📄 aaci.h
字号:
/* * linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */#ifndef AACI_H#define AACI_H/* * Control and status register offsets * P39. */#define AACI_CSCH1 0x000#define AACI_CSCH2 0x014#define AACI_CSCH3 0x028#define AACI_CSCH4 0x03c#define AACI_RXCR 0x000 /* 29 bits Control Rx FIFO */#define AACI_TXCR 0x004 /* 17 bits Control Tx FIFO */#define AACI_SR 0x008 /* 12 bits Status */#define AACI_ISR 0x00c /* 7 bits Int Status */#define AACI_IE 0x010 /* 7 bits Int Enable *//* * Other registers */#define AACI_SL1RX 0x050#define AACI_SL1TX 0x054#define AACI_SL2RX 0x058#define AACI_SL2TX 0x05c#define AACI_SL12RX 0x060#define AACI_SL12TX 0x064#define AACI_SLFR 0x068 /* slot flags */#define AACI_SLISTAT 0x06c /* slot interrupt status */#define AACI_SLIEN 0x070 /* slot interrupt enable */#define AACI_INTCLR 0x074 /* interrupt clear */#define AACI_MAINCR 0x078 /* main control */#define AACI_RESET 0x07c /* reset control */#define AACI_SYNC 0x080 /* sync control */#define AACI_ALLINTS 0x084 /* all fifo interrupt status */#define AACI_MAINFR 0x088 /* main flag register */#define AACI_DR1 0x090 /* data read/written fifo 1 */#define AACI_DR2 0x0b0 /* data read/written fifo 2 */#define AACI_DR3 0x0d0 /* data read/written fifo 3 */#define AACI_DR4 0x0f0 /* data read/written fifo 4 *//* * TX/RX fifo control register (CR). P48 */#define CR_FEN (1 << 16) /* fifo enable */#define CR_COMPACT (1 << 15) /* compact mode */#define CR_SZ16 (0 << 13) /* 16 bits */#define CR_SZ18 (1 << 13) /* 18 bits */#define CR_SZ20 (2 << 13) /* 20 bits */#define CR_SZ12 (3 << 13) /* 12 bits */#define CR_SL12 (1 << 12)#define CR_SL11 (1 << 11)#define CR_SL10 (1 << 10)#define CR_SL9 (1 << 9)#define CR_SL8 (1 << 8)#define CR_SL7 (1 << 7)#define CR_SL6 (1 << 6)#define CR_SL5 (1 << 5)#define CR_SL4 (1 << 4)#define CR_SL3 (1 << 3)#define CR_SL2 (1 << 2)#define CR_SL1 (1 << 1)#define CR_EN (1 << 0) /* transmit enable *//* * status register bits. P49 */#define SR_RXTOFE (1 << 11) /* rx timeout fifo empty */#define SR_TXTO (1 << 10) /* rx timeout fifo nonempty */#define SR_TXU (1 << 9) /* tx underrun */#define SR_RXO (1 << 8) /* rx overrun */#define SR_TXB (1 << 7) /* tx busy */#define SR_RXB (1 << 6) /* rx busy */#define SR_TXFF (1 << 5) /* tx fifo full */#define SR_RXFF (1 << 4) /* rx fifo full */#define SR_TXHE (1 << 3) /* tx fifo half empty */#define SR_RXHF (1 << 2) /* rx fifo half full */#define SR_TXFE (1 << 1) /* tx fifo empty */#define SR_RXFE (1 << 0) /* rx fifo empty *//* * interrupt status register bits. */#define ISR_RXTOFEINTR (1 << 6) /* rx fifo empty */#define ISR_URINTR (1 << 5) /* tx underflow */#define ISR_ORINTR (1 << 4) /* rx overflow */#define ISR_RXINTR (1 << 3) /* rx fifo */#define ISR_TXINTR (1 << 2) /* tx fifo intr */#define ISR_RXTOINTR (1 << 1) /* tx timeout */#define ISR_TXCINTR (1 << 0) /* tx complete *//* * interrupt enable register bits. */#define IE_RXTOIE (1 << 6)#define IE_URIE (1 << 5)#define IE_ORIE (1 << 4)#define IE_RXIE (1 << 3)#define IE_TXIE (1 << 2)#define IE_RXTIE (1 << 1)#define IE_TXCIE (1 << 0)/* * interrupt status. P51 */#define ISR_RXTOFE (1 << 6) /* rx timeout fifo empty */#define ISR_UR (1 << 5) /* tx fifo underrun */#define ISR_OR (1 << 4) /* rx fifo overrun */#define ISR_RX (1 << 3) /* rx interrupt status */#define ISR_TX (1 << 2) /* tx interrupt status */#define ISR_RXTO (1 << 1) /* rx timeout */#define ISR_TXC (1 << 0) /* tx complete *//* * interrupt enable. P52 */#define IE_RXTOFE (1 << 6) /* rx timeout fifo empty */#define IE_UR (1 << 5) /* tx fifo underrun */#define IE_OR (1 << 4) /* rx fifo overrun */#define IE_RX (1 << 3) /* rx interrupt status */#define IE_TX (1 << 2) /* tx interrupt status */#define IE_RXTO (1 << 1) /* rx timeout */#define IE_TXC (1 << 0) /* tx complete *//* * slot flag register bits. P56 */#define SLFR_RWIS (1 << 13) /* raw wake-up interrupt status */#define SLFR_RGPIOINTR (1 << 12) /* raw gpio interrupt */#define SLFR_12TXE (1 << 11) /* slot 12 tx empty */#define SLFR_12RXV (1 << 10) /* slot 12 rx valid */#define SLFR_2TXE (1 << 9) /* slot 2 tx empty */#define SLFR_2RXV (1 << 8) /* slot 2 rx valid */#define SLFR_1TXE (1 << 7) /* slot 1 tx empty */#define SLFR_1RXV (1 << 6) /* slot 1 rx valid */#define SLFR_12TXB (1 << 5) /* slot 12 tx busy */#define SLFR_12RXB (1 << 4) /* slot 12 rx busy */#define SLFR_2TXB (1 << 3) /* slot 2 tx busy */#define SLFR_2RXB (1 << 2) /* slot 2 rx busy */#define SLFR_1TXB (1 << 1) /* slot 1 tx busy */#define SLFR_1RXB (1 << 0) /* slot 1 rx busy *//* * Interrupt clear register. */#define ICLR_RXTOFEC4 (1 << 12)#define ICLR_RXTOFEC3 (1 << 11)#define ICLR_RXTOFEC2 (1 << 10)#define ICLR_RXTOFEC1 (1 << 9)#define ICLR_TXUEC4 (1 << 8)#define ICLR_TXUEC3 (1 << 7)#define ICLR_TXUEC2 (1 << 6)#define ICLR_TXUEC1 (1 << 5)#define ICLR_RXOEC4 (1 << 4)#define ICLR_RXOEC3 (1 << 3)#define ICLR_RXOEC2 (1 << 2)#define ICLR_RXOEC1 (1 << 1)#define ICLR_WISC (1 << 0)/* * Main control register bits. P62 */#define MAINCR_SCRA(x) ((x) << 10) /* secondary codec reg access */#define MAINCR_DMAEN (1 << 9) /* dma enable */#define MAINCR_SL12TXEN (1 << 8) /* slot 12 transmit enable */#define MAINCR_SL12RXEN (1 << 7) /* slot 12 receive enable */#define MAINCR_SL2TXEN (1 << 6) /* slot 2 transmit enable */#define MAINCR_SL2RXEN (1 << 5) /* slot 2 receive enable */#define MAINCR_SL1TXEN (1 << 4) /* slot 1 transmit enable */#define MAINCR_SL1RXEN (1 << 3) /* slot 1 receive enable */#define MAINCR_LPM (1 << 2) /* low power mode */#define MAINCR_LOOPBK (1 << 1) /* loopback */#define MAINCR_IE (1 << 0) /* aaci interface enable *//* * Reset register bits. P65 */#define RESET_NRST (1 << 0)/* * Sync register bits. P65 */#define SYNC_FORCE (1 << 0)/* * Main flag register bits. P66 */#define MAINFR_TXB (1 << 1) /* transmit busy */#define MAINFR_RXB (1 << 0) /* receive busy */struct aaci_runtime { void __iomem *base; void __iomem *fifo; struct ac97_pcm *pcm; int pcm_open; u32 cr; struct snd_pcm_substream *substream; /* * PIO support */ void *start; void *end; void *ptr; int bytes; unsigned int period; unsigned int fifosz;};struct aaci { struct amba_device *dev; struct snd_card *card; void __iomem *base; unsigned int fifosize; /* AC'97 */ struct mutex ac97_sem; struct snd_ac97_bus *ac97_bus; struct snd_ac97 *ac97; u32 maincr; spinlock_t lock; struct aaci_runtime playback; struct aaci_runtime capture; struct snd_pcm *pcm;};#define ACSTREAM_FRONT 0#define ACSTREAM_SURROUND 1#define ACSTREAM_LFE 2#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -