ansys.def

是一个很好的编辑器

[DDELE | Deletes degree of freedom constraints.]
DDELE,NODE,Lab,NEND,NINC 
[DDSOPT | Initializes the Distributed Domain Solver (DDS) settings.]
DDSOPT,Configopt,Ndomains,Max_Iter 
[DEACT |"Specifies""Element birth and death""as the subsequent status topic."]
DEACT 
[DECOMP | Specifies method by which mesh will be decomposed into domains]
DECOMP,DDS,Ndomains 
[DEFINE |"Specifies""Data definition settings""as the subsequent status topic."]
DEFINE 
[DELETE | Specifies sets in the results file to be deleted before postprocessing.]
DELETE,SET,Nstart,Nend 
[DELTIM | Specifies the time step sizes to be used for this load step.]
DELTIM,DTIME,DTMIN,DTMAX,Carry 
[DEMORPH | Move nodes in selected elements to conform to structural displacements.]
DEMORPH,ELEM,DIMN,RMSHKY 
[DERIV | Differentiates a variable.]
DERIV,IR,IY,IX,--,Name,--,--,FACTA 
[DESIZE | Controls default element sizes.]
DESIZE,MINL,MINH,MXEL,ANGL,ANGH,EDGMN,EDGMX,ADJF,ADJM 
[DESOL | Defines or modifies solution results at a node of an element.]
DESOL,ELEM,NODE,Item,Comp,V1,V2,V3,V4,V5,V6 
[DETAB | Modifies element table results in the database.]
DETAB,ELEM,Lab,V1,V2,V3,V4,V5,V6 
[DIG | Digitizes nodes to a surface.]
DIG,NODE1,NODE2,NINC 
[DIGIT |"Specifies""Node digitizing""as the subsequent status topic."]
DIGIT 
[DISPLAY |"Specifies""Display settings""as the subsequent status topic."]
DISPLAY 
[DK | Defines DOF constraints at keypoints.]
DK,KPOI,Lab,VALUE,VALUE2,KEXPND,Lab2,Lab3,Lab4,Lab5,Lab6 
[DKDELE | Deletes DOF constraints at a keypoint.]
DKDELE,KPOI,Lab 
[DKLIST | Lists the DOF constraints at keypoints.]
DKLIST,KPOI 
[DL | Defines DOF constraints on lines.]
DL,LINE,AREA,Lab,Value1,Value2 
[DLDELE | Deletes DOF constraints on a line.]
DLDELE,LINE,Lab 
[DLIST | Lists DOF constraints.]
DLIST,NODE1,NODE2,NINC 
[DLLIST | Lists DOF constraints on a line.]
DLLIST,LINE 
[DMOVE | Digitizes nodes on surfaces and along intersections.]
DMOVE,NODE1,NODE2,NINC 
[DMPRAT | Sets a constant damping ratio.]
DMPRAT,RATIO 
[DNSOL | Defines or modifies solution results at a node.]
DNSOL,NODE,Item,Comp,V1,V2,V3,V4,V5,V6 
[DOF | Adds degrees of freedom to the current DOF set.]
DOF,Lab1,Lab2,Lab3,Lab4,Lab5,Lab6,Lab7,Lab8,Lab9,Lab10 
[DOFSEL | Selects a DOF label set for reference by other commands.]
DOFSEL,Type,Dof1,Dof2,Dof3,Dof4,Dof5,Dof6 
[DOMEGA | Specifies the rotational acceleration of the structure.]
DOMEGA,DOMGX,DOMGY,DOMGZ 
[DSCALE | Scales DOF constraint values.]
DSCALE,RFACT,IFACT,TBASE 
[DSET | Sets the scale and drawing plane orientation for a digitizing tablet.]
DSET,NODE1,NODE2,NODE3,DDEV 
[DSUM | Specifies the double sum mode combination method.]
DSUM,SIGNIF,Label,TD 
[DSURF | Defines the surface upon which digitized nodes lie.]
DSURF,KCN,XSURF,YSURF,ZSURF 
[DSYM | Specifies symmetry or antisymmetry DOF constraints on nodes.]
DSYM,Lab,Normal,KCN 
[DSYS | Activates a display coordinate system for geometry listings and plots.]
DSYS,KCN 
[DTRAN | Transfers solid model DOF constraints to the finite element model.]
DTRAN 
[DUMP | Dumps the contents of a binary file.]
DUMP,NSTRT,NSTOP 
[DVMORPH | Move nodes in selected volumes to conform to structural displacements.]
DVMORPH,VOLU,XAREA,RMSHKY 
[DYNOPT |"Specifies""Dynamic analysis options""as the subsequent status topic."]
DYNOPT 
[E | Defines an element by node connectivity.]
E,I,J,K,L,M,N,O,P 
[EALIVE | Reactivates an element (for the birth and death capability).]
EALIVE,ELEM 
[EDADAPT | Activates adaptive meshing in an explicit dynamic analysis.]
EDADAPT,PART,Key 
[EDALE | Assigns mesh smoothing to explicit dynamic elements that use the ALE formulation.]
EDALE,Option,--,AFAC,BFAC,--,DFAC,EFAC,START,END 
[EDASMP | Creates a part assembly to be used in an explicit dynamic analysis.]
EDASMP,Option,ASMID,PART1,PART2,PART3,PART4,PART5,PART6,PART7,PART8,PART9,PART10,PART11,PART12,PART13,PART14,PART15,PART16 
[EDBOUND | Defines a boundary plane for sliding or cyclic symmetry.]
EDBOUND,Option,Lab,Cname,XC,YC,ZC,Cname2,COPT 
[EDBVIS | Specifies global bulk viscosity coefficients for an explicit dynamics analysis.]
EDBVIS,QVCO,LVCO 
[EDBX | Creates a box shaped volume to be used in a contact definition for explicit dynamics.]
EDBX,Option,BOXID,XMIN,XMAX,YMIN,YMAX,ZMIN,ZMAX 
[EDCADAPT | Specifies adaptive meshing controls for an explicit dynamic analysis.]
EDCADAPT,FREQ,TOL,OPT,MAXLVL,BTIME,DTIME,LCID,ADPSIZE,ADPASS,IREFLG,ADPENE,ADPTH,MAXEL 
[EDCGEN | Specifies contact parameters for an explicit dynamics analysis.]
EDCGEN,Option,Cont,Targ,FS,FD,DC,VC,VDC,V1,V2,V3,V4,BTIME,DTIME,BOXID1,BOXID2 
[EDCLIST | Lists contact entity specifications in an explicit dynamics analysis.]
EDCLIST,NUM 
[EDCMORE | Specifies additional contact parameters for a given contact definition in an explicit dynamic analysis.]
EDCMORE,Option,NUM,--,VAL1,VAL2 
[EDCNSTR | Defines various types of constraints for an explicit dynamic analysis.]
EDCNSTR,Option,Ctype,Comp1,Comp2,VAL1 
[EDCONTACT | Specifies contact surface controls for an explicit dynamics analysis.]
EDCONTACT,SFSI,RWPN,IPCK,SHTK,PENO,STCC,ORIE,CSPC,PENCHK 
[EDCPU | Specifies CPU time limit for an explicit dynamics analysis.]
EDCPU,CPUTIME 
[EDCRB | Constrains two rigid bodies to act as one in an explicit dynamics analysis.]
EDCRB,Option,NEQN,PARTM,PARTS 
[EDCSC | Specifies whether to use subcycling in an explicit dynamics analysis.]
EDCSC,Key 
[EDCTS | Specifies mass scaling and scale factor of computed time step for an explicit dynamics analysis.]
EDCTS,DTMS,TSSFAC 
[EDCURVE | Specifies data curves for an explicit dynamic analysis.]
EDCURVE,Option,LCID,Par1,Par2 
[EDDAMP | Defines mass weighted (Alpha) or stiffness weighted (Beta) damping for an explicit dynamics model.]
EDDAMP,PART,LCID,VALDMP 
[EDDBL | Selects a numerical precision type of the explicit dynamics analysis.]
EDDBL,KEY 
[EDDC | Deletes or deactivates/reactivates contact surface specifications in an explicit dynamic analysis.]
EDDC,Option,Ctype,Cont,Targ 
[EDDRELAX | Activates initialization to a prescribed geometry or dynamic relaxation for the explicit analysis.]
EDDRELAX,Option,NRCYCK,DRTOL,DFFCTR,DRTERM,TSSFDR,IRELAL,EDTTL 
[EDDUMP | Specifies output frequency for the explicit dynamic restart file (d3dump).]
EDDUMP,NUM,DT 
[EDELE | Deletes selected elements from the model.]
EDELE,IEL1,IEL2,INC 
[EDENERGY | Specifies energy dissipation controls for an explicit dynamics analysis.]
EDENERGY,HGEN,SWEN,SIEN,RLEN 
[EDFPLOT | Allows plotting of explicit dynamics forces and other load symbols.]
EDFPLOT,Key 
[EDGCALE | Defines global ALE controls for an explicit dynamic analysis.]
EDGCALE,NADV,METH 
[EDHGLS | Specifies the hourglass coefficient for an explicit dynamics analysis.]
EDHGLS,HGCO 
[EDHIST | Specifies time history output for an explicit dynamic analysis.]
EDHIST,Comp 
[EDHTIME | Specifies the time history output interval for an explicit dynamics analysis.]
EDHTIME,NSTEP,DT 
[EDINT | Specifies number of integration points for explicit shell and beam output.]
EDINT,SHELLIP,BEAMIP 
[EDIPART | Defines inertia for rigid parts in an explicit dynamics analysis.]
EDIPART,PART,Option,Cvect,TM,IRCS,Ivect,Vvect,CID 
[EDIS | Specifies stress initialization in an explicit dynamic full restart analysis.]
EDIS,Option,PIDN,PIDO 
[EDLCS | Defines a local coordinate system for use in explicit dynamics analysis.]
EDLCS,Option,CID,X1,Y1,Z1,X2,Y2,Z2,X3,Y3,Z3 
[EDLOAD | Specifies loads for an explicit dynamics analysis.]
EDLOAD,Option,Lab,KEY,Cname,Par1,Par2,PHASE,LCID,SCALE,BTIME,DTIME 
[EDMP | Defines material properties for an explicit dynamics analysis.]
EDMP,Lab,MAT,VAL1,VAL2,VAL3,VAL4,VAL5,VAL6 
[EDNB | Defines a nonreflecting boundary in an explicit dynamic analysis.]
EDNB,Option,Cname,AD,AS 
[EDNDTSD | Allows smoothing of noisy data for explicit dynamics analyses and provides a graphical representation of the data.]
EDNDTSD,Vect1,Vect2,DATAP,FITPT,Vect3,Vect4,DISP 
[EDNROT | Applies a rotated coordinate nodal constraint in an explicit dynamics analysis.]
EDNROT,Option,CID,Cname,DOF1,DOF2,DOF3,DOF4,DOF5,DOF6 
[EDOPT | Specifies the type of output for an explicit dynamics analysis.]
EDOPT,Option,--,Value 
[EDOUT | Specifies time history output (ASCII format) for an explicit dynamics analysis.]
EDOUT,Option 
[EDPART | Configures parts for an explicit dynamics analysis.]
EDPART,Option 
[EDPC | Selects and plots explicit dynamic contact entities.]
EDPC,MIN,MAX,INC 
[EDPL | Plots a time dependent load curve in an explicit dynamic analysis.]
EDPL,LDNUM 
[EDPVEL | Applies initial velocities to parts or part assemblies in an explicit dynamic analysis.]
EDPVEL,Option,PID,VX,VY,VZ,OMEGAX,OMEGAY,OMEGAZ,XC,YC,ZC,ANGX,ANGY,ANGZ 
[EDRC | Specifies rigid/deformable switch controls in an explicit dynamic analysis.]
EDRC,Option,NRBF,NCSF,--,DTMAX 
[EDRD | Switches a part from deformable to rigid or from rigid to deformable in an explicit dynamic analysis.]
EDRD,Option,PART,MRB 
[EDREAD | Reads explicit dynamics output into variables for time history postprocessing.]
EDREAD,NSTART,Label,NUM,STEP1,STEP2 
[EDRI | Defines inertia properties for a new rigid body that is created when a deformable part is switched to rigid in an explicit dynamic analysis.]
EDRI,Option,PART,XC,YC,ZC,TM,IXX,IYY,IZZ,IXY,IYZ,IXZ 
[EDRST | Specifies the output interval for an explicit dynamic analysis.]
EDRST,NSTEP,DT 
[EDRUN | Specify LS DYNA serial or parallel processing.]
EDRUN,Option,Cons 
[EDSHELL | Specifies shell computation controls for an explicit dynamics analysis.]
EDSHELL,WPAN,SHNU,SHTC,WPBT,SHPL,ITRST 
[EDSOLV |"Specifies""explicit dynamics solution""as the subsequent status topic."]
EDSOLV 
[EDSP | Specifies small penetration checking for contact entities in an explicit dynamic analysis.]
EDSP,Option,MIN,MAX,INC 
[EDSTART | Specifies status (new or restart) of an explicit dynamics analysis.]
EDSTART,RESTART,MEMORY,FSIZE,Dumpfile 
[EDTERM | Specifies termination criteria for an explicit dynamic analysis.]
EDTERM,Option,Lab,NUM,STOP,MAXC,MINC 
[EDTP | Plots explicit elements based on their time step size.]
EDTP,OPTION,VALUE1,VALUE2 
[EDVEL | Applies initial velocities to nodes or node components in an explicit dynamic analysis.]
EDVEL,Option,Cname,VX,VY,VZ,OMEGAX,OMEGAY,OMEGAZ,XC,YC,ZC,ANGX,ANGY,ANGZ 
[EDWELD | Defines a massless spotweld or generalized weld for use in an explicit dynamic analysis.]
EDWELD,Option,NWELD,N1,N2,SN,SS,EXPN,EXPS,EPSF,TFAIL,NSW,CID 
[EDWRITE | Writes explicit dynamics input to an LS DYNA input file.]
EDWRITE,Option,Fname,Ext,-- 
[EGEN | Generates elements from an existing pattern.]
EGEN,ITIME,NINC,IEL1,IEL2,IEINC,MINC,TINC,RINC,CINC,SINC,DX,DY,DZ 
[EINTF | Defines two noded elements between coincident or offset nodes.]
EINTF,TOLER,K,TLAB,KCN,DX,DY,DZ,KNONROT 
[EKILL | Deactivates an element (for the birth and death capability).]
EKILL,ELEM 
[ELEM |"Specifies""Elements""as the subsequent status topic."]
ELEM 
[ELIST | Lists the elements and their attributes.]
ELIST,IEL1,IEL2,INC,NNKEY,RKEY 
[EMAGERR | Calculates the relative error in an electrostatic or electromagnetic field analysis.]
EMAGERR 
[EMATWRITE | Forces the writing of all the element matrices to File.EMAT.]
EMATWRITE,Key 
[EMF | Calculates the electromotive force (emf),or voltage drop along a predefined path.]
EMF 
[EMID | Adds or removes midside nodes.]
EMID,Key,Edges 
[EMIS | Specifies emissivity as a material property for the Radiation Matrix method.]
EMIS,MAT,EVALU 
[EMODIF | Modifies a previously defined element.]
EMODIF,IEL,STLOC,I1,I2,I3,I4,I5,I6,I7,I8 
[EMORE | Adds more nodes to the just defined element.]
EMORE,Q,R,S,T,U,V,W,X 
[EMSYM | Specifies circular symmetry for electro magnetic sources.]
EMSYM,NSECT 
[EMTGEN | Generates a set of TRANS126 elements.]
EMTGEN,Ncomp,Ecomp,PNcomp,DOF,GAP,GAPMIN,FKN,Per0 
[EMUNIT | Specifies the system of units for magnetic field problems.]
EMUNIT,Lab,VALUE 
[EN | Defines an element by its number and node connectivity.]
EN,IEL,I,J,K,L,M,N,O,P 
[ENGEN | Generates elements from an existing pattern.]
ENGEN,IINC,ITIME,NINC,IEL1,IEL2,IEINC,MINC,TINC,RINC,CINC,SINC,DX,DY,DZ 
[ENORM | Reorients shell element normals.]
ENORM,ENUM 
[ENSYM | Generates elements by symmetry reflection.]
ENSYM,IINC,--,NINC,IEL1,IEL2,IEINC 
[EORIENT | Reorients solid element normals.]
EORIENT,Etype,Dir,TOLER 
[EPLOT | Produces an element display.]
EPLOT 
[EQSLV | Specifies the type of equation solver.]
EQSLV,Lab,TOLER,MULT 
[ERASE | Explicitly erases the current display.]
ERASE 
[EREAD | Reads elements from a file.]
EREAD,Fname,Ext,-- 
[EREFINE | Refines the mesh around specified elements.]
EREFINE,NE1,NE2,NINC,LEVEL,DEPTH,POST,RETAIN 
[ERESX | Specifies extrapolation of integration point results.]
ERESX,Key 
[ERNORM | Controls error estimation calculations.]
ERNORM,Key 
[ERRANG | Specifies the element range to be read from a file.]
ERRANG,EMIN,EMAX,EINC 
[ESEL | Selects a subset of elements.]
ESEL,Type,Item,Comp,VMIN,VMAX,VINC,KABS 
[ESCHECK | Perform element shape checking for a selected element set.]
ESCHECK,Sele,Levl,Defkey 
[ESIZE | Specifies the default number of line divisions.]
ESIZE,SIZE,NDIV 
[ESLA | Selects those elements associated with the selected areas.]
ESLA,Type 
[ESLL | Selects those elements associated with the selected lines.]
ESLL,Type 
[ESLN | Selects those elements attached to the selected nodes.]
ESLN,Type,EKEY,NodeType 
[ESLV | Selects elements associated with the selected volumes.]
ESLV,Type 
[ESOL | Specifies element data to be stored from the results file.]
ESOL,NVAR,ELEM,NODE,Item,Comp,Name 
[ESORT | Sorts the element table.]
ESORT,Item,Lab,ORDER,KABS,NUMB 
[ESSOLV | Performs a coupled electrostatic structural analysis.]
ESSOLV,Electit,Strutit,DIMN,MORPHOPT,Mcomp,Xcomp,ELECTOL,STRUTOL,MXLOOP,--,RUSEKY,RESTKY,EISCOMP 
[ESTIF | Specifies the matrix multiplier for deactivated elements.]
ESTIF,KMULT 
[ESURF | Generates elements overlaid on the free faces of existing selected elements.]
ESURF,XNODE,Tlab,Shape