ansys.def

是一个很好的编辑器

[ESYM | Generates elements from a pattern by a symmetry reflection.]
ESYM,--,NINC,IEL1,IEL2,IEINC 
[ESYS | Sets the element coordinate system attribute pointer.]
ESYS,KCN 
[ET | Defines a local element type from the element library.]
ET,ITYPE,Ename,KOP1,KOP2,KOP3,KOP4,KOP5,KOP6,INOPR 
[ETABLE | Fills a table of element values for further processing.]
ETABLE,Lab,Item,Comp 
[ETDELE | Deletes element types.]
ETDELE,ITYP1,ITYP2,INC 
[ETCHG | Changes element types to their corresponding types.]
ETCHG,Cnv 
[ETLIST | Lists currently defined element types.]
ETLIST,ITYP1,ITYP2,INC 
[ETYPE |"Specifies""Element types""as the subsequent status topic."]
ETYPE 
[EUSORT | Restores original order of the element table.]
EUSORT 
[EWRITE | Writes elements to a file.]
EWRITE,Fname,Ext,--,KAPPND,Format 
[EXP | Forms the exponential of a variable.]
EXP,IR,IA,--,--,Name,--,--,FACTA,FACTB 
[EXPAND | Displays the results of a modal cyclic symmetry analysis.]
EXPAND,Nrepeat,MODAL,HIndex,Icsys,SctAng,--,Phase 
[EXPASS | Specifies an expansion pass of an analysis.]
EXPASS,Key 
[EXPSOL | Specifies the solution to be expanded for reduced analyses.]
EXPSOL,LSTEP,SBSTEP,TIMFRQ,Elcalc 
[EXTOPT | Controls options relating to the generation of volume elements from area elements.]
EXTOPT,Lab,Val1,Val2,Val3 
[EXTREM | Lists the extreme values for variables.]
EXTREM,NVAR1,NVAR2,NINC 
[F | Specifies force loads at nodes.]
F,NODE,Lab,VALUE,VALUE2,NEND,NINC 
[FATIGUE |"Specifies""Fatigue data status""as the subsequent status topic."]
FATIGUE 
[FC | Provides failure criteria information and activates a data table to input temperature dependent stress and strain limits.]
FC,MAT,Lab1,Lab2,DATA1-6 
[FCDELE | Deletes previously defined failure criterion data for the given material.]
FCDELE,MAT 
[FCCHECK | Checks both the strain and stress input criteria for all materials.]
FCCHECK 
[FCLIST | To list what the failure criteria is that you have input.]
FCLIST,MAT,,TEMP 
[FCUM | Specifies that force loads are to be accumulated.]
FCUM,Oper,RFACT,IFACT 
[FDELE | Deletes force loads on nodes.]
FDELE,NODE,Lab,NEND,NINC 
[FE | Defines a set of fatigue event parameters.]
FE,NEV,CYCLE,FACT,Title 
[FEBODY |"Specifies""Body loads on elements""as the subsequent status topic."]
FEBODY 
[FECONS |"Specifies""Constraints on nodes""as the subsequent status topic."]
FECONS 
[FEFOR |"Specifies""Forces on nodes""as the subsequent status topic."]
FEFOR 
[FELIST | Lists the fatigue event parameters.]
FELIST,NEV1,NEV2,NINC 
[FESURF |"Specifies""Surface loads on elements""as the subsequent status topic."]
FESURF 
[FILE | Specifies the data file where results are to be found.]
FILE,Fname,Ext,-- 
[FILEAUX2 | Specifies the binary file to be dumped.]
FILEAUX2,Fname,Ident,-- 
[FILEAUX3 | Specifies the results file to be edited.]
FILEAUX3,Fname,Ext,-- 
[FILEDISP | Specifies the file containing the graphics data.]
FILEDISP,Fname,Ext,-- 
[FILL | Generates a line of nodes between two existing nodes.]
FILL,NODE1,NODE2,NFILL,NSTRT,NINC,ITIME,INC,SPACE 
[FILLDATA | Fills a variable by a ramp function.]
FILLDATA,IR,LSTRT,LSTOP,LINC,VALUE,DVAL 
[FINISH | Exits normally from a processor.]
FINISH 
[FITEM | Identifies items chosen by a picking operation (GUI).]
FITEM,NFIELD,ITEM,ITEMY,ITEMZ 
[FK | Defines force loads at keypoints.]
FK,KPOI,Lab,VALUE,VALUE2 
[FKDELE | Deletes force loads at a keypoint.]
FKDELE,KPOI,Lab 
[FKLIST | Lists the forces at keypoints.]
FKLIST,KPOI,Lab 
[FL | Defines a set of fatigue location parameters.]
FL,NLOC,NODE,SCFX,SCFY,SCFZ,Title 
[FLANGE | Defines a flange in a piping run.]
FLANGE,NLOC,LENG,MASS,SIF,FLEX,ARINS,ELEM 
[FLDATA | Sets up a FLOTRAN analysis.]
FLDATA,Name,Label,Value 
[FLDATA1 | Controls which features of the solution algorithm are activated.]
FLDATA1,SOLU,Label,Value 
[FLDATA10 | Specifies the COF2 coefficient of the fluid property equation.]
FLDATA10,COF2,Label,Value 
[FLDATA11 | Specifies the COF3 coefficient of the fluid property equation.]
FLDATA11,COF3,Label,Value 
[FLDATA12 | Sets the property update frequency flag.]
FLDATA12,PROP,Label,Value 
[FLDATA13 | Sets the property variation flag.]
FLDATA13,VARY,Label,Value 
[FLDATA14 | Specifies the reference temperature.]
FLDATA14,TEMP,Label,Value 
[FLDATA15 | Specifies the reference pressure.]
FLDATA15,PRES,Label,Value 
[FLDATA16 | Specifies the bulk modulus parameter.]
FLDATA16,BULK,Label,Value 
[FLDATA17 | Specifies the specific heat ratio.]
FLDATA17,GAMM,Label,Value 
[FLDATA18 | Selects the algebraic solver.]
FLDATA18,METH,Label,Value 
[FLDATA19 | Specifies the number of TDMA sweeps.]
FLDATA19,TDMA,Label,Value 
[FLDATA2 | Sets iteration and output controls for steady state analyses.]
FLDATA2,ITER,Label,Value 
[FLDATA20 | Specifies the number of conjugate direction search vectors.]
FLDATA20,SRCH,Label,Value 
[FLDATA20A | Specifies the amount of fill in when preconditioning the coefficient matrix.]
FLDATA20A,PGMR,Label,Value 
[FLDATA20B | Specifies the number of fill ins for the ILU preconditioner.]
FLDATA20B,PBCGM,Label,Value 
[FLDATA21 | Specifies the convergence criterion for FLOTRAN algebraic solvers.]
FLDATA21,CONV,Label,Value 
[FLDATA22 | Specifies the maximum number of semi direct iterations.]
FLDATA22,MAXI,Label,Value 
[FLDATA23 | Specifies the solver minimum normalized rate of change.]
FLDATA23,DELT,Label,Value 
[FLDATA24 | Sets the turbulence model and the constants used in the Standard k epsilon Model and the Zero Equation Turbulence Model.]
FLDATA24,TURB,Label,Value 
[FLDATA24A | Sets constants for the Re Normalized Group Turbulence Model (RNG).]
FLDATA24A,RNGT,Label,Value 
[FLDATA24B | Sets constants for the k ? Turbulence Model due to Shih (NKE).]
FLDATA24B,NKET,Label,Value 
[FLDATA24C | Sets constants for the Nonlinear Turbulence Model of Girimaji (GIR).]
FLDATA24C,GIRT,Label,Value 
[FLDATA24D | Sets constants for the Shih,Zhu,Lumley Turbulence Model (SZL).]
FLDATA24D,SZLT,Label,Value 
[FLDATA25 | Sets solution and property relaxation factors.]
FLDATA25,RELX,Label,Value 
[FLDATA26 | Sets stability controls.]
FLDATA26,STAB,Label,Value 
[FLDATA27 | Controls dependent variable printing.]
FLDATA27,PRIN,Label,Value 
[FLDATA28 | Specifies that variable results are to be replaced.]
FLDATA28,MODR,Label,Value 
[FLDATA29 | Re initializes a results variable.]
FLDATA29,MODV,Label,Value 
[FLDATA3 | Sets the convergence monitors for the degree of freedom set.]
FLDATA3,TERM,Label,Value 
[FLDATA30 | Controls the quadrature orders.]
FLDATA30,QUAD,Label,Value 
[FLDATA31 | Specifies dependent variable caps.]
FLDATA31,CAPP,Label,Value 
[FLDATA32 | Controls restart options.]
FLDATA32,REST,Label,Value,Value2,Fname,Ext,-- 
[FLDATA33 | Specifies the approach to discretize the advection term.]
FLDATA33,ADVM,Label,Value 
[FLDATA34 | Sets modified inertial relaxation factors.]
FLDATA34,MIR,Label,Value 
[FLDATA35 | Specifies tolerances for the lower and upper bound of the volume fraction.]
FLDATA35,VFTOL,Label,Value 
[FLDATA36 | Specifies ambient reference values outside of the fluid for the volume of fluid (VOF) method.]
FLDATA36,AMBV,Label,Value 
[FLDATA37 | Specifies segregated solution or film coefficient algorithms.]
FLDATA37,ALGR,Label,Value 
[FLDATA38 | Specifies the mass type for a fluid transient analysis.]
FLDATA38,MASS,Label,Value 
[FLDATA4 | Sets controls for transient analyses based on transient time and convergence monitors or sets time integration method.]
FLDATA4,TIME,Label,Value 
[FLDATA4A | Sets controls for transient analyses based on the number of time steps.]
FLDATA4A,STEP,Label,Value 
[FLDATA5 | Sets output and storage controls.]
FLDATA5,OUTP,Label,Value 
[FLDATA6 | Controls the output of the convergence monitor.]
FLDATA6,CONV,Label,Value 
[FLDATA7 | Specifies the type of fluid property.]
FLDATA7,PROT,Label,Value 
[FLDATA8 | Specifies the NOMI coefficient of the fluid property equation.]
FLDATA8,NOMI,Label,Value 
[FLDATA9 | Specifies the COF1 coefficient of the fluid property equation.]
FLDATA9,COF1,Label,Value 
[FLIST | Lists force loads on the nodes.]
FLIST,NODE1,NODE2,NINC 
[FLLIST | Lists the fatigue location parameters.]
FLLIST,NLOC1,NLOC2,NINC 
[FLOCHECK | Sets up and runs a zero iteration FLOTRAN analysis.]
FLOCHECK,Key 
[FLOTRAN |"Specifies""FLOTRAN data settings""as the subsequent status topic."]
FLOTRAN 
[FLREAD | Reads the residual file written by the FLOTRAN CFD option.]
FLREAD,Fname,Ext,-- 
[FLST | Specifies data required for a picking operation (GUI).]
FLST,NFIELD,NARG,TYPE,Otype,LENG 
[FLUXV | Calculates the flux passing through a closed contour.]
FLUXV 
[FMAGBC | Applies force and torque boundary conditions to an element component.]
FMAGBC,Cnam1,Cnam2,Cnam3,Cnam4,Cnam5,Cnam6,Cnam7,Cnam8,Cnam9 
[FMAGSUM | Summarizes electromagnetic force calculations on element components.]
FMAGSUM,Cnam1,Cnam2,Cnam3,Cnam4,Cnam5,Cnam6,Cnam7,Cnam8,Cnam9 
[FOR2D | Calculates magnetic forces on a body.]
FOR2D 
[FORCE | Selects the element nodal force type for output.]
FORCE,Lab 
[FORM | Specifies the format of the file dump.]
FORM,Lab 
[FP | Defines the fatigue S vs. N and Sm vs. T tables.]
FP,STITM,C1,C2,C3,C4,C5,C6 
[FPLIST | Lists the property table stored for fatigue evaluation.]
FPLIST 
[FREQ | Defines the frequency points for the SV vs. FREQ tables.]
FREQ,FREQ1,FREQ2,FREQ3,FREQ4,FREQ5,FREQ6,FREQ7,FREQ8,FREQ9 
[FS | Stores fatigue stress components at a node.]
FS,NODE,NEV,NLOD,STITM,C1,C2,C3,C4,C5,C6 
[FSAN | Turns a fluid solid interaction analysis on or off.]
FSAN,Key 
[FSCALE | Scales force load values in the database.]
FSCALE,RFACT,IFACT 
[FSCO | Sets convergence values for a fluid solid interaction analysis.]
FSCO,Lab,VALUE 
[FSDELE | Deletes a stress condition for a fatigue location,event,and loading.]
FSDELE,NLOC,NEV,NLOD 
[FSDT | Sets time step increment for a fluid solid interaction analysis.]
FSDT,INC 
[FSIN | Specifies the interface load transfer option for a fluid solid interaction analysis.]
FSIN,Opt 
[FSIT | Sets the maximum number of stagger iterations for a fluid solid interaction analysis.]
FSIT,Val1 
[FSLIST | Lists the stresses stored for fatigue evaluation.]
FSLIST,NLOC1,NLOC2,NINC,NEV,NLOD 
[FSNODE | Calculates and stores the stress components at a node for fatigue.]
FSNODE,NODE,NEV,NLOD 
[FSOR | Specifies analysis order for a fluid solid interaction analysis.]
FSOR,First,Second 
[FSOU | Sets output frequency for a fluid solid interaction analysis.]
FSOU,Freq 
[FSPLOT | Displays a fatigue stress item for a fatigue location and event.]
FSPLOT,NLOC,NEV,ITEM 
[FSRE | Sets relaxation values for a fluid solid interaction analysis.]
FSRE,Lab,VALUE 
[FSRS | Specifies time or load step number for restart of a fluid structure interaction analysis.]
FSRS,Opt,VALUE 
[FSSECT | Calculates and stores total linearized stress components.]
FSSECT,RHO,NEV,NLOD,KBR 
[FSSOLV | Performs a coupled steady state fluid structural analysis.]
FSSOLV,Fluitit,Strutit,DIMN,Mcomp,Xcomp,FORCTOL,MOMETOL,STRUTOL,MXLOOP,FLUITER,RUSEKY,RESTKY 
[FSSTAT | Lists the settings for a fluid solid interaction analysis.]
FSSTAT 
[FSTI | Sets end time and load time for a fluid solid interaction analysis.]
FSTI,ENDTIME,LOADTIME 
[FSTR | Specifies static or transient analyses for a fluid solid interaction analysis.]
FSTR,Field,Type 
[FSUM | Sums the nodal force and moment contributions of elements.]
FSUM,LAB,ITEM 
[FTCALC | Performs fatigue calculations for a particular node location.]
FTCALC,NLOC,NODE 
[FTRAN | Transfers solid model forces to the finite element model.]
FTRAN 
[FTSIZE | Defines the fatigue data storage array.]
FTSIZE,MXLOC,MXEV,MXLOD 
[FTWRITE | Writes all currently stored fatigue data on a file.]
FTWRITE,Fname,Ext,-- 
[FVMESH | Generates nodes and tetrahedral volume elements from detached exterior area elements (facets).]
FVMESH,KEEP 
[GAP |"Specifies""Reduced transient gap conditions""as the subsequent status topic."]
GAP 
[GAPF | Defines the gap force data to be stored in a variable.]
GAPF,NVAR,NUM,Name 
[GAPFINISH | Exits from the CAD import topology repair stage.]
GAPFINISH 
[GAPLIST | Lists all joined or disjoined lines in a model (for models imported from CAD files).]
GAPLIST,Lab 
[GAPMERGE | Merges adjacent disjoined lines (for models imported from CAD files).]
GAPMERGE,Lab,VAL1,VAL2,VAL3 
[GAPOPT | Sets preferences for the CAD import repair commands.]
GAPOPT,Lab,Value 
[GAPPLOT | Plots all joined or disjoined lines (for models imported from CAD files).]
GAPPLOT,Lab 
[GAUGE | Gauges the problem domain for an edge element formulation.]
GAUGE,Opt 
[GCGEN | G