cnt10.fit.qmsg

led 跑马灯

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 6.0 Build 202 06/20/2006 Service Pack 1 SJ Full Version " "Info: Version 6.0 Build 202 06/20/2006 Service Pack 1 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Sun Apr 27 12:25:46 2008 " "Info: Processing started: Sun Apr 27 12:25:46 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off cnt10 -c cnt10 " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off cnt10 -c cnt10" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "cnt10 EP1C3T144C8 " "Info: Selected device EP1C3T144C8 for design \"cnt10\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP1C6T144C8 " "Info: Device EP1C6T144C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "ITAN_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Extra Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Performing register packing on registers with non-logic cell location assignments" 1 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Extra Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 1 0 "Completed register packing on registers with non-logic cell location assignments" 1 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "User Assigned Global Signals Promotion Operation " "Info: Completed User Assigned Global Signals Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFYGR_FYGR_GLOBAL_LINES_NEEDED_FOR_TORNADO_DQS" "0 " "Info: DQS I/O pins require 0 global routing resources" {  } {  } 0 0 "DQS I/O pins require %1!d! global routing resources" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "clk Global clock in PIN 93 " "Info: Automatically promoted signal \"clk\" to use Global clock in PIN 93" {  } { { "cnt10.vhd" "" { Text "E:/jasonx/cnt10/cnt10.vhd" 5 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_AUTO_GLOBAL_ASSIGNED_ALL_TO_GLOBAL" "clrn Global clock " "Info: Automatically promoted signal \"clrn\" to use Global clock" {  } { { "cnt10.vhd" "" { Text "E:/jasonx/cnt10/cnt10.vhd" 5 -1 0 } }  } 0 0 "Automatically promoted signal \"%1!s!\" to use %2!s!" 0 0}
{ "Info" "IFYGR_FYGR_PIN_USES_INTERNAL_GLOBAL" "clrn " "Info: Pin \"clrn\" drives global clock, but is not placed in a dedicated clock pin position" {  } { { "cnt10.vhd" "" { Text "E:/jasonx/cnt10/cnt10.vhd" 5 -1 0 } } { "e:/altera/quartus60/win/Assignment Editor.qase" "" { Assignment "e:/altera/quartus60/win/Assignment Editor.qase" 1 { { 0 "clrn" } } } } { "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { clrn } "NODE_NAME" } } { "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { clrn } "NODE_NAME" } }  } 0 0 "Pin \"%1!s!\" drives global clock, but is not placed in a dedicated clock pin position" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Global Promotion Operation " "Info: Completed Auto Global Promotion Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_FYGR_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Extra Info: Started Fast Input/Output/OE register processing" {  } {  } 1 0 "Started Fast Input/Output/OE register processing" 1 0}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Extra Info: Finished Fast Input/Output/OE register processing" {  } {  } 1 0 "Finished Fast Input/Output/OE register processing" 1 0}
{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0}
{ "Extra Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Extra Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 1 0 "Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" 1 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "0.925 ns register register " "Info: Estimated most critical path is register to register delay of 0.925 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns tmp\[0\] 1 REG LAB_X26_Y10 10 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X26_Y10; Fanout = 10; REG Node = 'tmp\[0\]'" {  } { { "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { tmp[0] } "NODE_NAME" } } { "cnt10.vhd" "" { Text "E:/jasonx/cnt10/cnt10.vhd" 14 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.616 ns) + CELL(0.309 ns) 0.925 ns tmp\[2\] 2 REG LAB_X26_Y10 8 " "Info: 2: + IC(0.616 ns) + CELL(0.309 ns) = 0.925 ns; Loc. = LAB_X26_Y10; Fanout = 8; REG Node = 'tmp\[2\]'" {  } { { "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "0.925 ns" { tmp[0] tmp[2] } "NODE_NAME" } } { "cnt10.vhd" "" { Text "E:/jasonx/cnt10/cnt10.vhd" 14 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "0.309 ns ( 33.41 % ) " "Info: Total cell delay = 0.309 ns ( 33.41 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "0.616 ns ( 66.59 % ) " "Info: Total interconnect delay = 0.616 ns ( 66.59 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "0.925 ns" { tmp[0] tmp[2] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Sun Apr 27 12:25:49 2008 " "Info: Processing ended: Sun Apr 27 12:25:49 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "E:/jasonx/cnt10/cnt10.fit.smsg " "Info: Generated suppressed messages file E:/jasonx/cnt10/cnt10.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}