dialup.conf

使用最广泛的radius的linux的源码

# -*- text -*-
##
## dialup.conf -- Oracle configuration for default schema (schema.sql)
##
##	$Id: dialup.conf,v 1.4 2008/04/30 08:33:39 aland Exp $

	#######################################################################
	#  Query config:  Username
	#######################################################################
	# This is the username that will get substituted, escaped, and added 
	# as attribute 'SQL-User-Name'.  '%{SQL-User-Name}' should be used below 
	# everywhere a username substitution is needed so you you can be sure 
	# the username passed from the client is escaped properly.  
	#
	#  Uncomment the next line, if you want the sql_user_name to mean:
	#
	#    Use Stripped-User-Name, if it's there.
	#    Else use User-Name, if it's there,
	#    Else use hard-coded string "DEFAULT" as the user name.
	#sql_user_name = "%{Stripped-User-Name:-%{User-Name:-DEFAULT}}"
	#
	sql_user_name = "%{User-Name}"

	#######################################################################
	#  Default profile
	#######################################################################
	# This is the default profile. It is found in SQL by group membership. 
	# That means that this profile must be a member of at least one group
	# which will contain the corresponding check and reply items.
	# This profile will be queried in the authorize section for every user.
	# The point is to assign all users a default profile without having to
	# manually add each one to a group that will contain the profile.
	# The SQL module will also honor the User-Profile attribute. This
	# attribute can be set anywhere in the authorize section (ie the users
	# file). It is found exactly as the default profile is found.
	# If it is set then it will *overwrite* the default profile setting.
	# The idea is to select profiles based on checks on the incoming packets,
	# not on user group membership. For example:
	# -- users file --
	# DEFAULT	Service-Type == Outbound-User, User-Profile := "outbound"
	# DEFAULT	Service-Type == Framed-User, User-Profile := "framed"
	#
	# By default the default_user_profile is not set
	#
	#default_user_profile = "DEFAULT"
	#
	# Determines if we will query the default_user_profile or the User-Profile
	# if the user is not found. If the profile is found then we consider the user
	# found. By default this is set to 'no'.
	# 
	#query_on_not_found = no


	#######################################################################
	#  Authorization Queries
	#######################################################################
	#  These queries compare the check items for the user
	#  in ${authcheck_table} and setup the reply items in 
	#  ${authreply_table}.  You can use any query/tables
	#  you want, but the return data for each row MUST 
	#  be in the  following order:
	#
	#  0. Row ID (currently unused)
	#  1. UserName/GroupName
	#  2. Item Attr Name
	#  3. Item Attr Value
	#  4. Item Attr Operation
	#######################################################################
	#
	# WARNING: Oracle is case sensitive
	#
	# The main difference between MySQL and Oracle queries is the date format.
	# You must use the TO_DATE function to transform the radius date format to
	# the Oracle date format, and put NULL otherwise '0' in a void date field.
	#
	#######################################################################

	authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM ${authcheck_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"
	authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM ${authreply_table} WHERE Username = '%{SQL-User-Name}' ORDER BY id"

	authorize_group_check_query = "SELECT ${groupcheck_table}.id,${groupcheck_table}.GroupName,${groupcheck_table}.Attribute,${groupcheck_table}.Value,${groupcheck_table}.op  FROM ${groupcheck_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupcheck_table}.GroupName ORDER BY ${groupcheck_table}.id"
	authorize_group_reply_query = "SELECT ${groupreply_table}.id,${groupreply_table}.GroupName,${groupreply_table}.Attribute,${groupreply_table}.Value,${groupreply_table}.op  FROM ${groupreply_table},${usergroup_table} WHERE ${usergroup_table}.Username = '%{SQL-User-Name}' AND ${usergroup_table}.GroupName = ${groupreply_table}.GroupName ORDER BY ${groupreply_table}.id"

	#######################################################################
	#  Accounting Queries
	#######################################################################
	# accounting_onoff_query	- query for Accounting On/Off packets 
	# accounting_update_query	- query for Accounting update packets 
	# accounting_update_query_alt	- query for Accounting update packets 
	#                               (alternate in case first query fails)
	# accounting_start_query	- query for Accounting start packets 
	# accounting_start_query_alt	- query for Accounting start packets 
	#                               (alternate in case first query fails)
	# accounting_stop_query		- query for Accounting stop packets 
	# accounting_stop_query_alt	- query for Accounting start packets 
	#                               (alternate in case first query doesn't
	#                                affect any existing rows in the table)
	#######################################################################
	accounting_onoff_query = "UPDATE ${acct_table1} SET AcctStopTime=TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime=((TO_DATE('%S','yyyy-mm-dd hh24:mi:ss') - AcctStartTime)*86400), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = %{Acct-Delay-Time:-0} WHERE AcctStopTime IS NULL AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= TO_DATE('%S','yyyy-mm-dd hh24:mi:ss')"

accounting_update_query = "UPDATE ${acct_table1} \
    SET FramedIPAddress = NULLIF('%{Framed-IP-Address}', ''), \
    AcctSessionTime = '%{Acct-Session-Time}', \
    AcctInputOctets = '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
    AcctOutputOctets = '%{Acct-Output-Octets}' +  ('%{Acct-Output-Gigawords}' * 4294967296) \
    WHERE \
    AcctSessionId = '%{Acct-Session-Id}' AND \
    UserName = '%{SQL-User-Name}' AND \
    NASIPAddress= '%{NAS-IP-Address}' AND \
    AcctStopTime IS NULL" 

accounting_update_query_alt = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, XAscendSessionSvrKey) \
    VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', \
    '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', \
    '%{NAS-Port-Type}', NULL, '%{Acct-Session-Time}', '%{Acct-Authentic}', '', \
    '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
    '%{Acct-Output-Octets}' +  ('%{Acct-Output-Gigawords}' * 4294967296), \
    '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', \
    '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"

        accounting_start_query = "INSERT into ${acct_table1} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey) \
 VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%{X-Ascend-Session-Svr-Key}')"

	accounting_start_query_alt  = "UPDATE ${acct_table1} SET AcctStartTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctStartDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"

	accounting_stop_query = "UPDATE ${acct_table2} \
    SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \
    AcctSessionTime = '%{Acct-Session-Time}', \
    AcctInputOctets = '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
    AcctOutputOctets = '%{Acct-Output-Octets}' +  ('%{Acct-Output-Gigawords}' * 4294967296), \
    AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time:-0}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL"

	# Optional Query - pnixon
	#accounting_stop_query =3D "UPDATE ${acct_table2} SET AcctStopTime = TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), AcctSessionTime = (substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+7,2) + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+4,2)*60 + substr((sysdate-acctstarttime),instr((sysdate-acctstarttime),' ')+1,2)*3600 + trunc(to_number(substr((sysdate-acctstarttime),1,instr(sysdate-acctstarttime,' '))))*86400), AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId =3D '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime IS NULL" 

accounting_stop_query_alt = "INSERT into ${acct_table2} (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) \
    VALUES('', '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', \
    '%{NAS-IP-Address}', '%{NAS-Port-Id}', '%{NAS-Port-Type}', NULL, TO_DATE('%S','yyyy-mm-dd hh24:mi:ss'), \
    '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', \
    '%{Acct-Input-Octets}' + ('%{Acct-Input-Gigawords}' * 4294967296), \
    '%{Acct-Output-Octets}' +  ('%{Acct-Output-Gigawords}' * 4294967296), \
    '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', \
    '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time:-0}')"

	#######################################################################
	# Simultaneous Use Checking Queries
	#######################################################################
	# simul_count_query	- query for the number of current connections
	#			- If this is not defined, no simultaneouls use checking 
	#			- will be performed by this module instance
	# simul_verify_query	- query to return details of current connections for verification
	#			- Leave blank or commented out to disable verification step
	#			- Note that the returned field order should not be changed.
	#######################################################################

	# Uncomment simul_count_query to enable simultaneous use checking
	# simul_count_query = "SELECT COUNT(*) FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"
	simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM ${acct_table1} WHERE UserName='%{SQL-User-Name}' AND AcctStopTime IS NULL"

	#######################################################################
	# Group Membership Queries
	#######################################################################
	# group_membership_query	- Check user group membership
	#######################################################################

	group_membership_query = "SELECT GroupName FROM ${usergroup_table} WHERE UserName='%{SQL-User-Name}'"