platform.reg

sansung s3c2410 bsp for wince 5.0

;
; Copyright (c) Microsoft Corporation.  All rights reserved.
;
;
; Use of this source code is subject to the terms of the Microsoft end-user
; license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
; If you did not accept the terms of the EULA, you are not authorized to use
; this source code. For a copy of the EULA, please see the LICENSE.RTF on your
; install media.
;

; Our variables
#define BUILTIN_ROOT HKEY_LOCAL_MACHINE\Drivers\BuiltIn
#define PCI_BUS_ROOT $(BUILTIN_ROOT)\PCI
#define DRIVERS_DIR $(_PUBLICROOT)\common\oak\drivers

; Copyright ?1999 Intel Corp. 
; Platform type: 1=DK3, 2=ODO 3=Rose
[HKEY_LOCAL_MACHINE\Platform]
   "Name"=LOC_PLATFORMNAME
   "Type"=dword:2

; @CESYSGEN IF FILESYS_FSREGHIVE
; @CESYSGEN ENDIF FILESYS_FSREGHIVE


; @CESYSGEN IF WCESHELLFE_MODULES_CTLPNL
; This registry setting controls the checkboxes displayed in the Sounds CPL
; under "enable clicks & taps". Set bit0 if you have a keyboard, set bit1 if
; you have a touch screen. Set bit2 if you have HW buttons (NOTE: for now
; HW buttons are mutually exclusive with the keyboard)
[HKEY_LOCAL_MACHINE\ControlPanel]
    "InputConfig"=dword:3   ; 3 => keybd and touch screen
; @CESYSGEN ENDIF WCESHELLFE_MODULES_CTLPNL

; @CESYSGEN IF WCESHELLFE_MODULES_EXPLORER
; @CESYSGEN ENDIF WCESHELLFE_MODULES_EXPLORER

; @CESYSGEN IF CE_MODULES_DEVICE

; Resources available at time of device.exe initialization.
; Key names are descriptive; resource ids are definitive.
; System ids are defined in ddk\inc\resmgr.h.
; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ]
   "Identifier"=dword:1
   "Minimum"=dword:1
   "Space"=dword:21
   "Ranges"="1-0x21"
;  "Shared"=""

[HKEY_LOCAL_MACHINE\Drivers\Resources\IO]
   "Identifier"=dword:2
   "Minimum"=dword:0
   "Space"=dword:10000
   "Ranges"="0-0xFFFF"
; END HIVE BOOT SECTION

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\CANBus]
	"Prefix"="CAN"
	"Dll"="CANBus.dll"
	"Order"=dword:1
	"Index"=dword:1

; @CESYSGEN IF CE_MODULES_POINTER   
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
  "MaxCalError"=dword:7
; portrait 
;  "CalibrationData"="500,512 762,268 758,760 244,758 241,266 "
; Landscape 
;   "CalibrationData"="515,503 763,748 258,749 269,255 764,255 "
; @CESYSGEN ENDIF CE_MODULES_POINTER   

; @CESYSGEN IF CE_MODULES_DISPLAY
IF BSP_NODISPLAY !
[HKEY_LOCAL_MACHINE\Drivers\Display\S3C2410\CONFIG]
	"DisplayDll"="s3c2410disp.dll"
	"LCDVirtualFrameBase"=dword:ac100000
	"LCDPhysicalFrameBase"=dword:30100000

[HKEY_LOCAL_MACHINE\System\GDI\Drivers]
    "Display"="s3c2410disp.dll"

; GWES will pass this value to the LCD driver; the driver will open the
; key to which it points to read its configuration.
[HKEY_LOCAL_MACHINE\System\GDI\DisplayCandidates]
	"Candidate10"="Drivers\\Display\\S3C2410\\CONFIG"
ENDIF BSP_NODISPLAY !
; @CESYSGEN ENDIF CE_MODULES_DISPLAY

; @CESYSGEN IF CE_MODULES_KEYBD
; Keybd driver is the same.
IF BSP_NOKEYBD !
#include "$(DRIVERS_DIR)\keybd\keybd.reg"

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
    "DriverName"="kbdmouse.dll"
    "SysIntr"=dword:10	; SYSINTR_FIRMWARE + 0
    "IOBase"=dword:B1600000
    "SSPBase"=dword:B1900000

#include "$(DRIVERS_DIR)\keybd\LayMgr.reg"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\$(input_locale)]
	"Matrix"="kbdmouse.dll"


ENDIF BSP_NOKEYBD !
; @CESYSGEN ENDIF CE_MODULES_KEYBD

; @CESYSGEN IF CE_MODULES_PCMCIA
; @CESYSGEN ENDIF CE_MODULES_PCMCIA

IF BSP_NOPWRBTN !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PBUT2410]
    "Dll"="pwrbtn2410.dll"
    "Prefix"="DSK"
    "Index"=dword:2
    "Order"=dword:2
    "Ioctl"=dword:4
    "FSD"= "fatfs.dll"
ENDIF BSP_NOPWRBTN !



IF BSP_NOAUDIO !
; @CESYSGEN IF CE_MODULES_WAVEAPI
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio]
   "Prefix"="WAV"
   "Dll"="wavedev.dll"
   "Index"=dword:1
   "Order"=dword:0
; @CESYSGEN ENDIF CE_MODULES_WAVEAPI

HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WAPIMAN\Clicks]
	"ClickDLL"="WavClick.dll"
	"KeyLoud"=dword:64
	"KeySoft"=dword:65
	"TouchLoud"=dword:66
	"TouchSoft"=dword:67
ENDIF BSP_NOAUDIO !

; usb host/device
;----------------------------------------------------------------------start
; USB Host
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\OHCI]
	"Prefix"="HCD"
	"Dll"="ohci.dll"
	"Index"=dword:1
	"Order"=dword:1
	"UseExistingSettings"=dword:0
	"Irq"=dword:01E
	"memBase"=dword:B0900000
	"Priority"=dword:255


;IF BSP_NOUSBSER !

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\USB]
	"Dll"="sc2410_usb_ser.Dll"
	"IoBase"=dword:B1200000
	"Irq"=dword:B
	"IoLen"=dword:130
	"Tsp"="Unimodem.dll"
	"DeviceArrayIndex"=dword:0
	"Prefix"="COM"
	"Order"=dword:2
	"DeviceType"=dword:0
	"FriendlyName"="SC2410 USB Cable:"
; Eliminate flow control bit
	"DevConfig"=hex: 10,00,00,00,05,00,00,00,00,01,00,00,00,4B,00,00,00,00,08,00,00,00,00,00,00

[HKEY_LOCAL_MACHINE\Comm\USB\Linkage]
	"Bind"=multi_sz:"SC2400USB1"
    
[HKEY_LOCAL_MACHINE\Comm\SC2400USB]
	"DisplayName"="SC2400 USB Driver"
	"Group"="Serial"
	"ImagePath"="sc2410_usb_ser.dll"

[HKEY_LOCAL_MACHINE\Comm\SC2400USB\Linkage]
	"Route"=multi_sz:"SC2400USB1"

[HKEY_LOCAL_MACHINE\Comm\SC2400USB1\Parms]
;ENDIF BSP_NOUSBSER !
;============= End of USB =================
; @CESYSGEN ENDIF CE_MODULES_USBD


;=============== UART0 (physical COM1 connector P1) (Serial) ===============
IF BSP_NOSERIAL !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SER2410]
   "DeviceArrayIndex"=dword:0
   "Irq"=dword:03
   "IoBase"=dword:50000000
   "IoLen"=dword:2C
   "Prefix"="COM"
   "Dll"="SER2410.Dll"
   "Order"=dword:0
   "Priority"=dword:0
   "Port"="COM1:"
   "DeviceType"=dword:0
   "FriendlyName"="Serial Cable on COM1:"
   "Tsp"="Unimodem.dll"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
ENDIF BSP_NOSERIAL !

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SER2410\Unimodem]
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:0
   "FriendlyName"="SER2410 UNIMODEM"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00

; S2410 IrDA(UART2)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IRDA2410]
	"DeviceArrayIndex"=dword:1
	"Irq"=dword:09
	"IoBase"=dword:50008000
	"IoLen"=dword:2C
	"Prefix"="COM3"
	"Dll"="IRDA2410.Dll"
	"Order"=dword:0
	"Priority"=dword:0
	"Port"="COM3:"
	"DeviceType"=dword:0  ; IRDA modem, 0 -> null modem
	"FriendlyName"="S2410 IRDA2410"
	"Index"=dword:2
	"IClass"="{A32942B7-920C-486b-B0E6-92A702A99B35}"

; Force IrCOMM & NDIS, which depend on serial, to loads load later.
; This is because serial depends on utldrv.
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IrCOMM]
   "Order"=dword:2

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\NDIS]
   "Order"=dword:2

[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
    "Bind"=multi_sz:"Irsir1"

[HKEY_LOCAL_MACHINE\Comm\Irsir]
   "DisplayName"=LOC_FRIENDLYINFRARED
   "Group"="NDIS"
   "ImagePath"="irsir.dll"

[HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage]
   "Route"=multi_sz:"Irsir1"

[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
   "BusNumber"=dword:0
   "BusType"=dword:0
   "Port"=dword:2
   ; 0 = Use external dongle, 1 = Use internal IR
   "IntIR"=dword:1
   ; 0 = Internal transceiver, 1 = Extended Systems JetEye dongle
   "TransceiverType"=dword:0

;Connectoids
[HKEY_LOCAL_MACHINE\Comm\DefaultConnections]
  "USB CONNECT"=multi_sz:"USB CONNECT","19200"
;LOC_19200=multi_sz:"SER2440 UNIMODEM","19200"
;LOC_38400=multi_sz:"SER2440 UNIMODEM","38400"
;LOC_115200=multi_sz:"SER2440 UNIMODEM","115200"
;LOC_IR=multi_sz:LOC_FRIENDLYINFRARED,"115200"
;LOC_57600=multi_sz:"SER2440 UNIMODEM","57600"

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Default Connection Setting 
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;Default Connectoid
[HKEY_CURRENT_USER\ControlPanel\Comm]
	"Cnct"="USB CONNECT"
	"AutoCnct"=dword:00000001
[HKEY_CURRENT_USER\Comm\RasBook\USB CONNECT]
"DevCfg"=hex:\
      30,00,00,00,05,00,00,00,00,01,00,00,00,4b,00,00,00,00,08,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\