📄 regs-wan.h
字号:
/* * include/asm-arm/arch-ks8695/regs-wan.h * * Copyright (C) 2006 Andrew Victor * * KS8695 - WAN Registers and bit definitions. * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */#ifndef KS8695_WAN_H#define KS8695_WAN_H#define KS8695_WAN_OFFSET (0xF0000 + 0x6000)#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)/* * WAN registers */#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */#define KS8695_WMDRXC (0x04) /* DMA Receive Control */#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */#define KS8695_WMAL (0x18) /* MAC Station Address Low */#define KS8695_WMAH (0x1c) /* MAC Station Address High */#define KS8695_WMAAL_(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */#define KS8695_WMAAH_(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High *//* DMA Transmit Control Register */#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */#define WMDTXC_WMTE (1 << 0) /* TX Enable *//* DMA Receive Control Register */#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */#define WMDRXC_WMRA (1 << 2) /* Receive All */#define WMDRXC_WMRE (1 << 0) /* RX Enable *//* Additional Station Address High */#define WMAAH_E (1 << 31) /* Address Enabled */#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -