fastica.m

关于FASTICA算法的完整应用程序

function [Out1, Out2, Out3] = fastica(mixedsig, varargin)
%FASTICA - Fast Independent Component Analysis
%
% FastICA for Matlab 5.x
% Version 2.1, January 15 2001
% Copyright (c) Hugo G鋠ert, Jarmo Hurri, Jaakko S鋜el? and Aapo Hyv鋜inen.
%
% FASTICA(mixedsig) estimates the independent components from given
% multidimensional signals. Each row of matrix mixedsig is one
% observed signal.  FASTICA uses Hyvarinen's fixed-point algorithm,
% see http://www.cis.hut.fi/projects/ica/fastica/. Output from the
% function depends on the number output arguments:
%
% [icasig] = FASTICA (mixedsig); the rows of icasig contain the
% estimated independent components.（icasig行包括估计独立分量）
%
% [icasig, A, W] = FASTICA (mixedsig); outputs the estimated separating
% matrix W and the corresponding mixing matrix A.输出估计分离矩阵和传输混合矩阵
%
% [A, W] = FASTICA (mixedsig); gives only the estimated mixing matrix
% A and the separating matrix W.
%
% Some optional arguments induce other output formats, see below.
%
% A graphical user interface for FASTICA can be launched by the
% command FASTICAG
%
% FASTICA can be called with numerous optional arguments. Optional
% arguments are given in parameter pairs, so that first argument is
% the name of the parameter and the next argument is the value for
% that parameter. Optional parameter pairs can be given in any order.
%
% OPTIONAL PARAMETERS:
%
% Parameter name        Values and description
%
%======================================================================
% --Basic parameters in fixed-point algorithm:
%
% 'approach'            (string) The decorrelation approach used. Can be
%                       symmetric ('symm'), i.e. estimate all the
%                       independent component in parallel, or
%                       deflation ('defl'), i.e. estimate independent
%                       component one-by-one like in projection pursuit.
%                       Default is 'defl'.
%
% 'numOfIC'             (integer) Number of independent components to
%                       be estimated. Default equals the dimension of data.
%
%======================================================================
% --Choosing the nonlinearity:
%
% 'g'                   (string) Chooses the nonlinearity g used in 
%                       the fixed-point algorithm. Possible values:
%
%                       Value of 'g':      Nonlinearity used:
%                       'pow3' (default)   g(u)=u^3
%                       'tanh'             g(u)=tanh(a1*u)
%                       'gauss             g(u)=u*exp(-a2*u^2/2)
%                       'skew'             g(u)=u^2
% 
% 'finetune'		(string) Chooses the nonlinearity g used when 
%                       fine-tuning. In addition to same values
%                       as for 'g', the possible value 'finetune' is:
%                       'off'              fine-tuning is disabled.
%
% 'a1'                  (number) Parameter a1 used when g='tanh'.
%                       Default is 1.
% 'a2'                  (number) Parameter a2 used when g='gaus'.
%                       Default is 1.
%
% 'mu'			(number) Step size. Default is 1.
%                       If the value of mu is other than 1, then the
%                       program will use the stabilized version of the
%                       algorithm (see also parameter 'stabilization').
%
%
% 'stabilization'       (string) Values 'on' or 'off'. Default 'off'. 
%                       This parameter controls wether the program uses
%                       the stabilized version of the algorithm or
%                       not. If the stabilization is on, then the value
%                       of mu can momentarily be halved if the program
%                       senses that the algorithm is stuck between two
%                       points (this is called a stroke). Also if there
%                       is no convergence before half of the maximum
%                       number of iterations has been reached then mu
%                       will be halved for the rest of the rounds.
% 
%======================================================================
% --Controlling convergence:
%
% 'epsilon'             (number) Stopping criterion. Default is 0.0001.
%
% 'maxNumIterations'    (integer) Maximum number of iterations.
%                       Default is 1000.
%
% 'maxFinetune'         (integer) Maximum number of iterations in 
%                       fine-tuning. Default 100.
%
% 'sampleSize'          (number) [0 - 1] Percentage of samples used in
%                       one iteration. Samples are chosen in random.
%                       Default is 1 (all samples).
%
% 'initGuess'           (matrix) Initial guess for A. Default is random.
%                       You can now do a "one more" like this: 
%                       [ica, A, W] = fastica(mix, 'numOfIC',3);
%                       [ica2, A2, W2] = fastica(mix, 'initGuess', A, 'numOfIC', 4);
%
%======================================================================
% --Graphics and text output:
%
% 'verbose'             (string) Either 'on' or 'off'. Default is
%                       'on': report progress of algorithm in text format.
%
% 'displayMode'         (string) Plot running estimates of independent
%                       components: 'signals', 'basis', 'filters' or
%                       'off'. Default is 'signals'.
%
% 'displayInterval'     Number of iterations between plots.
%                       Default is 1 (plot after every iteration).
%
%======================================================================
% --Controlling reduction of dimension and whitening:
%
% Reduction of dimension is controlled by 'firstEig' and 'lastEig', or
% alternatively by 'interactivePCA'. 
%
% 'firstEig'            (integer) This and 'lastEig' specify the range for
%                       eigenvalues that are retained, 'firstEig' is
%                       the index of largest eigenvalue to be
%                       retained. Default is 1.
%
% 'lastEig'             (integer) This is the index of the last (smallest)
%                       eigenvalue to be retained. Default equals the
%                       dimension of data.
%
% 'interactivePCA'      (string) Either 'on' or 'off'. When set 'on', the
%                       eigenvalues are shown to the user and the
%                       range can be specified interactively. Default
%                       is 'off'. Can also be set to 'gui'. Then the user
%                       can use the same GUI that's in FASTICAG.
%
% If you already know the eigenvalue decomposition of the covariance
% matrix, you can avoid computing it again by giving it with the
% following options:
%
% 'pcaE'                (matrix) Eigenvectors
% 'pcaD'                (matrix) Eigenvalues
%
% If you already know the whitened data, you can give it directly to
% the algorithm using the following options:
%
% 'whiteSig'            (matrix) Whitened signal
% 'whiteMat'            (matrix) Whitening matrix
% 'dewhiteMat'          (matrix) dewhitening matrix
%
% If values for all the 'whiteSig', 'whiteSig' and 'dewhiteMat' are
% suplied, they will be used in computing the ICA. PCA and whitening
% are not performed. Though 'mixedsig' is not used in the main
% algorithm it still must be entered - some values are still
% calculated from it.
%
% Performing preprocessing only is possible by the option:
%
% 'only'                (string) Compute only PCA i.e. reduction of
%                       dimension ('pca') or only PCA plus whitening
%                       ('white'). Default is 'all': do ICA estimation
%                       as well.  This option changes the output
%                       format accordingly. For example: 
%
%                       [whitesig, WM, DWM] = FASTICA(mixedsig, 
%                       'only', 'white') 
%                       returns the whitened signals, the whitening matrix
%                       (WM) and the dewhitening matrix (DWM). (See also
%                       WHITENV.) In FastICA the whitening matrix performs
%                       whitening and the reduction of dimension. Dewhitening
%                       matrix is the pseudoinverse of whitening matrix.
%                        
%                       [E, D] = FASTICA(mixedsig, 'only', 'pca') 
%                       returns the eigenvector (E) and diagonal 
%                       eigenvalue (D) matrices  containing the 
%                       selected subspaces. 
%
%======================================================================
% EXAMPLES
%
%       [icasig] = FASTICA (mixedsig, 'approach', 'symm', 'g', 'tanh');
%               Do ICA with tanh nonlinearity and in parallel (like
%               maximum likelihood estimation for supergaussian data).
%
%       [icasig] = FASTICA (mixedsig, 'lastEig', 10, 'numOfIC', 3);
%               Reduce dimension to 10, and estimate only 3
%               independent components.
%
%       [icasig] = FASTICA (mixedsig, 'verbose', 'off', 'displayMode', 'off');
%               Don't output convergence reports and don't plot
%               independent components.
%
%
% A graphical user interface for FASTICA can be launched by the
% command FASTICAG
%
%   See also FASTICAG

% 15.1.2001
% Hugo G鋠ert


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Remove the mean and check the data

[mixedsig, mixedmean] = remmean(mixedsig);

[Dim, NumOfSampl] = size(mixedsig);

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Default values for optional parameters

% All
verbose           = 'on';

% Default values for 'pcamat' parameters
firstEig          = 1;
lastEig           = Dim;
interactivePCA    = 'off';

% Default values for 'fpica' parameters
approach          = 'defl';
numOfIC           = Dim;
g                 = 'pow3';
finetune          = 'off';
a1                = 1;
a2                = 1;
myy               = 1;
stabilization     = 'off';
epsilon           = 0.0001;
maxNumIterations  = 1000;
maxFinetune       = 5;
initState         = 'rand';
guess             = 0;
sampleSize        = 1;
displayMode       = 'signals';
displayInterval   = 1;


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Parameters for fastICA - i.e. this file

b_verbose = 1;
jumpPCA = 0;