📄 cnt25s.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 12/27/2007 13:23:58
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "cnt25s"
BEGIN
DEVICE = "EPF10K10LC84-3";
"CLK" : INPUT_PIN = 1 ;
"EN25" : INPUT_PIN = 2 ;
"DOUT25B0" : OUTPUT_PIN = 47 ;
"DOUT25B1" : OUTPUT_PIN = 21 ;
"DOUT25B2" : OUTPUT_PIN = 25 ;
"DOUT25B3" : OUTPUT_PIN = 23 ;
"DOUT25B4" : OUTPUT_PIN = 22 ;
"DOUT25B5" : OUTPUT_PIN = 67 ;
"DOUT25B6" : OUTPUT_PIN = 60 ;
"DOUT25B7" : OUTPUT_PIN = 7 ;
"DOUT25M0" : OUTPUT_PIN = 24 ;
"DOUT25M1" : OUTPUT_PIN = 64 ;
"DOUT25M2" : OUTPUT_PIN = 50 ;
"DOUT25M3" : OUTPUT_PIN = 65 ;
"DOUT25M4" : OUTPUT_PIN = 52 ;
"DOUT25M5" : OUTPUT_PIN = 66 ;
"DOUT25M6" : OUTPUT_PIN = 11 ;
"DOUT25M7" : OUTPUT_PIN = 16 ;
"|LPM_ADD_SUB:88|addcore:adder|:59" : LOCATION = LC2_B4 ;
"|LPM_ADD_SUB:88|addcore:adder|:63" : LOCATION = LC7_B10;
"|LPM_ADD_SUB:88|addcore:adder|:67" : LOCATION = LC4_B21;
":19" : LOCATION = LC8_B10; -- CNT5B4
":20" : LOCATION = LC6_B10; -- CNT5B3
":21" : LOCATION = LC3_B10; -- CNT5B2
":22" : LOCATION = LC2_B10; -- CNT5B1
":23" : LOCATION = LC1_B10; -- CNT5B0
":54" : LOCATION = LC4_B10;
"~54~1" : LOCATION = LC5_B10;
":1548" : LOCATION = LC5_B21;
":1562" : LOCATION = LC1_B17;
":1576" : LOCATION = LC1_B16;
"~1576~1" : LOCATION = LC7_B16;
":1590" : LOCATION = LC2_B2 ;
":1604" : LOCATION = LC1_B21;
":1618" : LOCATION = LC4_B17;
":1632" : LOCATION = LC3_B16;
":1646" : LOCATION = LC1_B4 ;
":1660" : LOCATION = LC2_B21;
":1674" : LOCATION = LC6_B17;
":1716" : LOCATION = LC3_B21;
"~1730~1" : LOCATION = LC4_B4 ;
"~1744~1" : LOCATION = LC7_B17;
"~1758~1" : LOCATION = LC3_B4 ;
":1772" : LOCATION = LC8_B21;
"~1786~1" : LOCATION = LC6_B4 ;
"~1800~1" : LOCATION = LC4_B16;
"~1814~1" : LOCATION = LC8_B4 ;
"~1814~2" : LOCATION = LC5_B4 ;
":1828" : LOCATION = LC6_B21;
"~1842~1" : LOCATION = LC8_B17;
":1856" : LOCATION = LC8_B16;
":1870" : LOCATION = LC7_B4 ;
":2029" : LOCATION = LC1_B19;
"~2029~1" : LOCATION = LC4_B19;
"~2089~1" : LOCATION = LC5_B17;
"~2089~2" : LOCATION = LC6_B24;
"~2089~3" : LOCATION = LC8_B24;
":2109" : LOCATION = LC2_B24;
":2137" : LOCATION = LC1_B23;
":2187" : LOCATION = LC3_B24;
":2209" : LOCATION = LC4_B13;
":2232" : LOCATION = LC2_B18;
"~2239~1" : LOCATION = LC3_B17;
"~2239~2" : LOCATION = LC4_B24;
"~2262~1" : LOCATION = LC3_B18;
":2263" : LOCATION = LC8_B18;
":2286" : LOCATION = LC8_B13;
":2304" : LOCATION = LC4_B20;
"~2304~1" : LOCATION = LC2_B17;
":2305" : LOCATION = LC5_B20;
":2316" : LOCATION = LC6_B20;
":2317" : LOCATION = LC7_B20;
"~2334~1" : LOCATION = LC2_B16;
"~2334~2" : LOCATION = LC3_B20;
"~2335~1" : LOCATION = LC8_B20;
":2343" : LOCATION = LC1_B20;
":2359" : LOCATION = LC6_B13;
":2373" : LOCATION = LC3_B13;
":2377" : LOCATION = LC1_B14;
":2383" : LOCATION = LC2_B14;
":2389" : LOCATION = LC3_B14;
":2395" : LOCATION = LC4_B14;
":2401" : LOCATION = LC6_B14;
":2407" : LOCATION = LC7_B14;
":2413" : LOCATION = LC8_B14;
":2419" : LOCATION = LC5_B14;
":2653" : LOCATION = LC3_B19;
"~2653~1" : LOCATION = LC5_B24;
"~2698~1" : LOCATION = LC5_B13;
":2731" : LOCATION = LC2_B19;
"~2733~1" : LOCATION = LC5_B16;
"~2733~2" : LOCATION = LC7_B19;
"~2733~3" : LOCATION = LC8_B19;
"~2775~1" : LOCATION = LC1_B18;
"~2775~2" : LOCATION = LC2_B23;
":2776" : LOCATION = LC6_B19;
"~2805~1" : LOCATION = LC2_B20;
":2811" : LOCATION = LC5_B19;
":2818" : LOCATION = LC1_B22;
"~2841~1" : LOCATION = LC4_B18;
":2848" : LOCATION = LC5_B18;
"~2871~1" : LOCATION = LC7_B24;
"~2871~2" : LOCATION = LC5_B22;
":2878" : LOCATION = LC6_B18;
"~2878~1" : LOCATION = LC6_B16;
":2889" : LOCATION = LC7_B18;
"~2913~1" : LOCATION = LC2_B13;
":2914" : LOCATION = LC2_B22;
":2926" : LOCATION = LC4_B22;
"~2926~1" : LOCATION = LC3_B22;
"~2943~1" : LOCATION = LC1_B24;
":2955" : LOCATION = LC6_B22;
":2956" : LOCATION = LC8_B22;
":2967" : LOCATION = LC7_B22;
"~2967~1" : LOCATION = LC1_B11;
":2988" : LOCATION = LC7_B13;
":2992" : LOCATION = LC1_B13;
":3006" : LOCATION = LC1_B15;
":3012" : LOCATION = LC2_B15;
":3018" : LOCATION = LC3_B15;
":3024" : LOCATION = LC4_B15;
":3030" : LOCATION = LC5_B15;
":3036" : LOCATION = LC7_B15;
":3042" : LOCATION = LC8_B15;
":3045" : LOCATION = LC6_B15;
END;
INTERNAL_INFO "cnt25s"
BEGIN
DEVICE = EPF10K10LC84-3;
OD4P1 : LORAX = "1:FB4->LC8_B10,->LC6_B10,->LC3_B10,->LC2_B10,->LC1_B10|";
OD1P2 : LORAX = "1:FB1|2:FH1R1,PA20R1C9->LC8_B10,->LC6_B10,->LC3_B10,->LC2_B10,->LC1_B10||";
LC2_B4 : LORAX = "1:|2:MSW1R1C3,G35R1,PA3R1C20->LC4_B21,->LC5_B21,->LC1_B21,->LC2_B21,->LC3_B21,->LC8_B21,->LC6_B21|,2:MSW2R1C2,HHL1R1,PA0R1C9->LC7_B10,->LC3_B10||";
LC4_B21 : LORAX = "1:MSW3R1C20,G30R1,PA16R1C9->LC8_B10|";
LC8_B10 : LORAX = "1:MSW7R1C9,G65R1|2:PA12R1C13->LC7_B14|,2:PA8R1C14->LC7_B15|,2:PA8R1C15->LC1_B16,->LC3_B16,->LC8_B16,->LC2_B16,->LC5_B16,->LC6_B16|,2:PA8R1C16->LC1_B17,->LC4_B17,->LC7_B17|,2:PA12R1C19->LC3_B20|,2:PA8R1C20->LC5_B21,->LC1_B21,->LC2_B21,->LC3_B21,->LC8_B21,->LC6_B21|,2:PA12R1C21->LC8_B22|,2:PA8R1C1->LC2_B2|,2:PA8R1C3->LC1_B4,->LC4_B4,->LC3_B4,->LC6_B4,->LC7_B4||";
LC6_B10 : LORAX = "1:MSW5R1C9,G83R1|2:PA2R1C15->LC7_B16|,2:PA2R1C16->LC7_B17,->LC8_B17|,2:PA2R1C20->LC4_B21,->LC5_B21,->LC1_B21,->LC2_B21,->LC3_B21,->LC8_B21,->LC6_B21|,2:PA2R1C3->LC4_B4,->LC3_B4,->LC6_B4,->LC8_B4||";
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -