⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ucc_fast.h

📁 linux 内核源代码
💻 H
字号:
/* * include/asm-powerpc/ucc_fast.h * * Internal header file for UCC FAST unit routines. * * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. * * Authors: 	Shlomi Gridish <gridish@freescale.com> * 		Li Yang <leoli@freescale.com> * * This program is free software; you can redistribute  it and/or modify it * under  the terms of  the GNU General  Public License as published by the * Free Software Foundation;  either version 2 of the  License, or (at your * option) any later version. */#ifndef __UCC_FAST_H__#define __UCC_FAST_H__#include <linux/kernel.h>#include <asm/immap_qe.h>#include <asm/qe.h>#include "ucc.h"/* Receive BD's status */#define R_E	0x80000000	/* buffer empty */#define R_W	0x20000000	/* wrap bit */#define R_I	0x10000000	/* interrupt on reception */#define R_L	0x08000000	/* last */#define R_F	0x04000000	/* first *//* transmit BD's status */#define T_R	0x80000000	/* ready bit */#define T_W	0x20000000	/* wrap bit */#define T_I	0x10000000	/* interrupt on completion */#define T_L	0x08000000	/* last *//* Rx Data buffer must be 4 bytes aligned in most cases */#define UCC_FAST_RX_ALIGN			4#define UCC_FAST_MRBLR_ALIGNMENT		4#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8/* Sizes */#define UCC_FAST_URFS_MIN_VAL				0x88#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8/* ucc_fast_channel_protocol_mode - UCC FAST mode */enum ucc_fast_channel_protocol_mode {	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F};/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */enum ucc_fast_transparent_txrx {	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000};/* UCC fast diagnostic mode */enum ucc_fast_diag_mode {	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000};/* UCC fast Sync length (transparent mode only) */enum ucc_fast_sync_len {	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000};/* UCC fast RTS mode */enum ucc_fast_ready_to_send {	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000};/* UCC fast receiver decoding mode */enum ucc_fast_rx_decoding_method {	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800};/* UCC fast transmitter encoding mode */enum ucc_fast_tx_encoding_method {	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300};/* UCC fast CRC length */enum ucc_fast_transparent_tcrc {	UCC_FAST_16_BIT_CRC = 0x00000000,	UCC_FAST_CRC_RESERVED0 = 0x00000040,	UCC_FAST_32_BIT_CRC = 0x00000080,	UCC_FAST_CRC_RESERVED1 = 0x000000C0};/* Fast UCC initialization structure */struct ucc_fast_info {	int ucc_num;	enum qe_clock rx_clock;	enum qe_clock tx_clock;	u32 regs;	int irq;	u32 uccm_mask;	int bd_mem_part;	int brkpt_support;	int grant_support;	int tsa;	int cdp;	int cds;	int ctsp;	int ctss;	int tci;	int txsy;	int rtsm;	int revd;	int rsyn;	u16 max_rx_buf_length;	u16 urfs;	u16 urfet;	u16 urfset;	u16 utfs;	u16 utfet;	u16 utftt;	u16 ufpt;	enum ucc_fast_channel_protocol_mode mode;	enum ucc_fast_transparent_txrx ttx_trx;	enum ucc_fast_tx_encoding_method tenc;	enum ucc_fast_rx_decoding_method renc;	enum ucc_fast_transparent_tcrc tcrc;	enum ucc_fast_sync_len synl;};struct ucc_fast_private {	struct ucc_fast_info *uf_info;	struct ucc_fast *uf_regs;	/* a pointer to memory map of UCC regs. */	u32 *p_ucce;		/* a pointer to the event register in memory. */	u32 *p_uccm;		/* a pointer to the mask register in memory. */#ifdef CONFIG_UGETH_TX_ON_DEMAND	u16 *p_utodr;		/* pointer to the transmit on demand register */#endif	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */	int stopped_tx;		/* Whether channel has been stopped for Tx				   (STOP_TX, etc.) */	int stopped_rx;		/* Whether channel has been stopped for Rx */	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx						    virtual fifo */	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx						    virtual fifo */#ifdef STATISTICS	u32 tx_frames;		/* Transmitted frames counter. */	u32 rx_frames;		/* Received frames counter (only frames				   passed to application). */	u32 tx_discarded;	/* Discarded tx frames counter (frames that				   were discarded by the driver due to errors).				   */	u32 rx_discarded;	/* Discarded rx frames counter (frames that				   were discarded by the driver due to errors).				   */#endif				/* STATISTICS */	u16 mrblr;		/* maximum receive buffer length */};/* ucc_fast_init * Initializes Fast UCC according to user provided parameters. * * uf_info  - (In) pointer to the fast UCC info structure. * uccf_ret - (Out) pointer to the fast UCC structure. */int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);/* ucc_fast_free * Frees all resources for fast UCC. * * uccf - (In) pointer to the fast UCC structure. */void ucc_fast_free(struct ucc_fast_private * uccf);/* ucc_fast_enable * Enables a fast UCC port. * This routine enables Tx and/or Rx through the General UCC Mode Register. * * uccf - (In) pointer to the fast UCC structure. * mode - (In) TX, RX, or both. */void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);/* ucc_fast_disable * Disables a fast UCC port. * This routine disables Tx and/or Rx through the General UCC Mode Register. * * uccf - (In) pointer to the fast UCC structure. * mode - (In) TX, RX, or both. */void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);/* ucc_fast_irq * Handles interrupts on fast UCC. * Called from the general interrupt routine to handle interrupts on fast UCC. * * uccf - (In) pointer to the fast UCC structure. */void ucc_fast_irq(struct ucc_fast_private * uccf);/* ucc_fast_transmit_on_demand * Immediately forces a poll of the transmitter for data to be sent. * Typically, the hardware performs a periodic poll for data that the * transmit routine has set up to be transmitted. In cases where * this polling cycle is not soon enough, this optional routine can * be invoked to force a poll right away, instead. Proper use for * each transmission for which this functionality is desired is to * call the transmit routine and then this routine right after. * * uccf - (In) pointer to the fast UCC structure. */void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);u32 ucc_fast_get_qe_cr_subblock(int uccf_num);void ucc_fast_dump_regs(struct ucc_fast_private * uccf);#endif				/* __UCC_FAST_H__ */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -