📄 dmfe.txt
字号:
Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.This program is free software; you can redistribute it and/ormodify it under the terms of the GNU General Public Licenseas published by the Free Software Foundation; either version 2of the License, or (at your option) any later version.This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; without even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See theGNU General Public License for more details.This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If youdidn't compile this driver as a module, it will automatically load itself on boot and print aline similar to : dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)If you compiled this driver as a module, you have to load it on boot.You can load it with command : insmod dmfeThis way it will autodetect the device mode.This is the suggested way to load the module.Or you can passa mode= setting to module while loading, like : insmod dmfe mode=0 # Force 10M Half Duplex insmod dmfe mode=1 # Force 100M Half Duplex insmod dmfe mode=4 # Force 10M Full Duplex insmod dmfe mode=5 # Force 100M Full DuplexNext you should configure your network interface with a command similar to : ifconfig eth0 172.22.3.18 ^^^^^^^^^^^ Your IP AddressThen you may have to modify the default routing table with command : route add default eth0Now your ethernet card should be up and running.TODO:Implement pci_driver::suspend() and pci_driver::resume() power management methods.Check on 64 bit boxes.Check and fix on big endian boxes.Test and make sure PCI latency is now correct for all cases.Authors:Sten Wang <sten_wang@davicom.com.tw > : Original AuthorTobias Ringstrom <tori@unhappy.mine.nu> : Current MaintainerContributors:Marcelo Tosatti <marcelo@conectiva.com.br>Alan Cox <alan@redhat.com>Jeff Garzik <jgarzik@pobox.com>Vojtech Pavlik <vojtech@suse.cz>
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -