aicasm_insformat.h
来自「linux2.6.16版本」· C头文件 代码 · 共 220 行
H
220 行
/* * Instruction formats for the sequencer program downloaded to * Aic7xxx SCSI host adapters * * Copyright (c) 1997, 1998, 2000 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm_insformat.h#12 $ * * $FreeBSD$ */#include <asm/byteorder.h>/* 8bit ALU logic operations */struct ins_format1 {#ifdef __LITTLE_ENDIAN uint32_t immediate : 8, source : 9, destination : 9, ret : 1, opcode : 4, parity : 1;#else uint32_t parity : 1, opcode : 4, ret : 1, destination : 9, source : 9, immediate : 8;#endif};/* 8bit ALU shift/rotate operations */struct ins_format2 {#ifdef __LITTLE_ENDIAN uint32_t shift_control : 8, source : 9, destination : 9, ret : 1, opcode : 4, parity : 1;#else uint32_t parity : 1, opcode : 4, ret : 1, destination : 9, source : 9, shift_control : 8;#endif};/* 8bit branch control operations */struct ins_format3 {#ifdef __LITTLE_ENDIAN uint32_t immediate : 8, source : 9, address : 10, opcode : 4, parity : 1;#else uint32_t parity : 1, opcode : 4, address : 10, source : 9, immediate : 8;#endif};/* 16bit ALU logic operations */struct ins_format4 {#ifdef __LITTLE_ENDIAN uint32_t opcode_ext : 8, source : 9, destination : 9, ret : 1, opcode : 4, parity : 1;#else uint32_t parity : 1, opcode : 4, ret : 1, destination : 9, source : 9, opcode_ext : 8;#endif};/* 16bit branch control operations */struct ins_format5 {#ifdef __LITTLE_ENDIAN uint32_t opcode_ext : 8, source : 9, address : 10, opcode : 4, parity : 1;#else uint32_t parity : 1, opcode : 4, address : 10, source : 9, opcode_ext : 8;#endif};/* Far branch operations */struct ins_format6 {#ifdef __LITTLE_ENDIAN uint32_t page : 3, opcode_ext : 5, source : 9, address : 10, opcode : 4, parity : 1;#else uint32_t parity : 1, opcode : 4, address : 10, source : 9, opcode_ext : 5, page : 3;#endif};union ins_formats { struct ins_format1 format1; struct ins_format2 format2; struct ins_format3 format3; struct ins_format4 format4; struct ins_format5 format5; struct ins_format6 format6; uint8_t bytes[4]; uint32_t integer;};struct instruction { union ins_formats format; u_int srcline; struct symbol *patch_label; STAILQ_ENTRY(instruction) links;};#define AIC_OP_OR 0x0#define AIC_OP_AND 0x1#define AIC_OP_XOR 0x2#define AIC_OP_ADD 0x3#define AIC_OP_ADC 0x4#define AIC_OP_ROL 0x5#define AIC_OP_BMOV 0x6#define AIC_OP_MVI16 0x7#define AIC_OP_JMP 0x8#define AIC_OP_JC 0x9#define AIC_OP_JNC 0xa#define AIC_OP_CALL 0xb#define AIC_OP_JNE 0xc#define AIC_OP_JNZ 0xd#define AIC_OP_JE 0xe#define AIC_OP_JZ 0xf/* Pseudo Ops */#define AIC_OP_SHL 0x10#define AIC_OP_SHR 0x20#define AIC_OP_ROR 0x30/* 16bit Ops. Low byte main opcode. High byte extended opcode. */ #define AIC_OP_OR16 0x8005#define AIC_OP_AND16 0x8105#define AIC_OP_XOR16 0x8205#define AIC_OP_ADD16 0x8305#define AIC_OP_ADC16 0x8405#define AIC_OP_JNE16 0x8805#define AIC_OP_JNZ16 0x8905#define AIC_OP_JE16 0x8C05#define AIC_OP_JZ16 0x8B05#define AIC_OP_JMP16 0x9005#define AIC_OP_JC16 0x9105#define AIC_OP_JNC16 0x9205#define AIC_OP_CALL16 0x9305#define AIC_OP_CALL16 0x9305/* Page extension is low three bits of second opcode byte. */#define AIC_OP_JMPF 0xA005#define AIC_OP_CALLF 0xB005#define AIC_OP_JCF 0xC005#define AIC_OP_JNCF 0xD005#define AIC_OP_CMPXCHG 0xE005
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?