📄 hwireless.asp.svn-base
字号:
<% do_hpagehead(); %> <title>Help - Wireless Settings</title> </head> <body> <div id="header"> <div class="logo"> </div> <div class="navig"><a href="index.asp">Index</a> | <a href="javascript:self.close();">Close</a></div> </div> <div id="content"> <h2>Wireless Settings</h2> <dl> <dt>Wireless Mode</dt> <dd>The wireless part of your router can run in different modes: <ul class="wide"> <li>AP mode – This is the default mode, also called Infrastructure mode. Your router acts as an central connection point, which wireless clients can connect to.</li> <li>Client mode – The radio interface is used to connect the internet-facing side of the router (i.e., the WAN) as a client to a remote accesspoint. NAT or routing are performed between WAN and LAN, like in "normal" gateway or router mode. Use this mode, e.g., if your internet connection is provided by a remote accesspoint, and you want to connect a subnet of your own to it. </li> <li>Client Bridged mode – The radio interface is used to connect the LAN side of the router to a remote accesspoint. The LAN and the remote AP will be in the same subnet (This is called a "bridge" between two network segments). The WAN side of the router is unused and can be disabled. Use this mode, e.g., to make the router act as a "WLAN adapter" for a device connected to one of its LAN ethernet ports.</li> <li>Ad-Hoc mode – This is for peer to peer wireless connections. Clients running in Ad-Hoc mode can connect to each other as required without involving central access points.</li> </ul><br /><br /> <div class="note"> <h4>Note</h4> <div>Note that <a href="HWDS.asp">WDS</a> is only available in AP mode.</div> </div> </dd> <dt>Wireless Network Mode</dt> <dd>If you have Wireless-G and 802.11b devices in your network, then keep the default setting, <i>Mixed</i>. If you have only Wireless-G devices, select <i>G-Only</i>. If you would like to limit your network to only 802.11b devices, then select <i>B-Only</i>. If you want to disable wireless networking, select <i>Disable</i>. Note that <i>B-Only</i> mode is not supported under WDS. </dd> <dt>Wireless Network Name (SSID)</dt> <dd>The SSID is the network name shared among all devices in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 alphanumeric characters, which may be any keyboard character. Make sure this setting is the same for all devices in your wireless network.<br /><br /> <div class="note"> <h4>Note</h4> <div>For added security, it is recommended to change the default SSID <tt>linksys</tt> to a unique name of your choice.</div> </div> </dd> <dt>Wireless Channel</dt> <dd>Select the appropriate channel from the list provided to correspond with your network settings (in North America between channel 1 and 11, in Europe 1 and 13, in Japan all 14 channels). All devices in your wireless network must use the same channel in order to function correctly. Try to avoid conflicts with other wireless networks by choosing a channel where the upper and lower three channels are not in use.</dd> <dt>Wireless SSID Broadcast</dt> <dd>When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the router. To broadcast the router SSID, keep the default setting, <i>Enable</i>. If you do not want to broadcast the router SSID, then select <i>Disable</i>.</dd> <dt>Sensitivity Range</dt> <dd>Adjusts the ack timing in Atheros typical way based on the maximum distance in meters <ul class="wide"> <li> 0 disables ack timing completely</li> <li> 1 - 999999 adjusts ack timing</li> </ul> </dd> <dd>Check all values and click <i>Save Settings</i> to save your settings. Click <i>Cancel Changes</i> to cancel your unsaved changes.</dd> </dl> </div> <div class="also"> <h4><% tran("share.seealso"); %></h4> <ul> <li><a href="HWPA.asp">Wireless Security</a></li> <li><a href="HWirelessAdvanced.asp">Advanced Wireless Settings</a></li> </ul> </div> </body></html>⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -