mpc834x_sys.c
来自「linux2.6.16版本」· C语言 代码 · 共 244 行
C
244 行
/* * arch/powerpc/platforms/83xx/mpc834x_sys.c * * MPC834x SYS board specific routines * * Maintainer: Kumar Gala <galak@kernel.crashing.org> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */#include <linux/config.h>#include <linux/stddef.h>#include <linux/kernel.h>#include <linux/init.h>#include <linux/errno.h>#include <linux/reboot.h>#include <linux/pci.h>#include <linux/kdev_t.h>#include <linux/major.h>#include <linux/console.h>#include <linux/delay.h>#include <linux/seq_file.h>#include <linux/root_dev.h>#include <linux/module.h>#include <linux/fsl_devices.h>#include <asm/system.h>#include <asm/pgtable.h>#include <asm/page.h>#include <asm/atomic.h>#include <asm/time.h>#include <asm/io.h>#include <asm/machdep.h>#include <asm/ipic.h>#include <asm/bootinfo.h>#include <asm/pci-bridge.h>#include <asm/mpc83xx.h>#include <asm/irq.h>#include <mm/mmu_decl.h>#include <asm/prom.h>#include <asm/udbg.h>#include <sysdev/fsl_soc.h>#include "mpc83xx.h"#ifndef CONFIG_PCIunsigned long isa_io_base = 0;unsigned long isa_mem_base = 0;#endif#ifdef CONFIG_PCIextern int mpc83xx_pci2_busno;static intmpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin){ static char pci_irq_table[][4] = /* * PCI IDSEL/INTPIN->INTLINE * A B C D */ { {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ {0, 0, 0, 0}, {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ {0, 0, 0, 0}, /* idsel 0x19 */ {0, 0, 0, 0}, /* idsel 0x20 */ }; const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP;}static intmpc83xx_exclude_device(u_char bus, u_char devfn){ if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; if (mpc83xx_pci2_busno) if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL;}#endif /* CONFIG_PCI *//* ************************************************************************ * * Setup the architecture * */static void __initmpc834x_sys_setup_arch(void){ struct device_node *np; if (ppc_md.progress) ppc_md.progress("mpc834x_sys_setup_arch()", 0); np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { unsigned int *fp = (int *) get_property(np, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else loops_per_jiffy = 50000000 / HZ; of_node_put(np); }#ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); ppc_md.pci_swizzle = common_swizzle; ppc_md.pci_map_irq = mpc83xx_map_irq; ppc_md.pci_exclude_device = mpc83xx_exclude_device;#endif#ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS;#else ROOT_DEV = Root_HDA1;#endif}void __initmpc834x_sys_init_IRQ(void){ u8 senses[8] = { 0, /* EXT 0 */ IRQ_SENSE_LEVEL, /* EXT 1 */ IRQ_SENSE_LEVEL, /* EXT 2 */ 0, /* EXT 3 */#ifdef CONFIG_PCI IRQ_SENSE_LEVEL, /* EXT 4 */ IRQ_SENSE_LEVEL, /* EXT 5 */ IRQ_SENSE_LEVEL, /* EXT 6 */ IRQ_SENSE_LEVEL, /* EXT 7 */#else 0, /* EXT 4 */ 0, /* EXT 5 */ 0, /* EXT 6 */ 0, /* EXT 7 */#endif }; ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. */ ipic_set_default_priority();}#if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374)extern ulong ds1374_get_rtc_time(void);extern int ds1374_set_rtc_time(ulong);static int __initmpc834x_rtc_hookup(void){ struct timespec tv; ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; tv.tv_nsec = 0; tv.tv_sec = (ppc_md.get_rtc_time)(); do_settimeofday(&tv); return 0;}late_initcall(mpc834x_rtc_hookup);#endifstatic voidmpc83xx_restart(char *cmd){#define RST_OFFSET 0x00000900#define RST_PROT_REG 0x00000018#define RST_CTRL_REG 0x0000001c __be32 __iomem *reg; // map reset register space reg = ioremap(get_immrbase() + 0x900, 0xff); local_irq_disable(); /* enable software reset "RSTE" */ out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); /* set software hard reset */ out_be32(reg + (RST_CTRL_REG >> 2), 0x52535445); for(;;);}static long __initmpc83xx_time_init(void){#define SPCR_OFFSET 0x00000110#define SPCR_TBEN 0x00400000 __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); __be32 tmp; tmp = in_be32(spcr); out_be32(spcr, tmp|SPCR_TBEN); iounmap(spcr); return 0;}void __initplatform_init(void){ /* setup the PowerPC module struct */ ppc_md.setup_arch = mpc834x_sys_setup_arch; ppc_md.init_IRQ = mpc834x_sys_init_IRQ; ppc_md.get_irq = ipic_get_irq; ppc_md.restart = mpc83xx_restart; ppc_md.time_init = mpc83xx_time_init; ppc_md.set_rtc_time = NULL; ppc_md.get_rtc_time = NULL; ppc_md.calibrate_decr = generic_calibrate_decr; ppc_md.progress = udbg_progress; if (ppc_md.progress) ppc_md.progress("mpc834x_sys_init(): exit", 0); return;}
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?