main.c

来自「本程序是针对Infineon公司的XC167CI处理器而编写的CAN网络程序。C」· C语言 代码 · 共 360 行

//****************************************************************************
// @Module        Project Settings
// @Filename      MAIN.C
// @Project       CANB.dav
//----------------------------------------------------------------------------
// @Controller    Infineon XC167CI-32F20
//
// @Compiler      Keil
//
// @Codegenerator 2.4
//
// @Description   This file contains the project initialization function.
//
//----------------------------------------------------------------------------
// @Date          2006-12-9 17:52:05
//
//****************************************************************************

// USER CODE BEGIN (MAIN_General,1)

// USER CODE END



//****************************************************************************
// @Project Includes
//****************************************************************************

#include "MAIN.H"

// USER CODE BEGIN (MAIN_General,2)

// USER CODE END


//****************************************************************************
// @Macros
//****************************************************************************

// USER CODE BEGIN (MAIN_General,3)

// USER CODE END


//****************************************************************************
// @Defines
//****************************************************************************

// USER CODE BEGIN (MAIN_General,4)

// USER CODE END


//****************************************************************************
// @Typedefs
//****************************************************************************

// USER CODE BEGIN (MAIN_General,5)

// USER CODE END


//****************************************************************************
// @Imported Global Variables
//****************************************************************************

// USER CODE BEGIN (MAIN_General,6)

// USER CODE END


//****************************************************************************
// @Global Variables
//****************************************************************************

// USER CODE BEGIN (MAIN_General,7)

// USER CODE END


//****************************************************************************
// @External Prototypes
//****************************************************************************

// USER CODE BEGIN (MAIN_General,8)

// USER CODE END


//****************************************************************************
// @Prototypes Of Local Functions
//****************************************************************************

// USER CODE BEGIN (MAIN_General,9)

// USER CODE END


//****************************************************************************
// @Function      void MAIN_vInit(void) 
//
//----------------------------------------------------------------------------
// @Description   This function initializes the microcontroller.
//
//----------------------------------------------------------------------------
// @Returnvalue   None
//
//----------------------------------------------------------------------------
// @Parameters    None
//
//----------------------------------------------------------------------------
// @Date          2006-12-9
//
//****************************************************************************

// USER CODE BEGIN (Init,1)

// USER CODE END

void MAIN_vInit(void)
{
  // USER CODE BEGIN (Init,2)

  // USER CODE END

  ///  -----------------------------------------------------------------------
  ///  Configuration of the System Clock:
  ///  -----------------------------------------------------------------------
  ///  - VCO clock used, input clock is connected
  ///  - input frequency is 8 MHz
  ///  - VCO output frequency 100 .. 150 MHz
  ///  - system clock is 20 MHz

  MAIN_vUnlockProtecReg();       // unlock write security
  PLLCON         =  0x7814;      // load PLL control register


  //// -----------------------------------------------------------------------
  //// Begin of Important Settings for the Start-Up File
  //// -----------------------------------------------------------------------
  ///  All following settings must be set in the start-up file. You can use 
  ///  DAvE's project file (*.dpt) to include this register values into your 
  ///  compiler EDE.

    ///  ---------------------------------------------------------------------
    ///  Initialization of the CPUCON1 Register:
    ///  ---------------------------------------------------------------------
    ///  - space between two vectors is 2 words
    ///  - DISWDT executable until End of Init
    ///  - segmentation is enabled
    ///  - switch context is interruptible
    ///  - branch prediction is enabled
    ///  - zero cycle jump function is enabled

    //// this register must be set in the start-up file
    //// CPUCON1  =  0x0007

    ///  ---------------------------------------------------------------------
    ///  Initialization of the VECSEG Register:
    ///  ---------------------------------------------------------------------
    ///  - start from internal program memory

    //// this register must be set in the start-up file
    //// VECSEG  =  0x00C0

    ///  ---------------------------------------------------------------------
    ///  Initialization of the SYSCON0 Register:
    ///  ---------------------------------------------------------------------

    //// this register must be set in the start-up file
    //// SYSCON0  =  0x0000

    ///  ---------------------------------------------------------------------
    ///  Initialization of the SYSCON1 Register:
    ///  ---------------------------------------------------------------------
    ///  clock prescaler for system is fpll / 1

    //// this register must be set in the start-up file
    //// SYSCON1  =  0x0000

    ///  ---------------------------------------------------------------------
    ///  Initialization of the SYSCON3 Register:
    ///  ---------------------------------------------------------------------

    //// this register must be set in the start-up file
    //// SYSCON3  =  0x0000

    ///  ---------------------------------------------------------------------
    ///  Initialization of EBC
    ///  ---------------------------------------------------------------------

    //// this register must be set in the start-up file
    //// EBCMOD1  =  0x007F

    ///  EBC is disabled
  //// -----------------------------------------------------------------------
  //// End of Important Settings for the Start-Up File
  //// -----------------------------------------------------------------------


  //   -----------------------------------------------------------------------
  //   Initialization of the Peripherals:
  //   -----------------------------------------------------------------------

  //   initializes the TwinCAN Module (CAN)
  CAN_vInit();

  // USER CODE BEGIN (Init,3)

  // USER CODE END

  //   globally enable interrupts
  PSW_IEN        =  1;          

} //  End of function MAIN_vInit


//****************************************************************************
// @Function      void MAIN_vUnlockProtecReg(void) 
//
//----------------------------------------------------------------------------
// @Description   This function makes it possible to write one protected 
//                register. After calling of this function and write on the 
//                protected register is the security level set to low 
//                protected mode.
//
//----------------------------------------------------------------------------
// @Returnvalue   None
//
//----------------------------------------------------------------------------
// @Parameters    None
//
//----------------------------------------------------------------------------
// @Date          2006-12-9
//
//****************************************************************************

// USER CODE BEGIN (UnlockProtecReg,1)

// USER CODE END

void MAIN_vUnlockProtecReg(void)
{
  ubyte ubPASSWORD;

  if((SCUSLS & 0x1800) == 0x0800)      // if low protected mode
  {

    ubPASSWORD = SCUSLS & 0x00FF;
    ubPASSWORD = ~ubPASSWORD;
    SCUSLC = 0x8E00 | ubPASSWORD;      // command 4

  }  // end if low protected mode

  if((SCUSLS & 0x1800) == 0x1800)      // if write protected mode
  {
    SCUSLC = 0xAAAA;                   // command 0
    SCUSLC = 0x5554;                   // command 1

    ubPASSWORD = SCUSLS & 0x00FF;
    ubPASSWORD = ~ubPASSWORD;

    SCUSLC = 0x9600 | ubPASSWORD;      // command 2
    SCUSLC = 0x0800;                   // command 3; new PASSWOR is 0x00

    ubPASSWORD = SCUSLS & 0x00FF;
    ubPASSWORD = ~ubPASSWORD;
    SCUSLC = 0x8E00 | ubPASSWORD;      // command 4

  }  // end if write protected mode

} //  End of function MAIN_vUnlockProtecReg


//****************************************************************************
// @Function      void main(void) 
//
//----------------------------------------------------------------------------
// @Description   This is the main function.
//
//----------------------------------------------------------------------------
// @Returnvalue   None
//
//----------------------------------------------------------------------------
// @Parameters    None
//
//----------------------------------------------------------------------------
// @Date          2006-12-9
//
//****************************************************************************

// USER CODE BEGIN (Main,1)
 ubyte ch[8]="hello";
 ubyte cha[8]="world";
  int k,m,n;
// USER CODE END

void main(void)
{
  // USER CODE BEGIN (Main,2)
    DP1L=0xff;
    P1L=0xff;
  // USER CODE END

  MAIN_vInit();

  // USER CODE BEGIN (Main,4)
  
	 
   	
 
 /*  for(k=0;k<100;k++)
   for(m=0;m<1000;m++)
   for(n=0;n<1000;n++)
	if(CAN_ubRequestMsgObj(1)) 
    {
  		CAN_vLoadData(1,cha);  
	  
		CAN_vTransmit(1);
	 
   	} */

  while(1)
  {
    // for(k=0;k<100;k++)
    // for(m=0;m<1000;m++)
   //  for(n=0;n<10000;n++) ;

	if(CAN_ubRequestMsgObj(1)) 
    {
  		CAN_vLoadData(1,ch);  
	  
		CAN_vTransmit(1); 
	}


	for(m=0;m<1000;m++)
    for(n=0;n<10000;n++)  ;

	if(CAN_ubRequestMsgObj(2)) 
    {
  		CAN_vLoadData(2,ch);  
	  
		CAN_vTransmit(2); 
	}

	for(m=0;m<1000;m++)
    for(n=0;n<10000;n++) ;
  }
  // USER CODE END

} //  End of function main



// USER CODE BEGIN (MAIN_General,10)

// USER CODE END