wdt977.c

来自「linux2.6.16版本」· C语言 代码 · 共 521 行

C
521
字号
/* *	Wdt977	0.04:	A Watchdog Device for Netwinder W83977AF chip * *	(c) Copyright 1998 Rebel.com (Woody Suwalski <woody@netwinder.org>) * *			----------------------- * *	This program is free software; you can redistribute it and/or *	modify it under the terms of the GNU General Public License *	as published by the Free Software Foundation; either version *	2 of the License, or (at your option) any later version. * *			----------------------- *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com> *           Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT *	19-Dec-2001 Woody Suwalski: Netwinder fixes, ioctl interface *	06-Jan-2002 Woody Suwalski: For compatibility, convert all timeouts *				    from minutes to seconds. *      07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in *                                    nwwatchdog_init. *      25-Oct-2005 Woody Suwalski: Convert addresses to #defs, add spinlocks *				    remove limitiation to be used on Netwinders only */#include <linux/module.h>#include <linux/moduleparam.h>#include <linux/config.h>#include <linux/types.h>#include <linux/kernel.h>#include <linux/fs.h>#include <linux/miscdevice.h>#include <linux/init.h>#include <linux/ioport.h>#include <linux/watchdog.h>#include <linux/notifier.h>#include <linux/reboot.h>#include <asm/io.h>#include <asm/system.h>#include <asm/mach-types.h>#include <asm/uaccess.h>#define WATCHDOG_VERSION  "0.04"#define WATCHDOG_NAME     "Wdt977"#define PFX WATCHDOG_NAME ": "#define DRIVER_VERSION    WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"#define IO_INDEX_PORT	0x370		/* on some systems it can be 0x3F0 */#define IO_DATA_PORT	(IO_INDEX_PORT+1)#define UNLOCK_DATA	0x87#define LOCK_DATA	0xAA#define DEVICE_REGISTER	0x07#define	DEFAULT_TIMEOUT	60			/* default timeout in seconds */static	int timeout = DEFAULT_TIMEOUT;static	int timeoutM;				/* timeout in minutes */static	unsigned long timer_alive;static	int testmode;static	char expect_close;static	spinlock_t spinlock;module_param(timeout, int, 0);MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");module_param(testmode, int, 0);MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");static int nowayout = WATCHDOG_NOWAYOUT;module_param(nowayout, int, 0);MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");/* * Start the watchdog */static int wdt977_start(void){	unsigned long flags;	spin_lock_irqsave(&spinlock, flags);	/* unlock the SuperIO chip */	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	/* select device Aux2 (device=8) and set watchdog regs F2, F3 and F4	 * F2 has the timeout in minutes	 * F3 could be set to the POWER LED blink (with GP17 set to PowerLed)	 *   at timeout, and to reset timer on kbd/mouse activity (not impl.)	 * F4 is used to just clear the TIMEOUT'ed state (bit 0)	 */	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);	outb_p(0x08, IO_DATA_PORT);	outb_p(0xF2, IO_INDEX_PORT);	outb_p(timeoutM, IO_DATA_PORT);	outb_p(0xF3, IO_INDEX_PORT);	outb_p(0x00, IO_DATA_PORT);	/* another setting is 0E for kbd/mouse/LED */	outb_p(0xF4, IO_INDEX_PORT);	outb_p(0x00, IO_DATA_PORT);	/* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */	/* in test mode watch the bit 1 on F4 to indicate "triggered" */	if (!testmode)	{		outb_p(DEVICE_REGISTER, IO_INDEX_PORT);		outb_p(0x07, IO_DATA_PORT);		outb_p(0xE6, IO_INDEX_PORT);		outb_p(0x08, IO_DATA_PORT);	}	/* lock the SuperIO chip */	outb_p(LOCK_DATA, IO_INDEX_PORT);	spin_unlock_irqrestore(&spinlock, flags);	printk(KERN_INFO PFX "activated.\n");	return 0;}/* * Stop the watchdog */static int wdt977_stop(void){	unsigned long flags;	spin_lock_irqsave(&spinlock, flags);	/* unlock the SuperIO chip */	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	/* select device Aux2 (device=8) and set watchdog regs F2,F3 and F4	* F3 is reset to its default state	* F4 can clear the TIMEOUT'ed state (bit 0) - back to default	* We can not use GP17 as a PowerLed, as we use its usage as a RedLed	*/	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);	outb_p(0x08, IO_DATA_PORT);	outb_p(0xF2, IO_INDEX_PORT);	outb_p(0xFF, IO_DATA_PORT);	outb_p(0xF3, IO_INDEX_PORT);	outb_p(0x00, IO_DATA_PORT);	outb_p(0xF4, IO_INDEX_PORT);	outb_p(0x00, IO_DATA_PORT);	outb_p(0xF2, IO_INDEX_PORT);	outb_p(0x00, IO_DATA_PORT);	/* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);	outb_p(0x07, IO_DATA_PORT);	outb_p(0xE6, IO_INDEX_PORT);	outb_p(0x08, IO_DATA_PORT);	/* lock the SuperIO chip */	outb_p(LOCK_DATA, IO_INDEX_PORT);	spin_unlock_irqrestore(&spinlock, flags);	printk(KERN_INFO PFX "shutdown.\n");	return 0;}/* * Send a keepalive ping to the watchdog * This is done by simply re-writing the timeout to reg. 0xF2 */static int wdt977_keepalive(void){	unsigned long flags;	spin_lock_irqsave(&spinlock, flags);	/* unlock the SuperIO chip */	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	/* select device Aux2 (device=8) and kicks watchdog reg F2 */	/* F2 has the timeout in minutes */	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);	outb_p(0x08, IO_DATA_PORT);	outb_p(0xF2, IO_INDEX_PORT);	outb_p(timeoutM, IO_DATA_PORT);	/* lock the SuperIO chip */	outb_p(LOCK_DATA, IO_INDEX_PORT);	spin_unlock_irqrestore(&spinlock, flags);	return 0;}/* * Set the watchdog timeout value */static int wdt977_set_timeout(int t){	int tmrval;	/* convert seconds to minutes, rounding up */	tmrval = (t + 59) / 60;	if (machine_is_netwinder()) {		/* we have a hw bug somewhere, so each 977 minute is actually only 30sec		 *  this limits the max timeout to half of device max of 255 minutes...		 */		tmrval += tmrval;	}	if ((tmrval < 1) || (tmrval > 255))		return -EINVAL;	/* timeout is the timeout in seconds, timeoutM is the timeout in minutes) */	timeout = t;	timeoutM = tmrval;	return 0;}/* * Get the watchdog status */static int wdt977_get_status(int *status){	int new_status;	unsigned long flags;	spin_lock_irqsave(&spinlock, flags);	/* unlock the SuperIO chip */	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	outb_p(UNLOCK_DATA, IO_INDEX_PORT);	/* select device Aux2 (device=8) and read watchdog reg F4 */	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);	outb_p(0x08, IO_DATA_PORT);	outb_p(0xF4, IO_INDEX_PORT);	new_status = inb_p(IO_DATA_PORT);	/* lock the SuperIO chip */	outb_p(LOCK_DATA, IO_INDEX_PORT);	spin_unlock_irqrestore(&spinlock, flags);	*status=0;	if (new_status & 1)		*status |= WDIOF_CARDRESET;	return 0;}/* *	/dev/watchdog handling */static int wdt977_open(struct inode *inode, struct file *file){	/* If the watchdog is alive we don't need to start it again */	if( test_and_set_bit(0,&timer_alive) )		return -EBUSY;	if (nowayout)		__module_get(THIS_MODULE);	wdt977_start();	return nonseekable_open(inode, file);}static int wdt977_release(struct inode *inode, struct file *file){	/*	 *	Shut off the timer.	 * 	Lock it in if it's a module and we set nowayout	 */	if (expect_close == 42)	{		wdt977_stop();		clear_bit(0,&timer_alive);	} else {		wdt977_keepalive();		printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");	}	expect_close = 0;	return 0;}/* *      wdt977_write: *      @file: file handle to the watchdog *      @buf: buffer to write (unused as data does not matter here *      @count: count of bytes *      @ppos: pointer to the position to write. No seeks allowed * *      A write to a watchdog device is defined as a keepalive signal. Any *      write of data will do, as we we don't define content meaning. */static ssize_t wdt977_write(struct file *file, const char __user *buf,			    size_t count, loff_t *ppos){	if (count)	{		if (!nowayout)		{			size_t i;			/* In case it was set long ago */			expect_close = 0;			for (i = 0; i != count; i++)			{				char c;				if (get_user(c, buf + i))					return -EFAULT;				if (c == 'V')					expect_close = 42;			}		}		/* someone wrote to us, we should restart timer */		wdt977_keepalive();	}	return count;}/* *      wdt977_ioctl: *      @inode: inode of the device *      @file: file handle to the device *      @cmd: watchdog command *      @arg: argument pointer * *      The watchdog API defines a common set of functions for all watchdogs *      according to their available features. */static struct watchdog_info ident = {	.options =		WDIOF_SETTIMEOUT |				WDIOF_MAGICCLOSE |				WDIOF_KEEPALIVEPING,	.firmware_version =	1,	.identity =		WATCHDOG_NAME,};static int wdt977_ioctl(struct inode *inode, struct file *file,	unsigned int cmd, unsigned long arg){	int status;	int new_options, retval = -EINVAL;	int new_timeout;	union {		struct watchdog_info __user *ident;		int __user *i;	} uarg;	uarg.i = (int __user *)arg;	switch(cmd)	{	default:		return -ENOIOCTLCMD;	case WDIOC_GETSUPPORT:		return copy_to_user(uarg.ident, &ident,			sizeof(ident)) ? -EFAULT : 0;	case WDIOC_GETSTATUS:		wdt977_get_status(&status);		return put_user(status, uarg.i);	case WDIOC_GETBOOTSTATUS:		return put_user(0, uarg.i);	case WDIOC_KEEPALIVE:		wdt977_keepalive();		return 0;	case WDIOC_SETOPTIONS:		if (get_user (new_options, uarg.i))			return -EFAULT;		if (new_options & WDIOS_DISABLECARD) {			wdt977_stop();			retval = 0;		}		if (new_options & WDIOS_ENABLECARD) {			wdt977_start();			retval = 0;		}		return retval;	case WDIOC_SETTIMEOUT:		if (get_user(new_timeout, uarg.i))			return -EFAULT;		if (wdt977_set_timeout(new_timeout))		    return -EINVAL;		wdt977_keepalive();		/* Fall */	case WDIOC_GETTIMEOUT:		return put_user(timeout, uarg.i);	}}static int wdt977_notify_sys(struct notifier_block *this, unsigned long code,	void *unused){	if(code==SYS_DOWN || code==SYS_HALT)		wdt977_stop();	return NOTIFY_DONE;}static struct file_operations wdt977_fops={	.owner		= THIS_MODULE,	.llseek		= no_llseek,	.write		= wdt977_write,	.ioctl		= wdt977_ioctl,	.open		= wdt977_open,	.release	= wdt977_release,};static struct miscdevice wdt977_miscdev={	.minor		= WATCHDOG_MINOR,	.name		= "watchdog",	.fops		= &wdt977_fops,};static struct notifier_block wdt977_notifier = {	.notifier_call = wdt977_notify_sys,};static int __init wd977_init(void){	int rc;	//if (!machine_is_netwinder())	//	return -ENODEV;	printk(KERN_INFO PFX DRIVER_VERSION);	spin_lock_init(&spinlock);	/* Check that the timeout value is within it's range ; if not reset to the default */	if (wdt977_set_timeout(timeout))	{		wdt977_set_timeout(DEFAULT_TIMEOUT);		printk(KERN_INFO PFX "timeout value must be 60<timeout<15300, using %d\n",			DEFAULT_TIMEOUT);	}	/* on Netwinder the IOports are already reserved by	 * arch/arm/mach-footbridge/netwinder-hw.c	 */	if (!machine_is_netwinder())	{		if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))		{			printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",				IO_INDEX_PORT);			rc = -EIO;			goto err_out;		}	}	rc = misc_register(&wdt977_miscdev);	if (rc)	{		printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",			wdt977_miscdev.minor, rc);		goto err_out_region;	}	rc = register_reboot_notifier(&wdt977_notifier);	if (rc)	{		printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",			rc);		goto err_out_miscdev;	}	printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n",		timeout, nowayout, testmode);	return 0;err_out_miscdev:        misc_deregister(&wdt977_miscdev);err_out_region:	if (!machine_is_netwinder())	        release_region(IO_INDEX_PORT,2);err_out:	return rc;}static void __exit wd977_exit(void){	wdt977_stop();	misc_deregister(&wdt977_miscdev);	unregister_reboot_notifier(&wdt977_notifier);	release_region(IO_INDEX_PORT,2);}module_init(wd977_init);module_exit(wd977_exit);MODULE_AUTHOR("Woody Suwalski <woodys@xandros.com>");MODULE_DESCRIPTION("W83977AF Watchdog driver");MODULE_LICENSE("GPL");MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?