apr_file_io.h

apache的软件linux版本

/* Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef APR_FILE_IO_H
#define APR_FILE_IO_H

/**
 * @file apr_file_io.h
 * @brief APR File I/O Handling
 */

#include "apr.h"
#include "apr_pools.h"
#include "apr_time.h"
#include "apr_errno.h"
#include "apr_file_info.h"
#include "apr_inherit.h"

#define APR_WANT_STDIO          /**< for SEEK_* */
#define APR_WANT_IOVEC          /**< for apr_file_writev */
#include "apr_want.h"

#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */

/**
 * @defgroup apr_file_io File I/O Handling Functions
 * @ingroup APR 
 * @{
 */

/**
 * @defgroup apr_file_open_flags File Open Flags/Routines
 * @{
 */

/* Note to implementors: Values in the range 0x00100000--0x80000000
   are reserved for platform-specific values. */

#define APR_READ       0x00001     /**< Open the file for reading */
#define APR_WRITE      0x00002     /**< Open the file for writing */
#define APR_CREATE     0x00004     /**< Create the file if not there */
#define APR_APPEND     0x00008     /**< Append to the end of the file */
#define APR_TRUNCATE   0x00010     /**< Open the file and truncate to 0 length */
#define APR_BINARY     0x00020     /**< Open the file in binary mode */
#define APR_EXCL       0x00040     /**< Open should fail if APR_CREATE and file
                                        exists. */
#define APR_BUFFERED   0x00080     /**< Open the file for buffered I/O */
#define APR_DELONCLOSE 0x00100     /**< Delete the file after close */
#define APR_XTHREAD    0x00200     /**< Platform dependent tag to open the file
                                        for use across multiple threads */
#define APR_SHARELOCK  0x00400     /**< Platform dependent support for higher
                                        level locked read/write access to support
                                        writes across process/machines */
#define APR_FILE_NOCLEANUP 0x00800 /**< Do not register a cleanup when the file
                                        is opened */
#define APR_SENDFILE_ENABLED 0x01000 /**< Advisory flag that this file should
                                          support apr_sendfile operation */
#define APR_LARGEFILE   0x04000    /**< Platform dependent flag to enable large file
                                        support; WARNING see below. */

/** @warning The APR_LARGEFILE flag only has effect on some platforms
 * where sizeof(apr_off_t) == 4.  Where implemented, it allows opening
 * and writing to a file which exceeds the size which can be
 * represented by apr_off_t (2 gigabytes).  When a file's size does
 * exceed 2Gb, apr_file_info_get() will fail with an error on the
 * descriptor, likewise apr_stat()/apr_lstat() will fail on the
 * filename.  apr_dir_read() will fail with APR_INCOMPLETE on a
 * directory entry for a large file depending on the particular
 * APR_FINFO_* flags.  Generally, it is not recommended to use this
 * flag. */

/** @} */

/**
 * @defgroup apr_file_seek_flags File Seek Flags
 * @{
 */

/* flags for apr_file_seek */
/** Set the file position */
#define APR_SET SEEK_SET
/** Current */
#define APR_CUR SEEK_CUR
/** Go to end of file */
#define APR_END SEEK_END
/** @} */

/**
 * @defgroup apr_file_attrs_set_flags File Attribute Flags
 * @{
 */

/* flags for apr_file_attrs_set */
#define APR_FILE_ATTR_READONLY   0x01          /**< File is read-only */
#define APR_FILE_ATTR_EXECUTABLE 0x02          /**< File is executable */
#define APR_FILE_ATTR_HIDDEN     0x04          /**< File is hidden */
/** @} */

/** File attributes */
typedef apr_uint32_t apr_fileattrs_t;

/** should be same as whence type in lseek, POSIX defines this as int */
typedef int       apr_seek_where_t;

/**
 * Structure for referencing files.
 */
typedef struct apr_file_t         apr_file_t;

/* File lock types/flags */
/**
 * @defgroup apr_file_lock_types File Lock Types
 * @{
 */

#define APR_FLOCK_SHARED        1       /**< Shared lock. More than one process
                                           or thread can hold a shared lock
                                           at any given time. Essentially,
                                           this is a "read lock", preventing
                                           writers from establishing an
                                           exclusive lock. */
#define APR_FLOCK_EXCLUSIVE     2       /**< Exclusive lock. Only one process
                                           may hold an exclusive lock at any
                                           given time. This is analogous to
                                           a "write lock". */

#define APR_FLOCK_TYPEMASK      0x000F  /**< mask to extract lock type */
#define APR_FLOCK_NONBLOCK      0x0010  /**< do not block while acquiring the
                                           file lock */
/** @} */

/**
 * Open the specified file.
 * @param newf The opened file descriptor.
 * @param fname The full path to the file (using / on all systems)
 * @param flag Or'ed value of:
 * <PRE>
 *         APR_READ              open for reading
 *         APR_WRITE             open for writing
 *         APR_CREATE            create the file if not there
 *         APR_APPEND            file ptr is set to end prior to all writes
 *         APR_TRUNCATE          set length to zero if file exists
 *         APR_BINARY            not a text file (This flag is ignored on 
 *                               UNIX because it has no meaning)
 *         APR_BUFFERED          buffer the data.  Default is non-buffered
 *         APR_EXCL              return error if APR_CREATE and file exists
 *         APR_DELONCLOSE        delete the file after closing.
 *         APR_XTHREAD           Platform dependent tag to open the file
 *                               for use across multiple threads
 *         APR_SHARELOCK         Platform dependent support for higher
 *                               level locked read/write access to support
 *                               writes across process/machines
 *         APR_FILE_NOCLEANUP    Do not register a cleanup with the pool 
 *                               passed in on the <EM>cont</EM> argument (see below).
 *                               The apr_os_file_t handle in apr_file_t will not
 *                               be closed when the pool is destroyed.
 *         APR_SENDFILE_ENABLED  Open with appropriate platform semantics
 *                               for sendfile operations.  Advisory only,
 *                               apr_sendfile does not check this flag.
 * </PRE>
 * @param perm Access permissions for file.
 * @param pool The pool to use.
 * @remark If perm is APR_OS_DEFAULT and the file is being created, appropriate 
 *      default permissions will be used.  *arg1 must point to a valid file_t, 
 *      or NULL (in which case it will be allocated)
 */
APR_DECLARE(apr_status_t) apr_file_open(apr_file_t **newf, const char *fname,
                                   apr_int32_t flag, apr_fileperms_t perm,
                                   apr_pool_t *pool);

/**
 * Close the specified file.
 * @param file The file descriptor to close.
 */
APR_DECLARE(apr_status_t) apr_file_close(apr_file_t *file);

/**
 * delete the specified file.
 * @param path The full path to the file (using / on all systems)
 * @param cont The pool to use.
 * @remark If the file is open, it won't be removed until all instances are closed.
 */
APR_DECLARE(apr_status_t) apr_file_remove(const char *path, apr_pool_t *cont);

/**
 * rename the specified file.
 * @param from_path The full path to the original file (using / on all systems)
 * @param to_path The full path to the new file (using / on all systems)
 * @param pool The pool to use.
 * @warning If a file exists at the new location, then it will be overwritten.  
 *      Moving files or directories across devices may not be possible.
 */
APR_DECLARE(apr_status_t) apr_file_rename(const char *from_path, 
                                          const char *to_path,
                                          apr_pool_t *pool);

/**
 * copy the specified file to another file.
 * @param from_path The full path to the original file (using / on all systems)
 * @param to_path The full path to the new file (using / on all systems)
 * @param perms Access permissions for the new file if it is created.
 *     In place of the usual or'd combination of file permissions, the
 *     value APR_FILE_SOURCE_PERMS may be given, in which case the source
 *     file's permissions are copied.
 * @param pool The pool to use.
 * @remark The new file does not need to exist, it will be created if required.
 * @warning If the new file already exists, its contents will be overwritten.
 */
APR_DECLARE(apr_status_t) apr_file_copy(const char *from_path, 
                                        const char *to_path,
                                        apr_fileperms_t perms,
                                        apr_pool_t *pool);

/**
 * append the specified file to another file.
 * @param from_path The full path to the source file (using / on all systems)
 * @param to_path The full path to the destination file (using / on all systems)
 * @param perms Access permissions for the destination file if it is created.
 *     In place of the usual or'd combination of file permissions, the
 *     value APR_FILE_SOURCE_PERMS may be given, in which case the source
 *     file's permissions are copied.
 * @param pool The pool to use.
 * @remark The new file does not need to exist, it will be created if required.
 */
APR_DECLARE(apr_status_t) apr_file_append(const char *from_path, 
                                          const char *to_path,
                                          apr_fileperms_t perms,
                                          apr_pool_t *pool);

/**
 * Are we at the end of the file
 * @param fptr The apr file we are testing.
 * @remark Returns APR_EOF if we are at the end of file, APR_SUCCESS otherwise.
 */
APR_DECLARE(apr_status_t) apr_file_eof(apr_file_t *fptr);

/**
 * open standard error as an apr file pointer.
 * @param thefile The apr file to use as stderr.
 * @param cont The pool to allocate the file out of.
 *