mwnidaq.ini

一本很好的电子书 给别人参考 特别是初学着 很有帮助

; mwnidaq.ini
;
; Data Acquisition Toolbox Hardware Database for 
; National Instruments' Devices
;
; Copyright 1998-2003 The MathWorks, Inc.
; $Revision: 1.1.6.2 $  $Date: 2004/01/16 19:58:34 $
;
;************ Definitions **************
; [board###]       - National Instruments Board codes. 
;                    These codes can be found in the NI-DAQ Function 
;                    Reference Manual under Init_DA_Brds
; name             - Board Name
; bus              - Bus type
; device           - Device Types by NI-DAQ function category
; adcResolution    - Maximum number of data bits used to represent the input
; dacResolution    - Maximum number of data bits used to represent the output
; maxAISR          - Maximum single channel analog input sample rate
; maxAOSR          - Maximum single channel analog output sample rate 
;                    (non-FIFO, 1 Ch)
; settleTime       - Time to settle to the accuracy of the ADC (MicroSeconds)
; inputs           - Maximum number of single ended inputs
; outputs          - Maximum number of outputs
; SEInputIDs       - Comma seperated list of input ids defaults to 
;                    0,1...inputs
; DIInputIDs       - Comma seperated list of input ids defaults to 
;                    0,1...inputs/2
; diolines         - Maximum number of digital input/output lines
; scanning         - Scanning (1) or Simultaneous Sample and Hold (0)
; analogTrig       - Analog triggering available (1) or unavailable (0)
; digitalTrig      - Digital triggering available (1) or unavailable (0)
; unipolarGains    - available input gains for unipolar operation 
; unipolarGainsInt - Integer values for unipolar gains
; bipolarGains     - available input gains for bipolar operation
; bipolarGainsInt  - Integer values for unipolar gains
; bipolarRange     - ranges at a gain of 1 for bipolar operation range is 
;                    +-value 
; unipolarRange    - ranges at a gain of 1 for unipolar operation 
; MITE             - Has a MITE chip (1) or does not have a MITE chip (0). 
;                    A MITE chip adds 32 to the FIFO sizes.  Currently on 
;                    PCI and PXI.
; coupling         - comma seperated list of couplings
; ADCFIFO          - Input FIFO size
; DACFIFO          - Output FIFO size
; dacBipolarRange  - Voltage ranges for ao bipolar
; dacUnipolarRange - Voltage ranges ao unipolar 0 for no unipolar operation
;
[board7]
ConfigId=10496368
name=PC-DIO-24
bus=AT
device=3
diolines=24

[board8]
ConfigId=10146048
name=AT-DIO-32F
bus=AT
device=2
diolines=36

[board12]
ConfigId=10151424
name=PC-DIO-96
bus=AT
device=7
diolines=96

[board13]
ConfigId=10858848
name=PC-LPM-16
bus=AT
device=8
adcResolution=12
settleTime=20
inputs=16
maxAISR=50000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
scanning=1
analogTrig=0
digitalTrig=0
SpecialUnipolarGains=1
unipolarRange=10
unipolarGains=1,2
unipolarGainsInt=1,2
SpecialBipolarGains=1
bipolarRange=5
bipolarGains=1,2
bipolarGainsInt=1,2
coupling=DC
ADCFIFO=128
diolines=16

[board14]
ConfigId=10144368
name=PC-TIO-10
bus=AT
device=9
diolines=16

[board15]
ConfigId=10519096
name=AT-AO-6
bus=AT
device=10
outputs=6
maxAOSR=300000
dacResolution=12
DACFIFO=1024
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board25]
ConfigId=10173736
name=AT-MIO-16E-2
bus=AT
device=24
adcResolution=12
settleTime=2
inputs=16
maxAISR=500000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=1
digitalTrig=1
unipolarRange=10
unipolarGains=0.5,1,2,5,10,20,50,100
unipolarGainsInt=-1,1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=0.5,1,2,5,10,20,50,100
bipolarGainsInt=-1,1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
outputs=2
maxAOSR=1e+006
dacResolution=12
DACFIFO=2048
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board26]
ConfigId=10532248
name=AT-AO-10
bus=AT
device=10
outputs=10
maxAOSR=300000
dacResolution=12
DACFIFO=1024
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board28]
ConfigId=10236160
name=Lab-PCPlus
bus=AT
device=4
adcResolution=12
settleTime=10
inputs=8
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7
DIInputIDs=0,2,4,6
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,5,10,20,50,100
unipolarGainsInt=1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=1,2,5,10,20,50,100
bipolarGainsInt=1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
outputs=2
maxAOSR=100000
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=5
diolines=24

[board30]
ConfigId=10512984
name=SCXI-1200
bus=Parallel Port
device=4
adcResolution=12
settleTime=10
inputs=8
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7
DIInputIDs=0,2,4,6
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,5,10,20,50,100
unipolarGainsInt=1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=1,2,5,10,20,50,100
bipolarGainsInt=1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
outputs=2
maxAOSR=1000
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=5
diolines=24

[board31]
ConfigId=10515024
name=DAQCard-700
bus=PCMCIA
device=8
adcResolution=12
settleTime=10
inputs=16
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=0
unipolarRange=
unipolarGains=
unipolarGainsInt=
SpecialBipolarGains=1
bipolarRange=10
bipolarGains=1,2,4
bipolarGainsInt=1,2,4
coupling=DC
ADCFIFO=512
diolines=16

[board32]
ConfigId=10841976
name=NEC-MIO-16E-4
bus=NEC
device=24
adcResolution=12
settleTime=4
inputs=16
maxAISR=250000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=1
digitalTrig=1
unipolarRange=10
unipolarGains=0.5,1,2,5,10,20,50,100
unipolarGainsInt=-1,1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=0.5,1,2,5,10,20,50,100
bipolarGainsInt=-1,1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
outputs=2
maxAOSR=1e+006
dacResolution=12
DACFIFO=2048
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board33]
ConfigId=10533256
name=DAQPad-1200
bus=Parallel Port
device=4
adcResolution=12
settleTime=10
inputs=8
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7
DIInputIDs=0,2,4,6
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,5,10,20,50,100
unipolarGainsInt=1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=1,2,5,10,20,50,100
bipolarGainsInt=1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
outputs=2
maxAOSR=1000
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=5
diolines=24

[board35]
ConfigId=10162296
name=DAQCard-DIO-24
bus=PCMCIA
device=3
diolines=24

[board36]
ConfigId=10194608
name=AT-MIO-16E-10
bus=AT
device=24
adcResolution=12
settleTime=10
inputs=16
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=0.5,1,2,5,10,20,50,100
unipolarGainsInt=-1,1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=0.5,1,2,5,10,20,50,100
bipolarGainsInt=-1,1,2,5,10,20,50,100
coupling=DC
ADCFIFO=512
outputs=2
maxAOSR=100000
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board37]
ConfigId=10190568
name=AT-MIO-16DE-10
bus=AT
device=24
adcResolution=12
settleTime=10
inputs=16
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=0.5,1,2,5,10,20,50,100
unipolarGainsInt=-1,1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=0.5,1,2,5,10,20,50,100
bipolarGainsInt=-1,1,2,5,10,20,50,100
coupling=DC
ADCFIFO=512
outputs=2
maxAOSR=100000
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=10
diolines=32

[board38]
ConfigId=10163304
name=AT-MIO-64E-3
bus=AT
device=24
adcResolution=12
settleTime=3.003
inputs=64
maxAISR=500000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63
DIInputIDs=0,1,2,3,4,5,6,7,16,17,18,19,20,21,22,23,32,33,34,35,36,37,38,39,48,49,50,51,52,53,54,55
scanning=1
analogTrig=1
digitalTrig=1
unipolarRange=10
unipolarGains=0.5,1,2,5,10,20,50,100
unipolarGainsInt=-1,1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=0.5,1,2,5,10,20,50,100
bipolarGainsInt=-1,1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
outputs=2
maxAOSR=1e+006
dacResolution=12
DACFIFO=2048
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board39]
ConfigId=10796424
name=AT-MIO-16XE-50
bus=AT
device=24
adcResolution=16
settleTime=50
inputs=16
maxAISR=20000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,10,100
unipolarGainsInt=1,2,10,100
bipolarRange=10
bipolarGains=1,2,10,100
bipolarGainsInt=1,2,10,100
coupling=DC
ADCFIFO=512
outputs=2
maxAOSR=20000
dacResolution=12
DACFIFO=0
dacUnipolarRange=0
dacBipolarRange=10
diolines=8

[board40]
ConfigId=10144704
name=NEC-AI-16E-4
bus=NEC
device=24
adcResolution=12
settleTime=4
inputs=16
maxAISR=250000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=1
digitalTrig=1
unipolarRange=10
unipolarGains=0.5,1,2,5,10,20,50,100
unipolarGainsInt=-1,1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=0.5,1,2,5,10,20,50,100
bipolarGainsInt=-1,1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
diolines=8

[board41]
ConfigId=10157168
name=NEC-MIO-16XE-50
bus=NEC
device=24
adcResolution=16
settleTime=50
inputs=16
maxAISR=20000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,10,100
unipolarGainsInt=1,2,10,100
bipolarRange=10
bipolarGains=1,2,10,100
bipolarGainsInt=1,2,10,100
coupling=DC
ADCFIFO=512
outputs=2
maxAOSR=20000
dacResolution=12
DACFIFO=0
dacUnipolarRange=0
dacBipolarRange=10
diolines=8

[board42]
ConfigId=10181128
name=NEC-AI-16XE-50
bus=NEC
device=24
adcResolution=16
settleTime=50
inputs=16
maxAISR=20000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,10,100
unipolarGainsInt=1,2,10,100
bipolarRange=10
bipolarGains=1,2,10,100
bipolarGainsInt=1,2,10,100
coupling=DC
ADCFIFO=512
diolines=8

[board43]
ConfigId=10183848
name=DAQPad-MIO-16XE-50
bus=Parallel Port
device=24
adcResolution=16
settleTime=50
inputs=16
maxAISR=20000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,10,100
unipolarGainsInt=1,2,10,100
bipolarRange=10
bipolarGains=1,2,10,100
bipolarGainsInt=1,2,10,100
coupling=DC
ADCFIFO=512
outputs=2
maxAOSR=20000
dacResolution=12
DACFIFO=0
dacUnipolarRange=0
dacBipolarRange=10
diolines=8

[board44]
ConfigId=10145712
name=AT-MIO-16E-1
bus=AT
device=24
adcResolution=12
settleTime=0.8
inputs=16
maxAISR=1.25e+006
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=1
digitalTrig=1
unipolarRange=10
unipolarGains=0.5,1,2,5,10,20,50,100
unipolarGainsInt=-1,1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=0.5,1,2,5,10,20,50,100
bipolarGainsInt=-1,1,2,5,10,20,50,100
coupling=DC
ADCFIFO=8192
outputs=2
maxAOSR=1e+006
dacResolution=12
DACFIFO=2048
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board45]
ConfigId=10501896
name=PC-OPDIO-16
bus=AT
device=3
diolines=16

[board46]
ConfigId=10561104
name=PC-AO-2DC
bus=AT
device=21
outputs=2
minSR=0
maxAOSR=0
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=5
diolines=16

[board47]
ConfigId=10854048
name=DAQCard-AO-2DC
bus=PCMCIA
device=21
outputs=2
minSR=0
maxAOSR=0
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=5
diolines=16

[board48]
ConfigId=10112640
name=DAQCard-1200
bus=PCMCIA
device=4
adcResolution=12
settleTime=10
inputs=8
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7
DIInputIDs=0,2,4,6
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,5,10,20,50,100
unipolarGainsInt=1,2,5,10,20,50,100
bipolarRange=5
bipolarGains=1,2,5,10,20,50,100
bipolarGainsInt=1,2,5,10,20,50,100
coupling=DC
ADCFIFO=2048
outputs=2
maxAOSR=1000
dacResolution=12
DACFIFO=0
dacUnipolarRange=10
dacBipolarRange=5
diolines=24

[board49]
ConfigId=10167008
name=DAQCard-500
bus=PCMCIA
device=8
adcResolution=12
settleTime=20
inputs=8
maxAISR=50000
SEInputIDs=0,1,2,3,4,5,6,7
DIInputIDs=
scanning=1
analogTrig=0
digitalTrig=0
unipolarRange=
unipolarGains=
unipolarGainsInt=
bipolarRange=5
bipolarGains=1
bipolarGainsInt=1
coupling=DC
ADCFIFO=16
diolines=8

[board50]
ConfigId=10493008
name=AT-MIO-16XE-10
bus=AT
device=24
adcResolution=16
settleTime=10
inputs=16
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=1
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,5,10,20,50,100
unipolarGainsInt=1,2,5,10,20,50,100
bipolarRange=10
bipolarGains=1,2,5,10,20,50,100
bipolarGainsInt=1,2,5,10,20,50,100
coupling=DC
ADCFIFO=512
outputs=2
maxAOSR=100000
dacResolution=16
DACFIFO=2048
dacUnipolarRange=10
dacBipolarRange=10
diolines=8

[board51]
ConfigId=10826704
name=AT-AI-16XE-10
bus=AT
device=24
adcResolution=16
settleTime=10
inputs=16
maxAISR=100000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=1
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,5,10,20,50,100
unipolarGainsInt=1,2,5,10,20,50,100
bipolarRange=10
bipolarGains=1,2,5,10,20,50,100
bipolarGainsInt=1,2,5,10,20,50,100
coupling=DC
ADCFIFO=512
diolines=8

[board52]
ConfigId=10156832
name=DAQCard-AI-16XE-50
bus=PCMCIA
device=24
adcResolution=16
settleTime=50
inputs=16
maxAISR=200000
SEInputIDs=0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
DIInputIDs=0,1,2,3,4,5,6,7
scanning=1
analogTrig=0
digitalTrig=1
unipolarRange=10
unipolarGains=1,2,10,100
unipolarGainsInt=1,2,10,100
bipolarRange=10
bipolarGains=1,2,10,100
bipolarGainsInt=1,2,10,100
coupling=DC
ADCFIFO=1024
diolines=8

[board53]
ConfigId=10800800