⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 snd-aoa-gpio-feature.c

📁 linux 内核源代码
💻 C
字号:
/* * Apple Onboard Audio feature call GPIO control * * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> * * GPL v2, can be found in COPYING. * * This file contains the GPIO control routines for  * direct (through feature calls) access to the GPIO * registers. */#include <asm/pmac_feature.h>#include <linux/interrupt.h>#include "../aoa.h"/* TODO: these are 20 global variables * that aren't used on most machines... * Move them into a dynamically allocated * structure and use that. *//* these are the GPIO numbers (register addresses as offsets into * the GPIO space) */static int headphone_mute_gpio;static int amp_mute_gpio;static int lineout_mute_gpio;static int hw_reset_gpio;static int lineout_detect_gpio;static int headphone_detect_gpio;static int linein_detect_gpio;/* see the SWITCH_GPIO macro */static int headphone_mute_gpio_activestate;static int amp_mute_gpio_activestate;static int lineout_mute_gpio_activestate;static int hw_reset_gpio_activestate;static int lineout_detect_gpio_activestate;static int headphone_detect_gpio_activestate;static int linein_detect_gpio_activestate;/* node pointers that we save when getting the GPIO number * to get the interrupt later */static struct device_node *lineout_detect_node;static struct device_node *linein_detect_node;static struct device_node *headphone_detect_node;static int lineout_detect_irq;static int linein_detect_irq;static int headphone_detect_irq;static struct device_node *get_gpio(char *name,				    char *altname,				    int *gpioptr,				    int *gpioactiveptr){	struct device_node *np, *gpio;	const u32 *reg;	const char *audio_gpio;	*gpioptr = -1;	/* check if we can get it the easy way ... */	np = of_find_node_by_name(NULL, name);	if (!np) {		/* some machines have only gpioX/extint-gpioX nodes,		 * and an audio-gpio property saying what it is ...		 * So what we have to do is enumerate all children		 * of the gpio node and check them all. */		gpio = of_find_node_by_name(NULL, "gpio");		if (!gpio)			return NULL;		while ((np = of_get_next_child(gpio, np))) {			audio_gpio = of_get_property(np, "audio-gpio", NULL);			if (!audio_gpio)				continue;			if (strcmp(audio_gpio, name) == 0)				break;			if (altname && (strcmp(audio_gpio, altname) == 0))				break;		}		/* still not found, assume not there */		if (!np)			return NULL;	}	reg = of_get_property(np, "reg", NULL);	if (!reg)		return NULL;	*gpioptr = *reg;	/* this is a hack, usually the GPIOs 'reg' property	 * should have the offset based from the GPIO space	 * which is at 0x50, but apparently not always... */	if (*gpioptr < 0x50)		*gpioptr += 0x50;	reg = of_get_property(np, "audio-gpio-active-state", NULL);	if (!reg)		/* Apple seems to default to 1, but		 * that doesn't seem right at least on most		 * machines. So until proven that the opposite		 * is necessary, we default to 0		 * (which, incidentally, snd-powermac also does...) */		*gpioactiveptr = 0;	else		*gpioactiveptr = *reg;	return np;}static void get_irq(struct device_node * np, int *irqptr){	if (np)		*irqptr = irq_of_parse_and_map(np, 0);	else		*irqptr = NO_IRQ;}/* 0x4 is outenable, 0x1 is out, thus 4 or 5 */#define SWITCH_GPIO(name, v, on)				\	(((v)&~1) | ((on)?					\			(name##_gpio_activestate==0?4:5):	\			(name##_gpio_activestate==0?5:4)))#define FTR_GPIO(name, bit)					\static void ftr_gpio_set_##name(struct gpio_runtime *rt, int on)\{								\	int v;							\								\	if (unlikely(!rt)) return;				\								\	if (name##_mute_gpio < 0)				\		return;						\								\	v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL,		\			      name##_mute_gpio,			\			      0);				\								\	/* muted = !on... */					\	v = SWITCH_GPIO(name##_mute, v, !on);			\								\	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL,		\			  name##_mute_gpio, v);			\								\	rt->implementation_private &= ~(1<<bit);		\	rt->implementation_private |= (!!on << bit);		\}								\static int ftr_gpio_get_##name(struct gpio_runtime *rt)		\{								\	if (unlikely(!rt)) return 0;				\	return (rt->implementation_private>>bit)&1;		\}FTR_GPIO(headphone, 0);FTR_GPIO(amp, 1);FTR_GPIO(lineout, 2);static void ftr_gpio_set_hw_reset(struct gpio_runtime *rt, int on){	int v;	if (unlikely(!rt)) return;	if (hw_reset_gpio < 0)		return;	v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL,			      hw_reset_gpio, 0);	v = SWITCH_GPIO(hw_reset, v, on);	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL,			  hw_reset_gpio, v);}static void ftr_gpio_all_amps_off(struct gpio_runtime *rt){	int saved;	if (unlikely(!rt)) return;	saved = rt->implementation_private;	ftr_gpio_set_headphone(rt, 0);	ftr_gpio_set_amp(rt, 0);	ftr_gpio_set_lineout(rt, 0);	rt->implementation_private = saved;}static void ftr_gpio_all_amps_restore(struct gpio_runtime *rt){	int s;	if (unlikely(!rt)) return;	s = rt->implementation_private;	ftr_gpio_set_headphone(rt, (s>>0)&1);	ftr_gpio_set_amp(rt, (s>>1)&1);	ftr_gpio_set_lineout(rt, (s>>2)&1);}static void ftr_handle_notify(struct work_struct *work){	struct gpio_notification *notif =		container_of(work, struct gpio_notification, work.work);	mutex_lock(&notif->mutex);	if (notif->notify)		notif->notify(notif->data);	mutex_unlock(&notif->mutex);}static void gpio_enable_dual_edge(int gpio){	int v;	if (gpio == -1)		return;	v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio, 0);	v |= 0x80; /* enable dual edge */	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio, v);}static void ftr_gpio_init(struct gpio_runtime *rt){	get_gpio("headphone-mute", NULL,		 &headphone_mute_gpio,		 &headphone_mute_gpio_activestate);	get_gpio("amp-mute", NULL,		 &amp_mute_gpio,		 &amp_mute_gpio_activestate);	get_gpio("lineout-mute", NULL,		 &lineout_mute_gpio,		 &lineout_mute_gpio_activestate);	get_gpio("hw-reset", "audio-hw-reset",		 &hw_reset_gpio,		 &hw_reset_gpio_activestate);	headphone_detect_node = get_gpio("headphone-detect", NULL,					 &headphone_detect_gpio,					 &headphone_detect_gpio_activestate);	/* go Apple, and thanks for giving these different names	 * across the board... */	lineout_detect_node = get_gpio("lineout-detect", "line-output-detect",				       &lineout_detect_gpio,				       &lineout_detect_gpio_activestate);	linein_detect_node = get_gpio("linein-detect", "line-input-detect",				      &linein_detect_gpio,				      &linein_detect_gpio_activestate);	gpio_enable_dual_edge(headphone_detect_gpio);	gpio_enable_dual_edge(lineout_detect_gpio);	gpio_enable_dual_edge(linein_detect_gpio);	get_irq(headphone_detect_node, &headphone_detect_irq);	get_irq(lineout_detect_node, &lineout_detect_irq);	get_irq(linein_detect_node, &linein_detect_irq);	ftr_gpio_all_amps_off(rt);	rt->implementation_private = 0;	INIT_DELAYED_WORK(&rt->headphone_notify.work, ftr_handle_notify);	INIT_DELAYED_WORK(&rt->line_in_notify.work, ftr_handle_notify);	INIT_DELAYED_WORK(&rt->line_out_notify.work, ftr_handle_notify);	mutex_init(&rt->headphone_notify.mutex);	mutex_init(&rt->line_in_notify.mutex);	mutex_init(&rt->line_out_notify.mutex);}static void ftr_gpio_exit(struct gpio_runtime *rt){	ftr_gpio_all_amps_off(rt);	rt->implementation_private = 0;	if (rt->headphone_notify.notify)		free_irq(headphone_detect_irq, &rt->headphone_notify);	if (rt->line_in_notify.gpio_private)		free_irq(linein_detect_irq, &rt->line_in_notify);	if (rt->line_out_notify.gpio_private)		free_irq(lineout_detect_irq, &rt->line_out_notify);	cancel_delayed_work(&rt->headphone_notify.work);	cancel_delayed_work(&rt->line_in_notify.work);	cancel_delayed_work(&rt->line_out_notify.work);	flush_scheduled_work();	mutex_destroy(&rt->headphone_notify.mutex);	mutex_destroy(&rt->line_in_notify.mutex);	mutex_destroy(&rt->line_out_notify.mutex);}static irqreturn_t ftr_handle_notify_irq(int xx, void *data){	struct gpio_notification *notif = data;	schedule_delayed_work(&notif->work, 0);	return IRQ_HANDLED;}static int ftr_set_notify(struct gpio_runtime *rt,			  enum notify_type type,			  notify_func_t notify,			  void *data){	struct gpio_notification *notif;	notify_func_t old;	int irq;	char *name;	int err = -EBUSY;	switch (type) {	case AOA_NOTIFY_HEADPHONE:		notif = &rt->headphone_notify;		name = "headphone-detect";		irq = headphone_detect_irq;		break;	case AOA_NOTIFY_LINE_IN:		notif = &rt->line_in_notify;		name = "linein-detect";		irq = linein_detect_irq;		break;	case AOA_NOTIFY_LINE_OUT:		notif = &rt->line_out_notify;		name = "lineout-detect";		irq = lineout_detect_irq;		break;	default:		return -EINVAL;	}	if (irq == NO_IRQ)		return -ENODEV;	mutex_lock(&notif->mutex);	old = notif->notify;	if (!old && !notify) {		err = 0;		goto out_unlock;	}	if (old && notify) {		if (old == notify && notif->data == data)			err = 0;		goto out_unlock;	}	if (old && !notify)		free_irq(irq, notif);	if (!old && notify) {		err = request_irq(irq, ftr_handle_notify_irq, 0, name, notif);		if (err)			goto out_unlock;	}	notif->notify = notify;	notif->data = data;	err = 0; out_unlock:	mutex_unlock(&notif->mutex);	return err;}static int ftr_get_detect(struct gpio_runtime *rt,			  enum notify_type type){	int gpio, ret, active;	switch (type) {	case AOA_NOTIFY_HEADPHONE:		gpio = headphone_detect_gpio;		active = headphone_detect_gpio_activestate;		break;	case AOA_NOTIFY_LINE_IN:		gpio = linein_detect_gpio;		active = linein_detect_gpio_activestate;		break;	case AOA_NOTIFY_LINE_OUT:		gpio = lineout_detect_gpio;		active = lineout_detect_gpio_activestate;		break;	default:		return -EINVAL;	}	if (gpio == -1)		return -ENODEV;	ret = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio, 0);	if (ret < 0)		return ret;	return ((ret >> 1) & 1) == active;}static struct gpio_methods methods = {	.init			= ftr_gpio_init,	.exit			= ftr_gpio_exit,	.all_amps_off		= ftr_gpio_all_amps_off,	.all_amps_restore	= ftr_gpio_all_amps_restore,	.set_headphone		= ftr_gpio_set_headphone,	.set_speakers		= ftr_gpio_set_amp,	.set_lineout		= ftr_gpio_set_lineout,	.set_hw_reset		= ftr_gpio_set_hw_reset,	.get_headphone		= ftr_gpio_get_headphone,	.get_speakers		= ftr_gpio_get_amp,	.get_lineout		= ftr_gpio_get_lineout,	.set_notify		= ftr_set_notify,	.get_detect		= ftr_get_detect,};struct gpio_methods *ftr_gpio_methods = &methods;EXPORT_SYMBOL_GPL(ftr_gpio_methods);

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -