ioutil.test

linux系统下的音频通信

# This file (iOUtil.test) tests the hookable TclStat(), TclAccess(),
# and Tcl_OpenFileChannel, routines in the file generic/tclIOUtils.c.
# Sourcing this file into Tcl runs the tests and generates output for
# errors. No output means no errors were found. 
# 
# Copyright (c) 1998 by Scriptics Corporation. 
# 
# See the file "license.terms" for information on usage and redistribution 
# of this file, and for a DISCLAIMER OF ALL WARRANTIES. 
# 
# SCCS: @(#) iOUtil.test 1.4 98/08/07 12:02:42
 
if {[string compare test [info procs test]] == 1} then {source defs}

set unsetScript {
    catch {unset testStat1(size)}
    catch {unset testStat2(size)}
    catch {unset testStat3(size)}
}

test stat-1.1 {TclStat: Check that none of the test procs are there.} {
    catch {file stat testStat1%.fil testStat1} err1
    catch {file stat testStat2%.fil testStat2} err2
    catch {file stat testStat3%.fil testStat3} err3
    list $err1 $err2 $err3
} {{couldn't stat "testStat1%.fil": no such file or directory} {couldn't stat "testStat2%.fil": no such file or directory} {couldn't stat "testStat3%.fil": no such file or directory}}

if {[info commands teststatproc] == {}} {
    puts "This application hasn't been compiled with the \"teststatproc\""
    puts "command, so I can't test Tcl_Stat_* etc."
} else {
test stat-1.2 {TclStatInsertProc: Insert the 3 test TclStat_ procedures.} {
    catch {teststatproc insert TclpStat} err1
    teststatproc insert TestStatProc1
    teststatproc insert TestStatProc2
    teststatproc insert TestStatProc3
    set err1
} {bad arg "insert": must be TestStatProc1, TestStatProc2, or TestStatProc3}

test stat-1.3 {TclStat: Use "file stat ?" to invoke each procedure.} {
    file stat testStat2%.fil testStat2
    file stat testStat1%.fil testStat1
    file stat testStat3%.fil testStat3

    list $testStat2(size) $testStat1(size) $testStat3(size)
} {2345 1234 3456}

eval $unsetScript

test stat-1.4 {TclStatDeleteProc: "TclpStat" function should not be deletedable.} {
    catch {teststatproc delete TclpStat} err2
    set err2
} {"TclpStat": could not be deleteed}

test stat-1.5 {TclStatDeleteProc: Delete the 2nd TclStat procedure.} {
    # Delete the 2nd procedure and test that it longer exists but that
    #   the others do actually return a result.

    teststatproc delete TestStatProc2
    file stat testStat1%.fil testStat1
    catch {file stat testStat2%.fil testStat2} err3
    file stat testStat3%.fil testStat3

    list $testStat1(size) $err3 $testStat3(size)
} {1234 {couldn't stat "testStat2%.fil": no such file or directory} 3456}

eval $unsetScript

test stat-1.6 {TclStatDeleteProc: Delete the 1st TclStat procedure.} {
    # Next delete the 1st procedure and test that only the 3rd procedure
    #   is the only one that exists.

    teststatproc delete TestStatProc1
    catch {file stat testStat1%.fil testStat1} err4
    catch {file stat testStat2%.fil testStat2} err5
    file stat testStat3%.fil testStat3

    list $err4 $err5 $testStat3(size)
} {{couldn't stat "testStat1%.fil": no such file or directory} {couldn't stat "testStat2%.fil": no such file or directory} 3456}

eval $unsetScript

test stat-1.7 {TclStatDeleteProc: Delete the 3rd procedure & verify all are gone.} {
    # Finally delete the 3rd procedure and check that none of the
    #   procedures exist.

    teststatproc delete TestStatProc3
    catch {file stat testStat1%.fil testStat1} err6
    catch {file stat testStat2%.fil testStat2} err7
    catch {file stat testStat3%.fil testStat3} err8

    list $err6 $err7 $err8
} {{couldn't stat "testStat1%.fil": no such file or directory} {couldn't stat "testStat2%.fil": no such file or directory} {couldn't stat "testStat3%.fil": no such file or directory}}

eval $unsetScript

test stat-1.8 {TclStatDeleteProc: Verify that all procs have been deleted.} {
    # Attempt to delete all the Stat procs. again to ensure they no longer
    #   exist and an error is returned.

    catch {teststatproc delete TestStatProc1} err9
    catch {teststatproc delete TestStatProc2} err10
    catch {teststatproc delete TestStatProc3} err11

    list $err9 $err10 $err11
} {{"TestStatProc1": could not be deleteed} {"TestStatProc2": could not be deleteed} {"TestStatProc3": could not be deleteed}}
}

eval $unsetScript


test access-1.1 {TclAccess: Check that none of the test procs are there.} {
    catch {file exists testAccess1%.fil} err1
    catch {file exists testAccess2%.fil} err2
    catch {file exists testAccess3%.fil} err3
    list $err1 $err2 $err3
} {0 0 0}

if {[info commands testaccessproc] == {}} {
    puts "This application hasn't been compiled with the \"testaccessproc\""
    puts "command, so I can't test Tcl_Access_* etc."
} else {
test access-1.2 {TclAccessInsertProc: Insert the 3 test TclAccess_ procedures.} {
    catch {testaccessproc insert TclpAccess} err1
    testaccessproc insert TestAccessProc1
    testaccessproc insert TestAccessProc2
    testaccessproc insert TestAccessProc3
    set err1
} {bad arg "insert": must be TestAccessProc1, TestAccessProc2, or TestAccessProc3}

test access-1.3 {TclAccess: Use "file access ?" to invoke each procedure.} {
    list \
    	[file exists testAccess2%.fil] \
   		[file exists testAccess1%.fil] \
		[file exists testAccess3%.fil]
} {1 1 1}

test access-1.4 {TclAccessDeleteProc: "TclpAccess" function should not be deletedable.} {
    catch {testaccessproc delete TclpAccess} err2
    set err2
} {"TclpAccess": could not be deleteed}

test accesst-1.5 {TclAccessDeleteProc: Delete the 2nd TclAccess procedure.} {
    # Delete the 2nd procedure and test that it longer exists but that
    #   the others do actually return a result.

    testaccessproc delete TestAccessProc2
    set res1 [file exists testAccess1%.fil]
    catch {file exists testAccess2%.fil} err3
    set res2 [file exists testAccess3%.fil]

    list $res1 $err3 $res2
} {1 0 1}

test access-1.6 {TclAccessDeleteProc: Delete the 1st TclAccess procedure.} {
    # Next delete the 1st procedure and test that only the 3rd procedure
    #   is the only one that exists.

    testaccessproc delete TestAccessProc1
    catch {file exists testAccess1%.fil} err4
    catch {file exists testAccess2%.fil} err5
    set res3 [file exists testAccess3%.fil]

    list $err4 $err5 $res3
} {0 0 1}

test access-1.7 {TclAccessDeleteProc: Delete the 3rd procedure & verify all are gone.} {
    # Finally delete the 3rd procedure and check that none of the
    #   procedures exist.

    testaccessproc delete TestAccessProc3
    catch {file exists testAccess1%.fil} err6
    catch {file exists testAccess2%.fil} err7
    catch {file exists testAccess3%.fil} err8

    list $err6 $err7 $err8
} {0 0 0}

test access-1.8 {TclAccessDeleteProc: Verify that all procs have been deleted.} {
    # Attempt to delete all the Access procs. again to ensure they no longer
    #   exist and an error is returned.

    catch {testaccessproc delete TestAccessProc1} err9
    catch {testaccessproc delete TestAccessProc2} err10
    catch {testaccessproc delete TestAccessProc3} err11

    list $err9 $err10 $err11
} {{"TestAccessProc1": could not be deleteed} {"TestAccessProc2": could not be deleteed} {"TestAccessProc3": could not be deleteed}}
}

test openfilechannel-1.1 {TclOpenFileChannel: Check that none of the test procs are there.} {
    catch {file exists __testOpenFileChannel1%__.fil} err1
    catch {file exists __testOpenFileChannel2%__.fil} err2
    catch {file exists __testOpenFileChannel3%__.fil} err3
    catch {file exists __testOpenFileChannel1%__.fil} err4
    catch {file exists __testOpenFileChannel2%__.fil} err5
    catch {file exists __testOpenFileChannel3%__.fil} err6
    list $err1 $err2 $err3 $err4 $err5 $err6
} {0 0 0 0 0 0}

if {[info commands testopenfilechannelproc] == {}} {
    puts "This application hasn't been compiled with the \"testopenfilechannelproc\""
    puts "command, so I can't test Tcl_OpenFileChannelInsert"
} else {
test openfilechannel-1.2 {TclOpenFileChannelInsertProc: Insert the 3 test TclOpenFileChannel_ procedures.} {
    catch {testopenfilechannelproc insert TclpOpenFileChannel} err1
    testopenfilechannelproc insert TestOpenFileChannelProc1
    testopenfilechannelproc insert TestOpenFileChannelProc2
    testopenfilechannelproc insert TestOpenFileChannelProc3
    set err1
} {bad arg "insert": must be TestOpenFileChannelProc1, TestOpenFileChannelProc2, or TestOpenFileChannelProc3}

test openfilechannel-1.3 {TclOpenFileChannel: Use "file openfilechannel ?" to invoke each procedure.} {
	close [open __testOpenFileChannel1%__.fil w]
	close [open __testOpenFileChannel2%__.fil w]
	close [open __testOpenFileChannel3%__.fil w]

	catch {
		close [open testOpenFileChannel1%.fil r]
		close [open testOpenFileChannel2%.fil r]
		close [open testOpenFileChannel3%.fil r]
	} err

	file delete __testOpenFileChannel1%__.fil
	file delete __testOpenFileChannel2%__.fil
	file delete __testOpenFileChannel3%__.fil

	set err
} {}

test openfilechannel-1.4 {TclOpenFileChannelDeleteProc: "TclpOpenFileChannel" function should not be deletedable.} {
    catch {testopenfilechannelproc delete TclpOpenFileChannel} err2
    set err2
} {"TclpOpenFileChannel": could not be deleteed}

test openfilechannelt-1.5 {TclOpenFileChannelDeleteProc: Delete the 2nd TclOpenFileChannel procedure.} {
    # Delete the 2nd procedure and test that it longer exists but that
    #   the others do actually return a result.

    testopenfilechannelproc delete TestOpenFileChannelProc2

	close [open __testOpenFileChannel1%__.fil w]
	close [open __testOpenFileChannel3%__.fil w]

	catch {
		close [open testOpenFileChannel1%.fil r]
		catch {close [open testOpenFileChannel2%.fil r]}
		close [open testOpenFileChannel3%.fil r]
	} err3

	file delete __testOpenFileChannel1%__.fil
	file delete __testOpenFileChannel3%__.fil

    set err3
} {}

test openfilechannel-1.6 {TclOpenFileChannelDeleteProc: Delete the 1st TclOpenFileChannel procedure.} {
    # Next delete the 1st procedure and test that only the 3rd procedure
    #   is the only one that exists.

    testopenfilechannelproc delete TestOpenFileChannelProc1

	close [open __testOpenFileChannel3%__.fil w]

	catch {
		catch {close [open testOpenFileChannel1%.fil r]}
		catch {close [open testOpenFileChannel2%.fil r]}
		close [open testOpenFileChannel3%.fil r]
	} err4

	file delete __testOpenFileChannel3%__.fil

    set err4
} {}

test openfilechannel-1.7 {TclOpenFileChannelDeleteProc: Delete the 3rd procedure & verify all are gone.} {
    # Finally delete the 3rd procedure and check that none of the
    #   procedures exist.

    testopenfilechannelproc delete TestOpenFileChannelProc3
	catch {
		catch [open testOpenFileChannel1%.fil r]
		catch [open testOpenFileChannel2%.fil r]
		catch [open testOpenFileChannel3%.fil r]
	} err5

    set err5
} {1}

test openfilechannel-1.8 {TclOpenFileChannelDeleteProc: Verify that all procs have been deleted.} {
    # Attempt to delete all the OpenFileChannel procs. again to ensure they no longer
    #   exist and an error is returned.

    catch {testopenfilechannelproc delete TestOpenFileChannelProc1} err9
    catch {testopenfilechannelproc delete TestOpenFileChannelProc2} err10
    catch {testopenfilechannelproc delete TestOpenFileChannelProc3} err11

    list $err9 $err10 $err11
} {{"TestOpenFileChannelProc1": could not be deleteed} {"TestOpenFileChannelProc2": could not be deleteed} {"TestOpenFileChannelProc3": could not be deleteed}}
}