memory.h
来自「linux 内核源代码」· C头文件 代码 · 共 332 行
H
332 行
/* * linux/include/asm-arm/memory.h * * Copyright (C) 2000-2002 Russell King * modification for nommu, Hyok S. Choi, 2004 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Note: this file should not be included by non-asm/.h files */#ifndef __ASM_ARM_MEMORY_H#define __ASM_ARM_MEMORY_H/* * Allow for constants defined here to be used from assembly code * by prepending the UL suffix only with actual C code compilation. */#ifndef __ASSEMBLY__#define UL(x) (x##UL)#else#define UL(x) (x)#endif#include <linux/compiler.h>#include <asm/arch/memory.h>#include <asm/sizes.h>#ifdef CONFIG_MMU#ifndef TASK_SIZE/* * TASK_SIZE - the maximum size of a user space task. * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area */#define TASK_SIZE UL(0xbf000000)#define TASK_UNMAPPED_BASE UL(0x40000000)#endif/* * The maximum size of a 26-bit user space task. */#define TASK_SIZE_26 UL(0x04000000)/* * Page offset: 3GB */#ifndef PAGE_OFFSET#define PAGE_OFFSET UL(0xc0000000)#endif/* * The module space lives between the addresses given by TASK_SIZE * and PAGE_OFFSET - it must be within 32MB of the kernel text. */#define MODULE_END (PAGE_OFFSET)#define MODULE_START (MODULE_END - 16*1048576)#if TASK_SIZE > MODULE_START#error Top of user space clashes with start of module space#endif/* * The XIP kernel gets mapped at the bottom of the module vm area. * Since we use sections to map it, this macro replaces the physical address * with its virtual address while keeping offset from the base section. */#define XIP_VIRT_ADDR(physaddr) (MODULE_START + ((physaddr) & 0x000fffff))/* * Allow 16MB-aligned ioremap pages */#define IOREMAP_MAX_ORDER 24#else /* CONFIG_MMU *//* * The limitation of user task size can grow up to the end of free ram region. * It is difficult to define and perhaps will never meet the original meaning * of this define that was meant to. * Fortunately, there is no reference for this in noMMU mode, for now. */#ifndef TASK_SIZE#define TASK_SIZE (CONFIG_DRAM_SIZE)#endif#ifndef TASK_UNMAPPED_BASE#define TASK_UNMAPPED_BASE UL(0x00000000)#endif#ifndef PHYS_OFFSET#define PHYS_OFFSET (CONFIG_DRAM_BASE)#endif#ifndef END_MEM#define END_MEM (CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)#endif#ifndef PAGE_OFFSET#define PAGE_OFFSET (PHYS_OFFSET)#endif/* * The module can be at any place in ram in nommu mode. */#define MODULE_END (END_MEM)#define MODULE_START (PHYS_OFFSET)#endif /* !CONFIG_MMU *//* * Size of DMA-consistent memory region. Must be multiple of 2M, * between 2MB and 14MB inclusive. */#ifndef CONSISTENT_DMA_SIZE#define CONSISTENT_DMA_SIZE SZ_2M#endif/* * Physical vs virtual RAM address space conversion. These are * private definitions which should NOT be used outside memory.h * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. */#ifndef __virt_to_phys#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)#endif/* * Convert a physical address to a Page Frame Number and back */#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)#ifndef __ASSEMBLY__/* * The DMA mask corresponding to the maximum bus address allocatable * using GFP_DMA. The default here places no restriction on DMA * allocations. This must be the smallest DMA mask in the system, * so a successful GFP_DMA allocation will always satisfy this. */#ifndef ISA_DMA_THRESHOLD#define ISA_DMA_THRESHOLD (0xffffffffULL)#endif#ifndef arch_adjust_zones#define arch_adjust_zones(node,size,holes) do { } while (0)#endif/* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. * * This is the PFN of the first RAM page in the kernel * direct-mapped view. We assume this is the first page * of RAM in the mem_map as well. */#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)/* * These are *only* valid on the kernel direct mapped RAM memory. * Note: Drivers should NOT use these. They are the wrong * translation for translating DMA addresses. Use the driver * DMA support - see dma-mapping.h. */static inline unsigned long virt_to_phys(void *x){ return __virt_to_phys((unsigned long)(x));}static inline void *phys_to_virt(unsigned long x){ return (void *)(__phys_to_virt((unsigned long)(x)));}/* * Drivers should NOT use these either. */#define __pa(x) __virt_to_phys((unsigned long)(x))#define __va(x) ((void *)__phys_to_virt((unsigned long)(x)))#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)/* * Virtual <-> DMA view memory address translations * Again, these are *only* valid on the kernel direct mapped RAM * memory. Use of these is *deprecated* (and that doesn't mean * use the __ prefixed forms instead.) See dma-mapping.h. */static inline __deprecated unsigned long virt_to_bus(void *x){ return __virt_to_bus((unsigned long)x);}static inline __deprecated void *bus_to_virt(unsigned long x){ return (void *)__bus_to_virt(x);}/* * Conversion between a struct page and a physical address. * * Note: when converting an unknown physical address to a * struct page, the resulting pointer must be validated * using VALID_PAGE(). It must return an invalid struct page * for any physical address not corresponding to a system * RAM address. * * page_to_pfn(page) convert a struct page * to a PFN number * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * * pfn_valid(pfn) indicates whether a PFN number is valid * * virt_to_page(k) convert a _valid_ virtual address to struct page * * virt_addr_valid(k) indicates whether a virtual address is valid */#ifndef CONFIG_DISCONTIGMEM#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)#define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)#define PHYS_TO_NID(addr) (0)#else /* CONFIG_DISCONTIGMEM *//* * This is more complex. We have a set of mem_map arrays spread * around in memory. */#include <linux/numa.h>#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn)#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)#define pfn_valid(pfn) \ ({ \ unsigned int nid = PFN_TO_NID(pfn); \ int valid = nid < MAX_NUMNODES; \ if (valid) { \ pg_data_t *node = NODE_DATA(nid); \ valid = (pfn - node->node_start_pfn) < \ node->node_spanned_pages; \ } \ valid; \ })#define virt_to_page(kaddr) \ (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES)/* * Common discontigmem stuff. * PHYS_TO_NID is used by the ARM kernel/setup.c */#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT)/* * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory * and returns the mem_map of that node. */#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))/* * Given a page frame number, find the owning node of the memory * and returns the mem_map of that node. */#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))#ifdef NODE_MEM_SIZE_BITS#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1)/* * Given a kernel address, find the home node of the underlying memory. */#define KVADDR_TO_NID(addr) \ (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)/* * Given a page frame number, convert it to a node id. */#define PFN_TO_NID(pfn) \ (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))/* * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory * and returns the index corresponding to the appropriate page in the * node's mem_map. */#define LOCAL_MAP_NR(addr) \ (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)#endif /* NODE_MEM_SIZE_BITS */#endif /* !CONFIG_DISCONTIGMEM *//* * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die. */#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)/* * Optional device DMA address remapping. Do _not_ use directly! * We should really eliminate virt_to_bus() here - it's deprecated. */#ifndef __arch_page_to_dma#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr))#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr)))#else#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page))#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr))#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr))#endif/* * Optional coherency support. Currently used only by selected * Intel XSC3-based systems. */#ifndef arch_is_coherent#define arch_is_coherent() 0#endif#endif#include <asm-generic/memory_model.h>#endif
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?