reg_8xx.h

来自「linux 内核源代码」· C头文件 代码 · 共 43 行

/*
 * Contains register definitions common to PowerPC 8xx CPUs.  Notice
 */
#ifndef _ASM_POWERPC_REG_8xx_H
#define _ASM_POWERPC_REG_8xx_H

/* Cache control on the MPC8xx is provided through some additional
 * special purpose registers.
 */
#define SPRN_IC_CST	560	/* Instruction cache control/status */
#define SPRN_IC_ADR	561	/* Address needed for some commands */
#define SPRN_IC_DAT	562	/* Read-only data register */
#define SPRN_DC_CST	568	/* Data cache control/status */
#define SPRN_DC_ADR	569	/* Address needed for some commands */
#define SPRN_DC_DAT	570	/* Read-only data register */

/* Commands.  Only the first few are available to the instruction cache.
*/
#define	IDC_ENABLE	0x02000000	/* Cache enable */
#define IDC_DISABLE	0x04000000	/* Cache disable */
#define IDC_LDLCK	0x06000000	/* Load and lock */
#define IDC_UNLINE	0x08000000	/* Unlock line */
#define IDC_UNALL	0x0a000000	/* Unlock all */
#define IDC_INVALL	0x0c000000	/* Invalidate all */

#define DC_FLINE	0x0e000000	/* Flush data cache line */
#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
#define DC_SLES		0x05000000	/* Set little endian swap mode */
#define DC_CLES		0x07000000	/* Clear little endian swap mode */

/* Status.
*/
#define IDC_ENABLED	0x80000000	/* Cache is enabled */
#define IDC_CERR1	0x00200000	/* Cache error 1 */
#define IDC_CERR2	0x00100000	/* Cache error 2 */
#define IDC_CERR3	0x00080000	/* Cache error 3 */

#define DC_DFWT		0x40000000	/* Data cache is forced write through */
#define DC_LES		0x20000000	/* Caches are little endian mode */

#endif /* _ASM_POWERPC_REG_8xx_H */