lpfc_scsi.c

来自「linux2.6.16版本」· C语言 代码 · 共 1,304 行 · 第 1/3 页

C
1,304
字号
			/* Call FCP RSP handler to determine result */			lpfc_handle_fcp_err(lpfc_cmd);			break;		case IOSTAT_NPORT_BSY:		case IOSTAT_FABRIC_BSY:			cmd->result = ScsiResult(DID_BUS_BUSY, 0);			break;		default:			cmd->result = ScsiResult(DID_ERROR, 0);			break;		}		if ((pnode == NULL )		    || (pnode->nlp_state != NLP_STE_MAPPED_NODE))			cmd->result = ScsiResult(DID_BUS_BUSY, SAM_STAT_BUSY);	} else {		cmd->result = ScsiResult(DID_OK, 0);	}	if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {		uint32_t *lp = (uint32_t *)cmd->sense_buffer;		lpfc_printf_log(phba, KERN_INFO, LOG_FCP,				"%d:0710 Iodone <%d/%d> cmd %p, error x%x "				"SNS x%x x%x Data: x%x x%x\n",				phba->brd_no, cmd->device->id,				cmd->device->lun, cmd, cmd->result,				*lp, *(lp + 3), cmd->retries, cmd->resid);	}	result = cmd->result;	sdev = cmd->device;	cmd->scsi_done(cmd);	if (!result &&	   ((jiffies - pnode->last_ramp_up_time) >		LPFC_Q_RAMP_UP_INTERVAL * HZ) &&	   ((jiffies - pnode->last_q_full_time) >		LPFC_Q_RAMP_UP_INTERVAL * HZ) &&	   (phba->cfg_lun_queue_depth > sdev->queue_depth)) {		shost_for_each_device(tmp_sdev, sdev->host) {			if (phba->cfg_lun_queue_depth > tmp_sdev->queue_depth) {				if (tmp_sdev->id != sdev->id)					continue;				if (tmp_sdev->ordered_tags)					scsi_adjust_queue_depth(tmp_sdev,						MSG_ORDERED_TAG,						tmp_sdev->queue_depth+1);				else					scsi_adjust_queue_depth(tmp_sdev,						MSG_SIMPLE_TAG,						tmp_sdev->queue_depth+1);				pnode->last_ramp_up_time = jiffies;			}		}	}	/*	 * Check for queue full.  If the lun is reporting queue full, then	 * back off the lun queue depth to prevent target overloads.	 */	if (result == SAM_STAT_TASK_SET_FULL) {		pnode->last_q_full_time = jiffies;		shost_for_each_device(tmp_sdev, sdev->host) {			if (tmp_sdev->id != sdev->id)				continue;			depth = scsi_track_queue_full(tmp_sdev,					tmp_sdev->queue_depth - 1);		}		/* 		 * The queue depth cannot be lowered any more.		 * Modify the returned error code to store		 * the final depth value set by		 * scsi_track_queue_full.		 */		if (depth == -1)			depth = sdev->host->cmd_per_lun;		if (depth) {			lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,				"%d:0711 detected queue full - lun queue depth "				" adjusted to %d.\n", phba->brd_no, depth);		}	}	lpfc_release_scsi_buf(phba, lpfc_cmd);}static voidlpfc_scsi_prep_cmnd(struct lpfc_hba * phba, struct lpfc_scsi_buf * lpfc_cmd,			struct lpfc_nodelist *pnode){	struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;	struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);	int datadir = scsi_cmnd->sc_data_direction;	lpfc_cmd->fcp_rsp->rspSnsLen = 0;	/* clear task management bits */	lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;	int_to_scsilun(lpfc_cmd->pCmd->device->lun,			&lpfc_cmd->fcp_cmnd->fcp_lun);	memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);	if (scsi_cmnd->device->tagged_supported) {		switch (scsi_cmnd->tag) {		case HEAD_OF_QUEUE_TAG:			fcp_cmnd->fcpCntl1 = HEAD_OF_Q;			break;		case ORDERED_QUEUE_TAG:			fcp_cmnd->fcpCntl1 = ORDERED_Q;			break;		default:			fcp_cmnd->fcpCntl1 = SIMPLE_Q;			break;		}	} else		fcp_cmnd->fcpCntl1 = 0;	/*	 * There are three possibilities here - use scatter-gather segment, use	 * the single mapping, or neither.  Start the lpfc command prep by	 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first	 * data bde entry.	 */	if (scsi_cmnd->use_sg) {		if (datadir == DMA_TO_DEVICE) {			iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;			iocb_cmd->un.fcpi.fcpi_parm = 0;			iocb_cmd->ulpPU = 0;			fcp_cmnd->fcpCntl3 = WRITE_DATA;			phba->fc4OutputRequests++;		} else {			iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;			iocb_cmd->ulpPU = PARM_READ_CHECK;			iocb_cmd->un.fcpi.fcpi_parm =				scsi_cmnd->request_bufflen;			fcp_cmnd->fcpCntl3 = READ_DATA;			phba->fc4InputRequests++;		}	} else if (scsi_cmnd->request_buffer && scsi_cmnd->request_bufflen) {		if (datadir == DMA_TO_DEVICE) {			iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;			iocb_cmd->un.fcpi.fcpi_parm = 0;			iocb_cmd->ulpPU = 0;			fcp_cmnd->fcpCntl3 = WRITE_DATA;			phba->fc4OutputRequests++;		} else {			iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;			iocb_cmd->ulpPU = PARM_READ_CHECK;			iocb_cmd->un.fcpi.fcpi_parm =				scsi_cmnd->request_bufflen;			fcp_cmnd->fcpCntl3 = READ_DATA;			phba->fc4InputRequests++;		}	} else {		iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;		iocb_cmd->un.fcpi.fcpi_parm = 0;		iocb_cmd->ulpPU = 0;		fcp_cmnd->fcpCntl3 = 0;		phba->fc4ControlRequests++;	}	/*	 * Finish initializing those IOCB fields that are independent	 * of the scsi_cmnd request_buffer	 */	piocbq->iocb.ulpContext = pnode->nlp_rpi;	if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)		piocbq->iocb.ulpFCP2Rcvy = 1;	piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);	piocbq->context1  = lpfc_cmd;	piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;	piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;}static intlpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,			     struct lpfc_scsi_buf *lpfc_cmd,			     uint8_t task_mgmt_cmd){	struct lpfc_sli *psli;	struct lpfc_iocbq *piocbq;	IOCB_t *piocb;	struct fcp_cmnd *fcp_cmnd;	struct scsi_device *scsi_dev = lpfc_cmd->pCmd->device;	struct lpfc_rport_data *rdata = scsi_dev->hostdata;	struct lpfc_nodelist *ndlp = rdata->pnode;	if ((ndlp == NULL) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {		return 0;	}	psli = &phba->sli;	piocbq = &(lpfc_cmd->cur_iocbq);	piocb = &piocbq->iocb;	fcp_cmnd = lpfc_cmd->fcp_cmnd;	int_to_scsilun(lpfc_cmd->pCmd->device->lun,			&lpfc_cmd->fcp_cmnd->fcp_lun);	fcp_cmnd->fcpCntl2 = task_mgmt_cmd;	piocb->ulpCommand = CMD_FCP_ICMND64_CR;	piocb->ulpContext = ndlp->nlp_rpi;	if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {		piocb->ulpFCP2Rcvy = 1;	}	piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);	/* ulpTimeout is only one byte */	if (lpfc_cmd->timeout > 0xff) {		/*		 * Do not timeout the command at the firmware level.		 * The driver will provide the timeout mechanism.		 */		piocb->ulpTimeout = 0;	} else {		piocb->ulpTimeout = lpfc_cmd->timeout;	}	lpfc_cmd->rdata = rdata;	switch (task_mgmt_cmd) {	case FCP_LUN_RESET:		/* Issue LUN Reset to TGT <num> LUN <num> */		lpfc_printf_log(phba,				KERN_INFO,				LOG_FCP,				"%d:0703 Issue LUN Reset to TGT %d LUN %d "				"Data: x%x x%x\n",				phba->brd_no,				scsi_dev->id, scsi_dev->lun,				ndlp->nlp_rpi, ndlp->nlp_flag);		break;	case FCP_ABORT_TASK_SET:		/* Issue Abort Task Set to TGT <num> LUN <num> */		lpfc_printf_log(phba,				KERN_INFO,				LOG_FCP,				"%d:0701 Issue Abort Task Set to TGT %d LUN %d "				"Data: x%x x%x\n",				phba->brd_no,				scsi_dev->id, scsi_dev->lun,				ndlp->nlp_rpi, ndlp->nlp_flag);		break;	case FCP_TARGET_RESET:		/* Issue Target Reset to TGT <num> */		lpfc_printf_log(phba,				KERN_INFO,				LOG_FCP,				"%d:0702 Issue Target Reset to TGT %d "				"Data: x%x x%x\n",				phba->brd_no,				scsi_dev->id, ndlp->nlp_rpi,				ndlp->nlp_flag);		break;	}	return (1);}static intlpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba){	struct lpfc_iocbq *iocbq;	struct lpfc_iocbq *iocbqrsp;	int ret;	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);	if (!ret)		return FAILED;	lpfc_cmd->scsi_hba = phba;	iocbq = &lpfc_cmd->cur_iocbq;	iocbqrsp = lpfc_sli_get_iocbq(phba);	if (!iocbqrsp)		return FAILED;	ret = lpfc_sli_issue_iocb_wait(phba,				       &phba->sli.ring[phba->sli.fcp_ring],				       iocbq, iocbqrsp, lpfc_cmd->timeout);	if (ret != IOCB_SUCCESS) {		lpfc_cmd->status = IOSTAT_DRIVER_REJECT;		ret = FAILED;	} else {		ret = SUCCESS;		lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];		lpfc_cmd->status = iocbqrsp->iocb.ulpStatus;		if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&			(lpfc_cmd->result & IOERR_DRVR_MASK))				lpfc_cmd->status = IOSTAT_DRIVER_REJECT;	}	lpfc_sli_release_iocbq(phba, iocbqrsp);	return ret;}const char *lpfc_info(struct Scsi_Host *host){	struct lpfc_hba    *phba = (struct lpfc_hba *) host->hostdata[0];	int len;	static char  lpfcinfobuf[384];	memset(lpfcinfobuf,0,384);	if (phba && phba->pcidev){		strncpy(lpfcinfobuf, phba->ModelDesc, 256);		len = strlen(lpfcinfobuf);		snprintf(lpfcinfobuf + len,			384-len,			" on PCI bus %02x device %02x irq %d",			phba->pcidev->bus->number,			phba->pcidev->devfn,			phba->pcidev->irq);		len = strlen(lpfcinfobuf);		if (phba->Port[0]) {			snprintf(lpfcinfobuf + len,				 384-len,				 " port %s",				 phba->Port);		}	}	return lpfcinfobuf;}static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba){	unsigned long  poll_tmo_expires =		(jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));	if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt)		mod_timer(&phba->fcp_poll_timer,			  poll_tmo_expires);}void lpfc_poll_start_timer(struct lpfc_hba * phba){	lpfc_poll_rearm_timer(phba);}void lpfc_poll_timeout(unsigned long ptr){	struct lpfc_hba *phba = (struct lpfc_hba *)ptr;	unsigned long iflag;	spin_lock_irqsave(phba->host->host_lock, iflag);	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {		lpfc_sli_poll_fcp_ring (phba);		if (phba->cfg_poll & DISABLE_FCP_RING_INT)			lpfc_poll_rearm_timer(phba);	}	spin_unlock_irqrestore(phba->host->host_lock, iflag);}static intlpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)){	struct lpfc_hba *phba =		(struct lpfc_hba *) cmnd->device->host->hostdata[0];	struct lpfc_sli *psli = &phba->sli;	struct lpfc_rport_data *rdata = cmnd->device->hostdata;	struct lpfc_nodelist *ndlp = rdata->pnode;	struct lpfc_scsi_buf *lpfc_cmd;	struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));	int err;	err = fc_remote_port_chkready(rport);	if (err) {		cmnd->result = err;		goto out_fail_command;	}	/*	 * Catch race where our node has transitioned, but the	 * transport is still transitioning.	 */	if (!ndlp) {		cmnd->result = ScsiResult(DID_BUS_BUSY, 0);		goto out_fail_command;	}	lpfc_cmd = lpfc_get_scsi_buf (phba);	if (lpfc_cmd == NULL) {		lpfc_printf_log(phba, KERN_INFO, LOG_FCP,				"%d:0707 driver's buffer pool is empty, "				"IO busied\n", phba->brd_no);		goto out_host_busy;	}	/*	 * Store the midlayer's command structure for the completion phase	 * and complete the command initialization.	 */	lpfc_cmd->pCmd  = cmnd;	lpfc_cmd->rdata = rdata;	lpfc_cmd->timeout = 0;	cmnd->host_scribble = (unsigned char *)lpfc_cmd;	cmnd->scsi_done = done;	err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);	if (err)		goto out_host_busy_free_buf;	lpfc_scsi_prep_cmnd(phba, lpfc_cmd, ndlp);	err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],				&lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);	if (err)		goto out_host_busy_free_buf;	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {		lpfc_sli_poll_fcp_ring(phba);		if (phba->cfg_poll & DISABLE_FCP_RING_INT)			lpfc_poll_rearm_timer(phba);	}	return 0; out_host_busy_free_buf:	lpfc_release_scsi_buf(phba, lpfc_cmd); out_host_busy:	return SCSI_MLQUEUE_HOST_BUSY; out_fail_command:

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?