<P>router(config-if)# lane client ethernet elan-num </P>
<P>router(config-if)# interface atm module/port.subinterface multipoint </P>
<P>router(config-if)# ip address ip-address subnet-name </P>
<P>router(config-if)# lane client ethernet elan-name </P>
<P>router(config-if)# … </P>
<P>40. 为了在路由处理器上进行动态路由配置,可以用下列IOS命令来进行: </P>
<P>router(config)# ip routing </P>
<P>router(config)# router ip-routing-protocol </P>
<P>router(config-router)# network ip-network-number </P>
<P>router(config-router)# network ip-network-number </P>
<P>41. 配置默认路由: </P>
<P>switch(enable) set ip route default gateway </P>
<P>42. 为一个路由处理器分配VLANID,可在接口模式下使用下列命令: </P>
<P>router(config)# interface interface number </P>
<P>router(config-if)# mls rp vlan-id vlan-id-num </P>
<P>43. 在路由处理器启用MLSP: </P>
<P>router(config)# mls rp ip </P>
<P>44. 为了把一个外置的路由处理器接口和交换机安置在同一个VTP域中: </P>
<P>router(config)# interface interface number </P>
<P>router(config-if)# mls rp vtp-domain domain-name </P>
<P>45. 查看指定的VTP域的信息: </P>
<P>router# show mls rp vtp-domain vtp domain name </P>
<P>46. 要确定RSM或路由器上的管理接口,可以在接口模式下输入下列命令: </P>
<P>router(config-if)#mls rp management-interface </P>
<P>47. 要检验MLS-RP的配置情况： </P>
<P>router# show mls rp </P>
<P>48. 检验特定接口上的MLS配置： </P>
<P>router# show mls rp interface interface number </P>
<P>49. 为了在MLS-SE上设置流掩码而又不想在任一个路由处理器接口上设置访问列表： </P>
<P>set mls flow [destination|destination-source|full] </P>
<P>50. 为使MLS和输入访问列表可以兼容，可以在全局模式下使用下列命令： </P>
<P>router(config)# mls rp ip input-acl </P>
<P><p align=center> <a href="222427.html" tppabs="http://www.net130.com/2004/5-12/222427.html" style=color:#0000ff>1</a>  <a href="222427-2.html" tppabs="http://www.net130.com/2004/5-12/222427-2.html" style=color:#0000ff>2</a>  <a href="222427-3.html" tppabs="http://www.net130.com/2004/5-12/222427-3.html" style=color:#0000ff>3</a> </td>
          </tr>
          <tr>
            <td colspan="2" class="chinesefont105pt">
            <div align="right"></div>
          </td>
          </tr>
          <tr>
            <td colspan="2" class="chinesefont105pt"><div 

align="right">【<A class=a01 href="javascript:Print()">打印</A> 】【

<A 

href="javascript:window.close()">关闭</A>】【<a href="javascript:if(confirm('http://www.net130.com/sendmail.asp?filename=222427  \n\nThis file was not retrieved by Teleport Pro, because it is addressed on a domain or path outside the boundaries set for its Starting Address.  \n\nDo you want to open it from the server?'))window.location='http://www.net130.com/sendmail.asp?filename=222427'" tppabs="http://www.net130.com/sendmail.asp?filename=222427" target=_blank>发送给好友</a>】</div></td>
          </tr>
          <tr>
            
          <td width="51%" class="chinesefont105pt"> </td>
          <td width="49%" class="chinesefont105pt"> </td>
          </tr>
        </table>
        
          <table width="80%"  border="0" cellspacing="0" cellpadding="0" align="center">
            <tr>
              <td>

<script type="text/javascript"><!--
google_ad_client = "pub-4380430282956782";
google_ad_width = 468;
google_ad_height = 60;
google_ad_format = "468x60_as";
google_ad_channel ="3678136208";
google_ad_type = "text_image";
google_color_border = "336699";
google_color_bg = "FFFFFF";
google_color_link = "0000FF";
google_color_url = "008000";
google_color_text = "000000";
//--></script>
<script type="text/javascript"
  src="show_ads.js" tppabs="http://pagead2.googlesyndication.com/pagead/show_ads.js">
</script>
			</td>
            </tr>
          </table>
      <table 
      width=90% height="123" border=0 cellpadding=0 cellspacing=2 

class=gary 
      style="BORDER-BOTTOM: #adbb52 1px solid; BORDER-LEFT: #adbb52 

1px solid; BORDER-RIGHT: #adbb52 1px solid; BORDER-TOP: #adbb52 1px 

solid" align="center">
        <tbody>
        <tr align=left valign=center> 
          <td height=18 bgcolor=#f4f4db><strong><font 

color="#000000">相关信息</font></strong></td>
        </tr>
        <tr> 
          <td height="99" align=middle valign=top>
            <div align="left">·<a href= "222427.html" tppabs="http://www.net130.com/2004/5-12/222427.html" target=_blank>switch命令大全</a><br> </div>
          </td>
        </tr>
        </tbody> 
      </table>
      <table width="80%" border="0" cellspacing="0" cellpadding="0">
        <tr>
          <td> </td>
        </tr>
      </table>
      <!--<table 
      width=90% height="150" border=0 cellpadding=0 cellspacing=2 

class=gary 
      style="BORDER-BOTTOM: #adbb52 1px solid; BORDER-LEFT: #adbb52 

1px solid; BORDER-RIGHT: #adbb52 1px solid; BORDER-TOP: #adbb52 1px 

solid" align="center">
        <tbody> 
        <tr align=left valign=center> 
          <td height=19 

bgcolor=#f4f4db><strong>新闻评论</strong></td>
        </tr>
        <tr> 
          <td height="99" align=middle valign=top>
            <div align="left"><form method=post action=http://www.net130.com/add_review.asp><input type=hidden Name=FileName value=222427>共有评论<font color=red><script src=http://www.net130.com/reviewcount.asp?filename=222427></script></font>篇   <a href=222427.asp>查看评论</a><br>姓名：<input type=text name=Name><br><textarea name=Content cols=60 rows=5 title=不支持HTML，支持UBB代码></textarea></font><br><input type=submit name=Submit value=发表评论></form></div>
          </td>
        </tr>
        </tbody> 
      </table>-->
      <p> </p>
    </td>
    <td width="182" valign="top" bgcolor="#F4F4D9">
<table width="100%"  border="0" cellspacing="0" cellpadding="0">
      <tr>
        <td bgcolor="#FFFFFF"><img name="" 

src="space.gif" tppabs="http://www.net130.com/images/space.gif" width="1" height="1" alt=""></td>
      </tr>
    </table>
      <table width="100%"  border="0" cellspacing="0" 

cellpadding="0">
        <tr>
          <td height="20" bgcolor="#f4f4db">
		  
		  <script type="text/javascript"><!--
google_ad_client = "pub-4380430282956782";
google_ad_width = 160;
google_ad_height = 600;
google_ad_format = "160x600_as";
google_ad_channel ="0412572975";
google_ad_type = "text_image";
google_color_border = "FF4500";
google_color_bg = "FFEBCD";
google_color_link = "DE7008";
google_color_url = "E0AD12";
google_color_text = "8B4513";
//--></script>
<script type="text/javascript"
  src="show_ads.js" tppabs="http://pagead2.googlesyndication.com/pagead/show_ads.js">
</script>
		  
		  
		  </td>
        </tr>
        <tr>
          <td height="20" bgcolor="#FFCC00"><span 

class="glow1"><font color="#333333">热点文章</font></span></td>
        </tr>
        <tr>
          <td>
            <table width="100%" border="0" cellspacing="6" 

cellpadding="4">
              <tr>
                <td><script src="Hots_News.js" tppabs="http://www.net130.com/CodeJS/Hots_News.js"></script></td>
              </tr>
              <tr>
                <td> </td>
              </tr>
            </table>
          </td>
        </tr>
        <tr>
          <td> </td>
        </tr>
      </table>
      
    </td>
  </tr>
</table>
<table width="780" border="0" align="center" cellpadding="0" 

cellspacing="0">
  <tr>
    <td><img src="space.gif" tppabs="http://www.net130.com/images/space.gif" width="1" height="1"></td>
  </tr>
</table>
<table width="780" border="0" align="center" cellpadding="0" 

cellspacing="0">
  <tr>
    <td height="5" bgcolor="#FFFFFF"><hr align="center" 

size="1"></td>
  </tr>
</table>
<TABLE cellSpacing=0 cellPadding=0 width=780 align=center border=0>
  <TBODY>
    <TR>
      <TD height=70>
        
      <DIV align=center>
        <script src="copyright1.js" tppabs="http://www.net130.com/inc/copyright1.js"></script>
      </DIV>
    </TD>
    </TR>
  </TBODY>
</TABLE>
<p> </p>
<p> </p>
<p> </p>
</BODY>
</HTML>
上一页 12
💿 文件大小 40 K
👤 上传用户 rylzll
📂 所属分类通讯编程文档
🏷️ 相关标签

#CISCO #操作 #命令
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -