zdhw.h

ZYDAS zd1211b driver for Linux2.4

#define		ZD_BCNPLCPCfg			0x0620
#define		ZD_GroupHash_P1			0x0624
#define		ZD_GroupHash_P2			0x0628
#define		ZD_RX_TIMEOUT			0x062C

#define		ZD_BasicRateTbl			0x0630
#define		ZD_MandatoryRateTbl		0x0634
#define		ZD_RTS_CTS_Rate			0x0638

//				Wep protect
//				_
//	if set to 0x114
//				 __
//				0x14 * slot time(if is 2us) = 40us = wep init time.
//
// So if we change slot time, change 0x14 to let wep init time close to 40us.
#define		ZD_Wep_Protect			0x063C
#define		ZD_RX_THRESHOLD			0x0640

#ifdef HOST_IF_USB
	#define		RFCFG1					0x0644
#else
	#define		ZD_TX_PE_CTRL			0x0644
#endif

#if defined(AMAC)
	#define		ZD_AfterPNP			0x0648
#endif

#if defined(OFDM)
	#define		ZD_AckTime80211		0x0658
#endif

#define		ZD_Rx_OFFSET			0x065c

#ifdef ZD1211B
	#define		ZD_BCNLENGTH			0x0664
#endif
#define		ZD_PHYDelay				0x066C
#define		ZD_BCNFIFO				0x0670
#define		ZD_SnifferOn			0x0674
#define		ZD_EncryType			0x0678
#ifdef ZD1211
	#define		ZD_RetryMAX				0x067C
#endif
#define		ZD_CtlReg1				0x0680	//Bit0:		IBSS mode
//Bit1:		PwrMgt mode
//Bit2-4 :	Highest basic rate
//Bit5:		Lock bit
//Bit6:		PLCP weight select
//Bit7:		PLCP switch
#define		ZD_DeviceState			0x0684
#define		ZD_UnderrunCnt			0x0688
#define		ZD_Rx_Filter			0x068c
#define		ZD_Ack_Timeout_Ext		0x0690
#define		ZD_BCN_FIFO_Semaphore	0x0694
#define		ZD_IFS_Value			0x0698
#define		ZD_RX_TIME_OUT			0x069C
#define		ZD_TotalRxFrm			0x06A0
#define		ZD_CRC32Cnt				0x06A4
#define		ZD_CRC16Cnt				0x06A8
#define		ZD_DecrypErr_UNI		0x06AC
#define		ZD_RxFIFOOverrun		0x06B0

#define		ZD_DecrypErr_Mul		0x06BC

#define		ZD_NAV_CNT				0x06C4
#define		ZD_NAV_CCA				0x06C8
#define		ZD_RetryCnt				0x06CC

#define		ZD_ReadTcbAddress		0x06E8
#define		ZD_ReadRfdAddress		0x06EC
#define		ZD_CWmin_CWmax			0x06F0
#define		ZD_TotalTxFrm			0x06F4

#define		ZD_CAM_MODE				0x0700
#define		ZD_CAM_ROLL_TB_LOW		0x0704
#define		ZD_CAM_ROLL_TB_HIGH		0x0708
#define		ZD_CAM_ADDRESS			0x070C
#define		ZD_CAM_DATA				0x0710

#define		ZD_ROMDIR				0x0714

#define		ZD_DECRY_ERR_FLG_LOW	0x0714
#define		ZD_DECRY_ERR_FLG_HIGH	0x0718

#define		ZD_WEPKey0				0x0720
#define		ZD_WEPKey1				0x0724
#define		ZD_WEPKey2				0x0728
#define		ZD_WEPKey3				0x072C
#define		ZD_WEPKey4				0x0730
#define		ZD_WEPKey5				0x0734
#define		ZD_WEPKey6				0x0738
#define		ZD_WEPKey7				0x073C
#define		ZD_WEPKey8				0x0740
#define		ZD_WEPKey9				0x0744
#define		ZD_WEPKey10				0x0748
#define		ZD_WEPKey11				0x074C
#define		ZD_WEPKey12				0x0750
#define		ZD_WEPKey13				0x0754
#define		ZD_WEPKey14				0x0758
#define		ZD_WEPKey15				0x075c
#define		ZD_TKIP_MODE			0x0760

#define		ZD_TX_CCM_MODE			0x0B80
#define		ZD_TX_CCM_MASK			0x0B84
#define		ZD_RX_CCM_MODE			0x0C88
#define		ZD_RX_CCM_MASK			0x0C8C


#define		ZD_EEPROM_PROTECT0		0x0758
#define		ZD_EEPROM_PROTECT1		0x075C

#define		ZD_Dbg_FIFO_Rd			0x0800
#define		ZD_Dbg_Select			0x0804
#define		ZD_FIFO_Length			0x0808


//#define		RF_Mode					0x080C
#define		ZD_RSSI_MGC				0x0810

#define		ZD_PON					0x0818
#define		ZD_Rx_ON				0x081C
#define		ZD_Tx_ON				0x0820
#define		ZD_CHIP_EN				0x0824
#define		ZD_LO_SW				0x0828
#define		ZD_TxRx_SW				0x082C
#define		ZD_S_MD					0x0830

#define		ZD_USB_DEBUG_PORT		0x0888

// EEPROM Memmory Map Region
#define		ZD_EEPROM_START_ADDRESS	0x0900
#define		ZD_E2P_SUBID			0x0900
#define		ZD_E2P_POD				0x0904
#define		ZD_E2P_MACADDR_P1		0x0908
#define		ZD_E2P_MACADDR_P2		0x090C
#define     ZD_E2P_PWR_CAL_VALUE1   0x0910
#define     ZD_E2P_PWR_CAL_VALUE2   0x0914
#define     ZD_E2P_PWR_CAL_VALUE3   0x0918
#define     ZD_E2P_PWR_CAL_VALUE4   0x091c
#define		ZD_E2P_PWR_INT_VALUE1	0x0920
#define		ZD_E2P_PWR_INT_VALUE2	0x0924
#define		ZD_E2P_PWR_INT_VALUE3	0x0928
#define		ZD_E2P_PWR_INT_VALUE4	0x092c
#define		ZD_E2P_ALLOWED_CHANNEL	0x0930


#ifdef HOST_IF_USB
	#define     E2P_DEVICE_VER          0x0940
	#define     E2P_PHY_REG             0x094A
	#define     E2P_36M_CAL_VALUE       0x0950
#define		ZD_E2P_36M_CAL_VALUE2			0x0954
#define         ZD_E2P_36M_CAL_VALUE3                   0x0958
#define         ZD_E2P_36M_CAL_VALUE4                   0x095C

#define		ZD_E2P_11A_INT_VALUE1			0x0960 //802.11a IntValue1 for All Rate
#define         ZD_E2P_11A_INT_VALUE2                   0x0964 //802.11a IntValue2 for All Rate
#define         ZD_E2P_11A_INT_VALUE3                   0x0968 //802.11a IntValue3 for All Rate
#define         ZD_E2P_48M_CAL_VALUE2                   0x0974
#define         ZD_E2P_48M_CAL_VALUE3                   0x0978
#define         ZD_E2P_48M_CAL_VALUE4                   0x097C

#define		ZD_E2P_A36M_CAL_VALUE			0x0980 //802.11a SetPoint for 36~6M
#define         ZD_E2P_A36M_CAL_VALUE2                  0x0984
#define         ZD_E2P_A36M_CAL_VALUE3                  0x0988
#define         ZD_E2P_A36M_CAL_VALUE4                  0x098C
#define         ZD_E2P_54M_CAL_VALUE2                   0x0994
#define         ZD_E2P_54M_CAL_VALUE3                   0x0998
#define         ZD_E2P_54M_CAL_VALUE4                   0x099C


#define		ZD_E2P_A54M_CAL_VALUE			0x09A0 //802.11a SetPoint for 54/48M
#define         ZD_E2P_A54M_CAL_VALUE2                  0x09A4
#define         ZD_E2P_A54M_CAL_VALUE3                  0x09A8
#define         ZD_E2P_A54M_CAL_VALUE4                  0x09AC
#define         ZD_E2P_11A_INT_VALUE4                   0x096C //802.11a IntValue4 for All Rate


#define     E2P_36M_INT_VALUE       0x0960
	#define     E2P_48M_CAL_VALUE       0x0970
	#define     E2P_48M_INT_VALUE       0x0980
	#define     E2P_54M_CAL_VALUE       0x0990
	#define     E2P_54M_INT_VALUE       0x09A0


#ifndef fNEW_CODE_MAP
		#define     E2P_END             0x09F0
    #else
		#define     E2P_END             0x09FC
    #endif
#else
	#define		ZD_E2P_PHY_REG			0x0934
	#define		ZD_E2P_REGION_CODE		0x0960
	#define		ZD_E2P_FEATURE_BITMAP	0x0964
	#define     ZD_E2P_END              0x0968
#endif

#ifdef ZD1211B
	#define 	ZD_RetryMAX				0x0B28
#endif

#ifdef HOST_IF_USB
	#ifdef ZD1211
		#define     FW_FIRMWARE_VER         0x0B00
		#define     FW_USB_SPEED            0x0B01
		#define     FW_FIX_TX_RATE          0x0B02
		#define     FW_LINK_STATUS          0x0B03
		#define     FW_SOFT_RESET           0x0B04
		#define     FW_FLASH_CHK            0x0B05
	#elif defined(ZD1211B)
        #define     FW_FIRMWARE_VER         0x0F00
        #define     FW_USB_SPEED            0x0F01
        #define     FW_FIX_TX_RATE          0x0F02
        #define     FW_LINK_STATUS          0x0F03
        #define     FW_SOFT_RESET           0x0F04
        #define     FW_FLASH_CHK            0x0F05
	#endif

#define     ZD1211_CLOCK_CTRL       0x8540
	#define     bZD1211_CLOCK_EEPROM    0
	#define     bmZD1211_CLOCK_EEPROM   mBIT(bZD1211_CLOCK_EEPROM)
	#define     UMAC_EPROM_ROM_ADDR     0x862A
	#define     UMAC_EPROM_RAM_ADDR     0x862B
	#define     UMAC_EPROM_DMA_LEN_DIR  0x862C
	#define     bmEPROM_XFER_DIR        BIT_15
	#define     UMAC_WAIT_STATE         0x8801
#endif


#define		ZD_TX_PWR_CTRL_1		0x0B00
#define		ZD_TX_PWR_CTRL_2		0x0B04
#define		ZD_TX_PWR_CTRL_3		0x0B08
#define		ZD_TX_PWR_CTRL_4		0x0B0C

#define		ZD_EPP_ROM_ADDRESS		0x0A04
#define		ZD_EPP_SRAM_ADDRESS		0x0A08
#define		ZD_EPP_LENG_DIR			0x0A0C
#define		ZD_EPP_CLOCK_DIV		0x0A10
#define		ZD_EPP_KEY_PROT			0x0A14

//HW MIC Engine
#define		ZD_MIC_START_ADDR0		0x0D00


#define		ZD_MIC_BLOCK0_LEN		0x0D04
#define		ZD_MIC_START_ADDR1		0x0D08
#define		ZD_MIC_BLOCK1_LEN		0x0D0C
#define		ZD_MIC_START_ADDR2		0x0D10
#define		ZD_MIC_BLOCK2_LEN		0x0D14
#define		ZD_MIC_START_ADDR3		0x0D18
#define		ZD_MIC_BLOCK3_LEN		0x0D1C
#define		ZD_MIC_START_ADDR4		0x0D20
#define		ZD_MIC_BLOCK4_LEN		0x0D24
#define		ZD_MIC_START_ADDR5		0x0D28
#define		ZD_MIC_BLOCK5_LEN		0x0D2C
#define		ZD_MIC_KEY_LOW			0x0D30
#define		ZD_MIC_KEY_HIGH			0x0D34
#define		ZD_MIC_VALUE_LOW		0x0D38
#define		ZD_MIC_VALUE_HIGH		0x0D3C
#define		ZD_MIC_STATUS			0x0D40
#define		ZD_MIC_TOTAL_BLOCK_NUM	0x0D44
#define		ZD_MIC_WRITE_BACK_ADDRS	0x0D48
#define		ZD_HOST_ENDIAN			0x0D4C


#define	SR_1M		0x02
#define	SR_2M		0x04
#define	SR_5_5M		0x0b
#define	SR_11M		0x16
#define	SR_16_5M	0x21
#define	SR_27_5M	0x37
#define	SR_6M		0x0c
#define	SR_9M		0x12
#define	SR_12M		0x18
#define	SR_18M		0x24
#define	SR_24M		0x30
#define	SR_36M		0x48
#define	SR_48M		0x60
#define	SR_54M		0x6c

void HW_Set_Intersil_Chips(zd_80211Obj_t *pObj, U32 ChannelNo, U8 InitChOnly);
void HW_Set_GCT_Chips(zd_80211Obj_t *pObj, U32 ChannelNo, U8 InitChOnly);
void HW_Set_AL7230B_RF_Chips(zd_80211Obj_t *pObj, U32 ChannelNo, U8 InitChOnly,U8 MAC_Mode);

void LockPhyReg(zd_80211Obj_t *pObj);
void UnLockPhyReg(zd_80211Obj_t *pObj);
void HW_SetSupportedRate(zd_80211Obj_t *pObj, U8 *prates);
void HW_EnableBeacon(zd_80211Obj_t *pObj, U16 BecaonInterval, U16 DtimPeriod, U8 BssType);
U32 HW_GetNow(zd_80211Obj_t *pObj);
void HW_GetTsf(zd_80211Obj_t *pObj, U32 *loTsf, U32 *hiTsf);
void HW_SetBeaconFIFO(zd_80211Obj_t *pObj, U8 *pBeacon, U16 index);
void HW_SwitchChannel(zd_80211Obj_t *pObj, U16 channel, U8 InitChOnly, const U8 MAC_Mode);
void HW_SetRfChannel(zd_80211Obj_t *pObj, U16 channel, U8 InitChOnly, const U8 MAC_Mode);

int HW_HTP(zd_80211Obj_t *pObj);
void HW_RadioOnOff(zd_80211Obj_t *pObj, U8 on);
void HW_Set_IF_Synthesizer(zd_80211Obj_t *pObj, U32 InputValue);
void HW_ResetPhy(zd_80211Obj_t *pObj);
void HW_InitHMAC(zd_80211Obj_t *pObj);
void HW_UpdateIntegrationValue(zd_80211Obj_t *pObj, U32 ChannelNo,const U8 MAC_Mode);

void HW_WritePhyReg(zd_80211Obj_t *pObj, U8 PhyIdx, U8 PhyValue);
void HW_OverWritePhyRegFromE2P(zd_80211Obj_t *pObj);
void HW_E2P_AutoPatch(zd_80211Obj_t *pObj);
void HW_SetSTA_PS(zd_80211Obj_t *pObj, U8 op);
void HW_Write_TxGain(zd_80211Obj_t *pObj, U32 txgain);
void HW_Set_FilterBand(zd_80211Obj_t *pObj, U32	region_code);
void HW_UpdateBcnInterval(zd_80211Obj_t *pObj, U16 BcnInterval);
void HW_UpdateATIMWindow(zd_80211Obj_t *pObj, U16 AtimWnd);
void HW_UpdatePreTBTT(zd_80211Obj_t *pObj, U32 pretbtt);


// for AMAC CAM operation
void HW_CAM_Avail(zd_80211Obj_t *pObj);
void HW_CAM_Write(zd_80211Obj_t *pObj, U32 address, U32 data);
U32 HW_CAM_Read(zd_80211Obj_t *pObj, U32 address);
void HW_CAM_SetMAC(zd_80211Obj_t *pObj, U16 aid, U8 *pMAC);
void HW_CAM_GetMAC(zd_80211Obj_t *pObj, U16 aid, U8 *pMac);
void HW_CAM_SetEncryType(zd_80211Obj_t *pObj, U16 aid, U8 encryType);
U8 HW_CAM_GetEncryType(zd_80211Obj_t *pObj, U16 aid);
void HW_CAM_SetKey(zd_80211Obj_t *pObj, U16 aid, U8 keyLength, U8 *pKey);
void HW_CAM_GetKey(zd_80211Obj_t *pObj, U16 aid, U8 keyLength, U8 *pKey);
void HW_CAM_UpdateRollTbl(zd_80211Obj_t *pObj, U16 aid);
void HW_CAM_ResetRollTbl(zd_80211Obj_t *pObj);
void HW_CAM_ClearRollTbl(zd_80211Obj_t *pObj, U16 aid);
//void HW_ConfigDynaKey(zd_80211Obj_t *pObj, U16 aid, U8 *pMac, U8 *pKey, U8 KeyLength, U8 encryType);
void HW_ConfigDynaKey(zd_80211Obj_t *pObj, U16 aid, U8 *pMac, U8 *pKey, U8 KeyLength, U8 encryType, U8 change_enc);
void HW_ConfigStatKey(zd_80211Obj_t *pObj, U8 *pKey, U8 keyLen, U32 startAddr);
void HW_GetStatKey(zd_80211Obj_t *pObj);
void HW_EEPROM_ACCESS(zd_80211Obj_t *pObj, U8 RamAddr, U32 RomAddr, U32 length, U8 bWrite);


//
void HW_Write_TxGain0(zd_80211Obj_t *pObj, U8 *pTxGain, U8 TxPwrType);
void HW_Write_TxGain1(zd_80211Obj_t *pObj, U8 txgain, U8 TxPwrType);
void HW_Write_TxGain2(zd_80211Obj_t *pObj, U8 TxPwrType);
#endif