eth_txethmac.v

该文件包含以太网IP核的相关代码

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  eth_txethmac.v                                              ////
////                                                              ////
////  This file is part of the Ethernet IP core project           ////
////  http://www.opencores.org/cores/ethmac/                      ////
////                                                              ////
////  Author(s):                                                  ////
////      - Igor Mohor ([e-mail])                      ////
////      - Novan Hartadi ([e-mail])                  ////
////      - Mahmud Galela ([e-mail])                ////
////                                                              ////
////  All additional information is avaliable in the Readme.txt   ////
////  file.                                                       ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2001 Authors                                   ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: eth_txethmac.v,v $
// Revision 1.3  2001/10/19 08:43:51  mohor
// eth_timescale.v changed to timescale.v This is done because of the
// simulation of the few cores in a one joined project.
//
// Revision 1.2  2001/09/11 14:17:00  mohor
// Few little NCSIM warnings fixed.
//
// Revision 1.1  2001/08/06 14:44:29  mohor
// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
// Include files fixed to contain no path.
// File names and module names changed ta have a eth_ prologue in the name.
// File eth_timescale.v is used to define timescale
// All pin names on the top module are changed to contain _I, _O or _OE at the end.
// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
// and Mdo_OE. The bidirectional signal must be created on the top level. This
// is done due to the ASIC tools.
//
// Revision 1.1  2001/07/30 21:23:42  mohor
// Directory structure changed. Files checked and joind together.
//
// Revision 1.3  2001/06/19 18:16:40  mohor
// TxClk changed to MTxClk (as discribed in the documentation).
// Crc changed so only one file can be used instead of two.
//
// Revision 1.2  2001/06/19 10:38:08  mohor
// Minor changes in header.
//
// Revision 1.1  2001/06/19 10:27:58  mohor
// TxEthMAC initial release.
//
//
//

`include "timescale.v"


module eth_txethmac (MTxClk, Reset, TxStartFrm, TxEndFrm, TxUnderRun, TxData, CarrierSense, 
                     Collision, Pad, CrcEn, FullD, HugEn, DlyCrcEn, MinFL, MaxFL, IPGT, 
                     IPGR1, IPGR2, CollValid, MaxRet, NoBckof, ExDfrEn, 
                     MTxD, MTxEn, MTxErr, TxDone, TxRetry, TxAbort, TxUsedData, WillTransmit, 
                     ResetCollision
                    );

parameter Tp = 1;


input MTxClk;                   // Transmit clock (from PHY)
input Reset;                    // Reset
input TxStartFrm;               // Transmit packet start frame
input TxEndFrm;                 // Transmit packet end frame
input TxUnderRun;               // Transmit packet under-run
input [7:0] TxData;             // Transmit packet data byte
input CarrierSense;             // Carrier sense (synchronized)
input Collision;                // Collision (synchronized)
input Pad;                      // Pad enable (from register)
input CrcEn;                    // Crc enable (from register)
input FullD;                    // Full duplex (from register)
input HugEn;                    // Huge packets enable (from register)
input DlyCrcEn;                 // Delayed Crc enabled (from register)
input [15:0] MinFL;             // Minimum frame length (from register)
input [15:0] MaxFL;             // Maximum frame length (from register)
input [6:0] IPGT;               // Back to back transmit inter packet gap parameter (from register)
input [6:0] IPGR1;              // Non back to back transmit inter packet gap parameter IPGR1 (from register)
input [6:0] IPGR2;              // Non back to back transmit inter packet gap parameter IPGR2 (from register)
input [5:0] CollValid;          // Valid collision window (from register)
input [3:0] MaxRet;             // Maximum retry number (from register)
input NoBckof;                  // No backoff (from register)
input ExDfrEn;                  // Excessive defferal enable (from register)

output [3:0] MTxD;              // Transmit nibble (to PHY)
output MTxEn;                   // Transmit enable (to PHY)
output MTxErr;                  // Transmit error (to PHY)
output TxDone;                  // Transmit packet done (to RISC)
output TxRetry;                 // Transmit packet retry (to RISC)
output TxAbort;                 // Transmit packet abort (to RISC)
output TxUsedData;              // Transmit packet used data (to RISC)
output WillTransmit;            // Will transmit (to RxEthMAC)
output ResetCollision;          // Reset Collision (for synchronizing collision)

reg [3:0] MTxD;
reg MTxEn;
reg MTxErr;
reg TxDone;
reg TxRetry;
reg TxAbort;
reg TxUsedData;
reg WillTransmit;
reg ColWindow;
reg StopExcessiveDeferOccured;
reg [3:0] RetryCnt;
reg [3:0] MTxD_d;
reg StatusLatch;
reg PacketFinished_q;
reg PacketFinished;


wire ExcessiveDeferOccured;
wire StartDefer;
wire StartIPG;
wire StartPreamble;
wire [1:0] StartData;
wire StartFCS;
wire StartJam;
wire StartBackoff;
wire StateDefer;
wire StateIPG;
wire StateIdle;
wire StatePreamble;
wire [1:0] StateData;
wire StatePAD;
wire StateFCS;
wire StateJam;
wire StateBackOff;
wire StateSFD;
wire StartTxRetry;
wire StartTxDone;
wire LateCollision;
wire MaxCollisionOccured;
wire UnderRun;
wire TooBig;
wire StartTxAbort;
wire [31:0] Crc;
wire CrcError;
wire [2:0] DlyCrcCnt;
wire [15:0] NibCnt;
wire NibCntEq7;
wire NibCntEq15;
wire NibbleMinFl;
wire ExcessiveDefer;
wire [15:0] ByteCnt;
wire MaxFrame;
wire RetryMax;
wire RandomEq0;
wire RandomEqByteCnt;
wire PacketFinished_d;



assign ResetCollision = ~(StatePreamble | (|StateData) | StatePAD | StateFCS);

assign ExcessiveDeferOccured = TxStartFrm & StateDefer & ExcessiveDefer & ~StopExcessiveDeferOccured;

assign StartTxDone = ~Collision & (StateFCS & NibCntEq7 | StateData[1] & TxEndFrm & ~Pad & ~CrcEn);

assign UnderRun = StateData[0] & TxUnderRun & ~Collision;

assign TooBig = ~Collision & MaxFrame & (StateData[0] & ~TxUnderRun | StateFCS);

assign StartTxRetry = StartJam & (ColWindow & ~RetryMax);

assign LateCollision = StartJam & ~ColWindow & ~UnderRun;

assign MaxCollisionOccured = StartJam & ColWindow & RetryMax;

assign StateSFD = StatePreamble & NibCntEq15;

assign StartTxAbort = TooBig | UnderRun | ExcessiveDeferOccured | LateCollision | MaxCollisionOccured;


// StopExcessiveDeferOccured
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    StopExcessiveDeferOccured <= #Tp 1'b0;
  else
    begin
      if(~TxStartFrm)
        StopExcessiveDeferOccured <= #Tp 1'b0;
      else
      if(ExcessiveDeferOccured)
        StopExcessiveDeferOccured <= #Tp 1'b1;
    end
end


// Collision Window
always @ (posedge MTxClk or posedge Reset)
begin
  if(Reset)
    ColWindow <= #Tp 1'b1;
  else
    begin  
      if(~Collision & ByteCnt[5:0] == CollValid[5:0] & (StateData[1] | StatePAD & NibCnt[0] | StateFCS & NibCnt[0]))
        ColWindow <= #Tp 1'b0;
      else
      if(StateIdle | StateIPG)
        ColWindow <= #Tp 1'b1;
    end
end