usbpdiusbd12eval.h

vxworks 6.x 的全部头文件

/* usbPdiusbd12Eval.h - Definitions for Philips PDIUSBD12 eval board */

/* Copyright 1999-2004 Wind River Systems, Inc. */

/*
Modification history
--------------------
01d,02aug04,mta  Modification History Changes
01c,19jul04,ami  Coding Convention Changes
01b,15mar04,mta  defined structures for target and endpoint
01a,05aug99,rcb  First.
*/

/*
DESCRIPTION

Defines constants related to the Philips PDIUSBD12 evaluation board.
*/

#ifndef __INCusbPdiusbd12Evalh
#define __INCusbPdiusbd12Evalh

#ifdef	__cplusplus
extern "C" {
#endif

/* includes */

#include "drv/usb/target/usbPdiusbd12.h"    /* Philips PDIUSBD12 defn */
#include "usb/target/usbIsaLib.h"	    /* ISA bus functions */



/* defines */

#define EVAL_DEBUG                    /* For evaluation kit  */

/* evaluation board I/O address offsets */

#define D12EVAL_D12REG		0	/* base of PDIUSBD12 registers */
#define D12EVAL_GIN_REG		2	/* general input register */
#define D12EVAL_GOUT_REG	3	/* general output register */
				

/* default settings for I/O, IRQ, DMA */

#define D12EVAL_DEFAULT_IOBASE	0x368   /* default base I/O address */
#define D12EVAL_DEFAULT_IRQ	7	/* default IRQ channel */
#define D12EVAL_DEFAULT_DMA	3	/* default DMA channel */


/* general input port */

#define D12EVAL_GIN_S1		0x01    /* key S1, '0' for pressed */
#define D12EVAL_GIN_S2		0x02    /* key S2, '0' for pressed */
#define D12EVAL_GIN_S3		0x04    /* key S3, '0' for pressed */
#define D12EVAL_GIN_S4		0x08    /* key S4, '0' for pressed */
#define D12EVAL_GIN_GOODLINK	0x10    /* D12 GoodLink pin state */
#define D12EVAL_BUS_POWER	0x20    /* USB bus power state */
					/* '1' for USB VBUS present */
#define D12EVAL_SUSPEND		0x40    /* D12 SUSPEND pin state */
#define D12EVAL_INTN		0x80    /* D12 INT_N pin state */


/* general output port */

#define D12EVAL_GOUT_LED_D2	0x01    /* LED D2, '1' lights up LED */
#define D12EVAL_GOUT_LED_D3	0x02    /* LED D3, '1' lights up LED */
#define D12EVAL_GOUT_LED_D4	0x04    /* LED D4, '1' lights up LED */
#define D12EVAL_GOUT_LED_D5	0x08    /* LED D5, '1' lights up LED */
#define D12EVAL_GOUT_SUSPEND	0x40    /* suspend control */
					/* '1' forces D12 SUSPEND low */
#define D12EVAL_GOUT_INTENB	0x80    /* interrupt enable */
					/* '1' enables interrupt */

/* LEDs on PDIUSBD12 evaluation board used for debugging. */

#define ATTACH_LED	D12EVAL_GOUT_LED_D2	/* Attach LED */
#define ENABLE_LED	D12EVAL_GOUT_LED_D3	/* Enable LED */
#define INT_THREAD_LED	D12EVAL_GOUT_LED_D4	/* Interupt LED */

/* macros used to read/write PDIUSBD12 registers */

#define OUT_D12_CMD(pTarget,b)	\
    USB_ISA_BYTE_OUT (pTarget->ioBase + D12EVAL_D12REG + D12_CMD_REG, (b))
                                 /* Macro to write Command byte */

#define OUT_D12_DATA(pTarget,b) \
    USB_ISA_BYTE_OUT (pTarget->ioBase + D12EVAL_D12REG + D12_DATA_REG, (b))
                                 /* Macro to write Data byte */

#define IN_D12_DATA(pTarget)	\
    USB_ISA_BYTE_IN (pTarget->ioBase + D12EVAL_D12REG + D12_DATA_REG)
                                 /* Macro to read Data Byte */

/* macros used to read/write PDIUSBD12 eval general IN/OUT registers */

#define OUT_EVAL_GOUT(pTarget,b)    \
    USB_ISA_BYTE_OUT (pTarget->ioBase + D12EVAL_GOUT_REG, (b))
                                 /* Macro to write into eval kit register */

#define IN_EVAL_GIN(pTarget)	\
    USB_ISA_BYTE_IN (pTarget->ioBase + D12EVAL_GIN_REG)
                                 /* Macro to read from eval kit register */ 

#ifdef	__cplusplus
}
#endif

#endif	/* __INCusbPdiusbd12Evalh */