📄 bcables.htm
字号:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><!-- Tailoring the Cables --><HTML><HEAD><TITLE>Tailoring the Cables</TITLE><META HTTP-EQUIV="content-type" CONTENT="text/html; charset=iso-8859-1"></HEAD><BODY BACKGROUND="spiral.gif" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#990099" ALINK="#FF0000"><TABLE WIDTH="98%"><TR><TD WIDTH=60 VALIGN=BOTTOM NOWRAP><IMG SRC="transp.gif" ALT="" WIDTH=60 HEIGHT=20></TD><TD><!-- Ab hier Seitentext: --><BIG><BR><P><STRONG><U>II.3 Tailoring the Cables</U></STRONG></P><P>Application programs are uploaded to the target system over a serialinterface. The serial ports of the PC may have <NOBR>9-pin</NOBR> or<NOBR>25-pin</NOBR> male <NOBR>D-Shell</NOBR> connectors. Suitable<NOBR>RS-232</NOBR> cables for the <NOBR>MCS-51</NOBR> board can betailored as follows:</P></BIG><P><CENTER><IMG SRC="cable25s.gif" ALT="RS-232 cable with 25-pin female D-Shell connector" WIDTH=460 HEIGHT=230><BR>RS-232 cable with 25-pin female D-Shell connector</CENTER></P><BR><BIG><P>Shortening the modem control signals is absolutely required for batchoperation under <NOBR>MS-DOS</NOBR>! If the CTS-, DSR-, or DCD-input is notset to logic low <NOBR>(+12V)</NOBR>, the PC will hang during characteroutput to the serial port.<BR>For shell script operation under Linux, only the Tx-, Rx-, and groundlines are required, and the handshake inputs may be left open.The same is true for interactive operation with most terminal emulationprograms. (For further information refer to the documentation of yourterminal emulation program.)<BR>If there is a spare <NOBR>RS-232</NOBR> line receiver on your<NOBR>MCS-51</NOBR> board, it can be employed as a reset input! In thiscase, the target system can be reset in batch (or script) files with the<STRONG>reset</STRONG> program provided, and from terminal emulation programs(by dropping the DTR output with the <NOBR>hang-up</NOBR> function).</P></BIG><P><CENTER><IMG SRC="cable9s.gif" ALT="RS-232 cable with 9-pin female D-Shell connector" WIDTH=460 HEIGHT=230><BR>RS-232 cable with 9-pin female D-Shell connector</CENTER></P><BR><BIG><P>If you own a <NOBR>9/25-pin</NOBR> mouse adaptor with all pins connected,the <NOBR>9-pin</NOBR> version of the cable should be preferred!<BR>If your <NOBR>MCS-51</NOBR> board has no spare <NOBR>RS-232</NOBR> linereceivers, but a TTL reset input (or you can establish one), the targetsystem can also be reset in batch (or script) files over a printer port ofthe PC. For this, a suitable reset cable must be tailored as shown below:</P></BIG><P><CENTER><IMG SRC="cable25p.gif" ALT="Reset cable with 25-pin male D-Shell connector" WIDTH=460 HEIGHT=120><BR>Reset cable with 25-pin male D-Shell connector</CENTER></P><BR><BIG><P>In practice, only one of the two reset lines will be required.When the <STRONG>reset</STRONG> program is invoked, a positive reset pulse appearsat D0 (8031, 8032), and a negative pulse at D1 (80C535, 80C537).For detailed information on the <STRONG>reset</STRONG> program, refer to chapters<NOBR><A HREF="bbatch.htm">III.2 Batch File Operation under MS-DOS</A></NOBR>, and<NOBR><A HREF="bscript.htm">III.4 Shell Script Operation under Linux</A></NOBR>.</P></BIG><!-- Seitentext Ende --><P><BR><BR><CENTER><TABLE WIDTH="70%"><TR><TH><A HREF="boot51.htm"><IMG SRC="home.gif" ALT="[contents]" BORDER=0 WIDTH=32 HEIGHT=32></A></TH> <TH><A HREF="binstall.htm"><IMG SRC="up.gif" ALT="[up]" BORDER=0 WIDTH=32 HEIGHT=32></A></TH> <TH><A HREF="bcustom.htm"><IMG SRC="back.gif" ALT="[back]" BORDER=0 WIDTH=32 HEIGHT=32></A></TH> <TH><A HREF="bdesign.htm"><IMG SRC="next.gif" ALT="[next]" BORDER=0 WIDTH=32 HEIGHT=32></A></TH></TR></TABLE></CENTER></P></TD></TR></TABLE></BODY></HTML>⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -