user.h

来自「linux 内核源代码」· C头文件 代码 · 共 742 行 · 第 1/2 页

 * 5.3.1.7 SCTP_PARTIAL_DELIVERY_EVENT
 *
 *   When a receiver is engaged in a partial delivery of a
 *   message this notification will be used to indicate
 *   various events.
 */
struct sctp_pdapi_event {
	__u16 pdapi_type;
	__u16 pdapi_flags;
	__u32 pdapi_length;
	__u32 pdapi_indication;
	sctp_assoc_t pdapi_assoc_id;
};

enum { SCTP_PARTIAL_DELIVERY_ABORTED=0, };

struct sctp_authkey_event {
	__u16 auth_type;
	__u16 auth_flags;
	__u32 auth_length;
	__u16 auth_keynumber;
	__u16 auth_altkeynumber;
	__u32 auth_indication;
	sctp_assoc_t auth_assoc_id;
};

enum { SCTP_AUTH_NEWKEY = 0, };


/*
 * Described in Section 7.3
 *   Ancillary Data and Notification Interest Options
 */
struct sctp_event_subscribe {
	__u8 sctp_data_io_event;
	__u8 sctp_association_event;
	__u8 sctp_address_event;
	__u8 sctp_send_failure_event;
	__u8 sctp_peer_error_event;
	__u8 sctp_shutdown_event;
	__u8 sctp_partial_delivery_event;
	__u8 sctp_adaptation_layer_event;
};

/*
 * 5.3.1 SCTP Notification Structure
 *
 *   The notification structure is defined as the union of all
 *   notification types.
 *
 */
union sctp_notification {
	struct {
		__u16 sn_type;             /* Notification type. */
		__u16 sn_flags;
		__u32 sn_length;
	} sn_header;
	struct sctp_assoc_change sn_assoc_change;
	struct sctp_paddr_change sn_paddr_change;
	struct sctp_remote_error sn_remote_error;
	struct sctp_send_failed sn_send_failed;
	struct sctp_shutdown_event sn_shutdown_event;
	struct sctp_adaptation_event sn_adaptation_event;
	struct sctp_pdapi_event sn_pdapi_event;
	struct sctp_authkey_event sn_authkey_event;
};

/* Section 5.3.1
 * All standard values for sn_type flags are greater than 2^15.
 * Values from 2^15 and down are reserved.
 */

enum sctp_sn_type {
	SCTP_SN_TYPE_BASE     = (1<<15),
	SCTP_ASSOC_CHANGE,
	SCTP_PEER_ADDR_CHANGE,
	SCTP_SEND_FAILED,
	SCTP_REMOTE_ERROR,
	SCTP_SHUTDOWN_EVENT,
	SCTP_PARTIAL_DELIVERY_EVENT,
	SCTP_ADAPTATION_INDICATION,
	SCTP_AUTHENTICATION_INDICATION,
};

/* Notification error codes used to fill up the error fields in some
 * notifications.
 * SCTP_PEER_ADDRESS_CHAGE 	: spc_error
 * SCTP_ASSOC_CHANGE		: sac_error
 * These names should be potentially included in the draft 04 of the SCTP
 * sockets API specification.
 */
typedef enum sctp_sn_error {
	SCTP_FAILED_THRESHOLD,
	SCTP_RECEIVED_SACK,
	SCTP_HEARTBEAT_SUCCESS,
	SCTP_RESPONSE_TO_USER_REQ,
	SCTP_INTERNAL_ERROR,
	SCTP_SHUTDOWN_GUARD_EXPIRES,
	SCTP_PEER_FAULTY,
} sctp_sn_error_t;

/*
 * 7.1.1 Retransmission Timeout Parameters (SCTP_RTOINFO)
 *
 *   The protocol parameters used to initialize and bound retransmission
 *   timeout (RTO) are tunable.  See [SCTP] for more information on how
 *   these parameters are used in RTO calculation. 
 */
struct sctp_rtoinfo {
	sctp_assoc_t	srto_assoc_id;
	__u32		srto_initial;
	__u32		srto_max;
	__u32		srto_min;
};

/*
 * 7.1.2 Association Parameters (SCTP_ASSOCINFO)
 *
 *   This option is used to both examine and set various association and
 *   endpoint parameters.
 */
struct sctp_assocparams {
	sctp_assoc_t	sasoc_assoc_id;
	__u16		sasoc_asocmaxrxt;
	__u16		sasoc_number_peer_destinations;
	__u32		sasoc_peer_rwnd;
	__u32		sasoc_local_rwnd;
	__u32		sasoc_cookie_life;
};

/*
 * 7.1.9 Set Peer Primary Address (SCTP_SET_PEER_PRIMARY_ADDR)
 *
 *  Requests that the peer mark the enclosed address as the association
 *  primary. The enclosed address must be one of the association's
 *  locally bound addresses. The following structure is used to make a
 *   set primary request:
 */
struct sctp_setpeerprim {
	sctp_assoc_t            sspp_assoc_id;
	struct sockaddr_storage sspp_addr;
} __attribute__((packed, aligned(4)));

/*
 * 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR)
 *
 *  Requests that the local SCTP stack use the enclosed peer address as
 *  the association primary. The enclosed address must be one of the
 *  association peer's addresses. The following structure is used to
 *  make a set peer primary request:
 */
struct sctp_prim {
	sctp_assoc_t            ssp_assoc_id;
	struct sockaddr_storage ssp_addr;
} __attribute__((packed, aligned(4)));

/*
 * 7.1.11 Set Adaptation Layer Indicator (SCTP_ADAPTATION_LAYER)
 *
 * Requests that the local endpoint set the specified Adaptation Layer
 * Indication parameter for all future INIT and INIT-ACK exchanges.
 */
struct sctp_setadaptation {
	__u32	ssb_adaptation_ind;
};

/*
 * 7.1.13 Peer Address Parameters  (SCTP_PEER_ADDR_PARAMS)
 *
 *   Applications can enable or disable heartbeats for any peer address
 *   of an association, modify an address's heartbeat interval, force a
 *   heartbeat to be sent immediately, and adjust the address's maximum
 *   number of retransmissions sent before an address is considered
 *   unreachable. The following structure is used to access and modify an
 *   address's parameters:
 */
enum  sctp_spp_flags {
	SPP_HB_ENABLE = 1<<0,		/*Enable heartbeats*/
	SPP_HB_DISABLE = 1<<1,		/*Disable heartbeats*/
	SPP_HB = SPP_HB_ENABLE | SPP_HB_DISABLE,
	SPP_HB_DEMAND = 1<<2,		/*Send heartbeat immediately*/
	SPP_PMTUD_ENABLE = 1<<3,	/*Enable PMTU discovery*/
	SPP_PMTUD_DISABLE = 1<<4,	/*Disable PMTU discovery*/
	SPP_PMTUD = SPP_PMTUD_ENABLE | SPP_PMTUD_DISABLE,
	SPP_SACKDELAY_ENABLE = 1<<5,	/*Enable SACK*/
	SPP_SACKDELAY_DISABLE = 1<<6,	/*Disable SACK*/
	SPP_SACKDELAY = SPP_SACKDELAY_ENABLE | SPP_SACKDELAY_DISABLE,
	SPP_HB_TIME_IS_ZERO = 1<<7,	/* Set HB delay to 0 */
};

struct sctp_paddrparams {
	sctp_assoc_t		spp_assoc_id;
	struct sockaddr_storage	spp_address;
	__u32			spp_hbinterval;
	__u16			spp_pathmaxrxt;
	__u32			spp_pathmtu;
	__u32			spp_sackdelay;
	__u32			spp_flags;
} __attribute__((packed, aligned(4)));

/*
 * 7.1.18.  Add a chunk that must be authenticated (SCTP_AUTH_CHUNK)
 *
 * This set option adds a chunk type that the user is requesting to be
 * received only in an authenticated way.  Changes to the list of chunks
 * will only effect future associations on the socket.
 */
struct sctp_authchunk {
	__u8		sauth_chunk;
};

/*
 * 7.1.19.  Get or set the list of supported HMAC Identifiers (SCTP_HMAC_IDENT)
 *
 * This option gets or sets the list of HMAC algorithms that the local
 * endpoint requires the peer to use.
*/
struct sctp_hmacalgo {
	__u16		shmac_num_idents;
	__u16		shmac_idents[];
};

/*
 * 7.1.20.  Set a shared key (SCTP_AUTH_KEY)
 *
 * This option will set a shared secret key which is used to build an
 * association shared key.
 */
struct sctp_authkey {
	sctp_assoc_t	sca_assoc_id;
	__u16		sca_keynumber;
	__u16		sca_keylen;
	__u8		sca_key[];
};

/*
 * 7.1.21.  Get or set the active shared key (SCTP_AUTH_ACTIVE_KEY)
 *
 * This option will get or set the active shared key to be used to build
 * the association shared key.
 */

struct sctp_authkeyid {
	sctp_assoc_t	scact_assoc_id;
	__u16		scact_keynumber;
};


/* 7.1.23. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME)
 *
 *   This options will get or set the delayed ack timer.  The time is set
 *   in milliseconds.  If the assoc_id is 0, then this sets or gets the
 *   endpoints default delayed ack timer value.  If the assoc_id field is
 *   non-zero, then the set or get effects the specified association.
 */
struct sctp_assoc_value {
    sctp_assoc_t            assoc_id;
    uint32_t                assoc_value;
};

/*
 * 7.2.2 Peer Address Information
 *
 *   Applications can retrieve information about a specific peer address
 *   of an association, including its reachability state, congestion
 *   window, and retransmission timer values.  This information is
 *   read-only. The following structure is used to access this
 *   information:
 */
struct sctp_paddrinfo {
	sctp_assoc_t		spinfo_assoc_id;
	struct sockaddr_storage	spinfo_address;
	__s32			spinfo_state;
	__u32			spinfo_cwnd;
	__u32			spinfo_srtt;
	__u32			spinfo_rto;
	__u32			spinfo_mtu;
} __attribute__((packed, aligned(4)));

/* Peer addresses's state. */
/* UNKNOWN: Peer address passed by the upper layer in sendmsg or connect[x]
 * calls.
 * UNCONFIRMED: Peer address received in INIT/INIT-ACK address parameters.
 *              Not yet confirmed by a heartbeat and not available for data
 *		transfers.
 * ACTIVE : Peer address confirmed, active and available for data transfers.
 * INACTIVE: Peer address inactive and not available for data transfers.
 */
enum sctp_spinfo_state {
	SCTP_INACTIVE,
	SCTP_ACTIVE,
	SCTP_UNCONFIRMED,
	SCTP_UNKNOWN = 0xffff  /* Value used for transport state unknown */
};

/*
 * 7.2.1 Association Status (SCTP_STATUS)
 *
 *   Applications can retrieve current status information about an
 *   association, including association state, peer receiver window size,
 *   number of unacked data chunks, and number of data chunks pending
 *   receipt.  This information is read-only.  The following structure is
 *   used to access this information:
 */
struct sctp_status {
	sctp_assoc_t		sstat_assoc_id;
	__s32			sstat_state;
	__u32			sstat_rwnd;
	__u16			sstat_unackdata;
	__u16			sstat_penddata;
	__u16			sstat_instrms;
	__u16			sstat_outstrms;
	__u32			sstat_fragmentation_point;
	struct sctp_paddrinfo	sstat_primary;
};

/*
 * 7.2.3.  Get the list of chunks the peer requires to be authenticated
 *         (SCTP_PEER_AUTH_CHUNKS)
 *
 * This option gets a list of chunks for a specified association that
 * the peer requires to be received authenticated only.
 */
struct sctp_authchunks {
	sctp_assoc_t            gauth_assoc_id;
	uint8_t                 gauth_chunks[];
};

/*
 * 8.3, 8.5 get all peer/local addresses in an association.
 * This parameter struct is used by SCTP_GET_PEER_ADDRS and 
 * SCTP_GET_LOCAL_ADDRS socket options used internally to implement
 * sctp_getpaddrs() and sctp_getladdrs() API. 
 */
struct sctp_getaddrs_old {
	sctp_assoc_t            assoc_id;
	int			addr_num;
	struct sockaddr		__user *addrs;
};
struct sctp_getaddrs {
	sctp_assoc_t		assoc_id; /*input*/
	__u32			addr_num; /*output*/
	__u8			addrs[0]; /*output, variable size*/
};

/* These are bit fields for msghdr->msg_flags.  See section 5.1.  */
/* On user space Linux, these live in <bits/socket.h> as an enum.  */
enum sctp_msg_flags {
	MSG_NOTIFICATION = 0x8000,
#define MSG_NOTIFICATION MSG_NOTIFICATION
};

/*
 * 8.1 sctp_bindx()
 *
 * The flags parameter is formed from the bitwise OR of zero or more of the
 * following currently defined flags:
 */
#define SCTP_BINDX_ADD_ADDR 0x01
#define SCTP_BINDX_REM_ADDR 0x02

/* This is the structure that is passed as an argument(optval) to
 * getsockopt(SCTP_SOCKOPT_PEELOFF).
 */
typedef struct {
	sctp_assoc_t associd;
	int sd;
} sctp_peeloff_arg_t;

#endif /* __net_sctp_user_h__ */